• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.215-219
• /
• 2008

Recently, a container shipping volume has increased dramatically and continued on a trend of rapid growth, and so the number of container handled at the port increase. therefore, it's increasing about concern of harbor automatism to save distribution costs in harbor. harbor automatism classifies into four large automatism's, gate automatism by using RFID that trailer come with burdening the container to be loaded on ships go though with RFID and Quay-Side container crane automatism that treats cargos loading on ships and automatism of CG that loads containers from yard, and automatism of container transporters that carries containers in between gates. To increase the using efficiency of harbor, detecting exact location of yard crane is very important matter. In this paper, propose about yard crane automatism applied UWB Location system and the development direction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.907-910
• /
• 2007

Recently, a container shipping volume has increased dramatically and continued on a trend of rapid growth, and so the number of container handled at the port increase. therefore, it's increasing about concern of harbor automatism to save distribution costs in harbor. harbor automatism classifies into four large automatism's, gate automatism by using RFID that trailer come with burdening the container to be loaded on ships go though with RFID and Quay-Side container crane automatism that treats cargos loading on ships and automatism of CG that loads containers from yard, and automatism of container transporters that carries containers in between gates. To increase the using efficiency of harbor, detecting exact location of yard crane is very important matter. In this paper, it intends to discuss about yard crane automatism applied UWB Ranging system and bring up the development direction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.277-281
• /
• 1997

Reliab~l~ty englneerlng IS regarded as the major and important roll for all Industry And advanced nianufactur~ng systems w~th h~gh speed and lntell~gent ha\\ulcorner been dcvelop~ng for betterment of lnachln~ng db~l~ty In th~study, Me have rystem~~ed c\, ~luat~on c r f relidb~litl for nldchlntry system We proposed the rel~ab~l~ty asvxmcnt and dci~yned and manufactured r~ildb~llty tcst-bed to eualuate rcl~dbil~ty In ddd~t~on we acquired relldb~l~ty data uslng test-bed sydem and mde database to handle relrab~l~t) data And also he not only use rel~ab~l~ty data by andlyzlng rel~ab~l~ty, but also apply design revlew method usmg analycing crltlcal unlt5 of machlnery system From th~s stud), he u ~ l l expect to gu~de md Increase the rel~ab~l~t) englneerlng in devclop~ng and procerslng phase of h~gh qualrty product

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1668-1673
• /
• 2007

In light of the growing traffic congestion problem and congestion cost, the container transport by railway has to be increased. The freight transport by railway can have decided advantages over trucks in terms of energy efficiency, emissions and cost for certain freight movements, just as transportation in the metropolitan region can have great advantages over driving truck. But the freight transport by truck should gain significant mobility benefits from a freight railway system. Thus, the DMT(Dual Mode Trailer) transport system which is coupled railway transport advantages with load transport advantages has been developed and used in the european countries. The DMT transport will therefore serve the areas required by transport organizers. This paper describes the various DMT transport systems and its strength and weakness.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.570-574
• /
• 2008

The 'gate non-stop system utilizing RFID (900MHz)', which is the core of this research, is the system which connects RFID to recognize the vehicle information without stopping when a vehicle (trailer) passes a gate to carry in or out containers in a terminal and automatically provides the container information provided by the terminal for the RFLDU device installed in the vehicle.In order to design and implement this, the RFID technical section uses a UHF band (900MHz) RFID tag and a reader and implements a RFID middleware and an application program for smooth data collection and execution (operation). In addition, the system stability was verified through experiments and operations of the system implemented in this research at real harbors/quays, and based on the verified result, the maximization of vehicle (trailer) and terminal productivity and the reduction of distribution cost are expected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1279-1287
• /
• 2014

The Korean government establishes a strategy to develop the Busan New Port as a world ranking two transit-oriented port. This paper aims at presenting an efficient inter-terminal transport (ITT) system in the Busan New Port as a method of achieving the government strategy. First, it presents results of long term forecast for the inter-terminal transportation volume in the port. Second, it proposes two systems to treat ITT in the port; Double stack Multiple Trailer System (DMTS) and Rail-based transportation system. The implementation methods in the port are introduced in detail for the both systems, and the required number of the systems and costs are calculated for implementation of both the systems. B/C for DMTS is analyzed to 3.7, moreover unit-fare per [$ton{\cdot}km$] can is lowered to 67% against current fare. DMTS is shown to highly potential for efficient ITT in the port.

• Journal of Korean Port Research
• /
• v.7 no.1
• /
• pp.43-58
• /
• 1993

There has been fast progress in economy in Korea derived by a consecutive five-year plan program for economic development started in the early 1960's. In the field of transportation, rapid changes in the technological environment of transportation and communication have brought a revolution of the transport system, of which inter-modal transportation through containerisation is typical. Because of the rapidly growing traffic volumes of cargo, especially container traffic, and lack of investment into transport infrastructure in the past, both road and railway are beyond their capacity. As a result, the public-road network has suffered a serious congestion problem. For instance, in relation to the corridor between Seoul and Pusan, today, it takes about 14 hours for the journey of container trailer through Kyongbu Expressway, for which it used to take only 7 hours in 1986. For the railway, though the congestion problem is not very serious compared with the road sector, a shortage of capacity on certain main lines has emerged as a problem as railway traffic has increased. Furthermore, the further expansion of the system in near future is difficult due to burden of higher construction the cost. Unlike these two modes, coastal shipping, which has been paid relatively less attention for commodity transport in Korea, shows no constraint in this respect. In addition, it is the most cost efficient mode of transport. This work therefore aims to make a proposal for the alternative inland transportation mode, which is to promote the coastal transport of container. Three obstructing factors for the promotion of the coastal transport are investigated and some solutions for those are suggested as follows : First, it appears to be essential to provide exclusive ports for the coastal shipping, that comply with simplification, specialization and rationalization. The optimum size of berths on the exclusive ports in Pusan port is estimated as 16-20. We found that it needs periodical study and publicity on the advantages from the adoption of the coastal mode. Inducing competition in the coastal shipping market is also necessary. For the supply of the fleet in the coastal shipping, chartering of the surplus ships in the oversea shipping is found to be more desirable than new shipbuilding. Second, to solve the fragmentation of the companies which wish to participate in the coastal transport, government has to implement the subsidy policy. The encouragement of participation of the shipping lines engaging in Korea-Japan run and Korea-East South Asia run, into coastal shipping also needs to be considered cautiously. Third, simplification of the document for entry in ports is needed for rational coastal shipping management. We can use B/L (Bill of Lading) for coastal shipping as a prerequisite to get the indemnity by P & I Club. The reduction of the government controls on entering and leaving the ports also needs.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.348-356
• /
• 2009

The objective of this paper is to estimate the DMT utility function for the transportation mode choice using SP survey. With the freight OD data the estimated utility function can be used as a basic data for forecasting DMT market. 3 alternatives of transportation mode are considered in SP survey; railway, road and DMT. The utility functions are developed according to the freight items, which are container, steel and chemical product. In this study the attribute variable are chosen as time, cost and reliability. The number of level for attribute variables are 3. The high valve is determined as +10% above the standard and the low value -20% below the standard.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.193-199
• /
• 2023

In this study, an analysis was conducted to analyze the structural stability of the piezoelectric power generation module and to determine the optimal burying hole interval for concrete, the installation site of the power generation module. A piezoelectric element refers to a functional ceramic having a piezoelectric direct effect that converts mechanical energy into electrical energy and a piezoelectric reverse effect. In the analysis of the piezoelectric power generation module, the load condition was applied with about 16 tons and a total of 10 wheels in consideration of the container trailer. The purpose was to evaluate the stability of major components of the piezoelectric power generation module through finite element analysis. In order to determine the optimal burying location of the concrete ground for burying the piezoelectric power generation module, the stability of the ground structure according to the distance of the holes was determined. As a result of the analysis, the maximum stress of the piezoelectric power generation module was generated in the support spring, showing a stress of about 276.7 MPa. It was found that the spacing of holes for embedding the piezoelectric power generation module should be set to a minimum of 100 mm or more.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.221-227
• /
• 2005

Aim of this study is to investigate an aerodynamic effect of a drag-reducing device on a heavy-duty truck. The vehicle experiences two different kinds of aerodynamic forces such as drag and uplifting force (or downward force) as it is traveling straight forward at constant speed. The drag force on a vehicle may cause an increase of the rate of fuel consumption and driving instability. The rolling resistance of the vehicle may be increased as result of the negative uplifting or downward force on the vehicle. A device named roof-fairing system has been applied to examine the reduction of aerodynamic drag force on a heavy-duty truck. As for a engineering design information, the drag-reducing system should be studied theoretically and experimentally for the best efficiency of the device. Four different types of roof-fairing model were considered in this study to investigate the aerodynamic effect on a model truck. The drag and downward force generated by vehicle has been obtained from numerical calculation conducted in this study. The forces produced on four fairing models considered in this study has been compared each other to evaluate the best fairing model in terms of aerodynamic performance. The result shows that the roof-fairing mounted truck has bigger negative uplifting or downward force than that of non-mounted truck in all speed ranges, and drag force on roof-fairing mounted truck has smaller than that of non-mounted truck. The drag coefficient $(C_D)$ of the roof-fairing mounted truck (Model-3) is reduced up to $41.3\%$ than that of non-mounted trucks (Model-1). A downward force generated by a roof-fairing mounted on a truck is linearly proportional to the rolling resistance force. Therefore, the negative lifting force on a heavy-duty truck is another important factor in aerodynamic design parameter and should be considered in the design of a drag-reducing device of a tractor-trailer. According to the numerical result obtained from present study, the drag force produced by the model-3 has the smallest of all in all speed ranges and has reasonable downward force. The smaller drag force on model-3 with 2/3h in height may results of smallest thickness of boundary layer generated on the topside of the container and the lowest intensity of turbulent kinetic energy occurs at the rear side of the container.