• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.29-35
• /
• 2008

This study is conducted to provide the proper analysis method to evaluate the stability of a container crane under wind load. Two analysis method, namely structure analysis and fluid-structure interaction, are adopted to evaluate the stability of a container crane in this investigation. To evaluate the effect of wind load on the stability of the crane, 50-ton class container crane widely used in container terminals is adopted for analysis model and 19-values are considered for wind direction as design parameter. We conduct structure analysis and fluid-structure interaction for a container crane with respect to the wind direction using ANSYS and CFX. Then we compare the uplift forces yielded from two analysis with it yielded from wind tunnel test. The results are as follows: 1) A correlation coefficient between structure analysis and wind tunnel test is lower than 0.65(as $0.29{\sim}0.57$), but between fluid-structure interaction and wind tunnel test is higher than 0.65(as $0.78{\sim}0.86$). 2) There is low correlation between structure analysis and wind tunnel test but very high correlation between fluid-structure interaction and wind tunnel test.

• Wind and Structures
• /
• v.30 no.4
• /
• pp.405-421
• /
• 2020

Quayside container cranes are important delivery machineries located in the most frontiers of container terminals, where strong wind attacks happen occasionally. Since the previous researches on quayside container cranes mainly focused on the mean wind load and static response characteristics, the fluctuating wind load and dynamic response characteristics require further investigations. In the present study, the aerodynamic wind loads on quayside container cranes were obtained from wind tunnel tests. The probabilistic and spectral models of the fluctuating aerodynamic loads were established. Then the joint probabilistic distributions of dynamic wind-induced responses were derived theoretically based on a series of Gaussian and independent assumption of resonant components. Finally, the results were validated by time domain analysis using wind tunnel data. It is concluded that the assumptions are acceptable. And the presented approach can estimate peak dynamic sliding force, overturning moments and leg uplifts of quayside container cranes effectively and efficiently.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.895-904
• /
• 2012

Today, the competition for hub-port is getting fierce and the shipping liners have enjoyed the increased bargaining power over the terminal operators through the mergers & acquisitions (M&A) and strategic alliances. This result leads the competition among terminal operators to attract liner companies and cargoes in their terminals. In demand side, however, there is a limited container cargo volume to handle because of a steady growth of cargo traffic. While, in supply side, continuous development of port terminals increased more competition among ports or terminals for cargoes. In particular the terminal operating market of Busan port is distorted because of the cargo competition between Busan North-port and Newport. The main purpose of this study is to suggest the stabilization measures of container terminal operating market in Busan port through analysis of the terminal operation market structures and market survey analysis method. For stabilizing the container terminal market, this study suggests the improvement of the legal and institutional system such as improvement in determining and reporting system of stevedoring tariff, establishment of fair competition rules etc., the introduction of port pooling system and adoption of volume-linked terminal lease system with cargo volume ceiling system for each terminal operator.

• Journal of Korea Port Economic Association
• /
• v.34 no.2
• /
• pp.69-82
• /
• 2018

The number of ships serviced at the container terminals in Busan is increasing by 2.9% per year. In spite of the increase in calling ships, there are no official records of waiting rate by the port authority. This study attempts to compare the theoretical ship waiting ratio and actual ship waiting ratio. The actual ship waiting ratio of container terminals is acquired from the 2014 to 2016 data of PORT-MIS and Terminal Operating System (TOS). Furthermore, methods and procedures to measure the actual ship's waiting rate of container terminal are proposed for ongoing measurement. In drawing the theoretical ship waiting ratio, the queuing theory is applied after deploying the ship arrival probability distribution and ship service probability distribution by the Chi Square method. As a result, the total number of ships waiting in a terminal for three years was 587, the average monthly service time and the average waiting time was 13.8 hours and 17.1 hours, respectively, and the monthly number of waiting ships was 16.3. Meanwhile, according to the queuing theory with multi servers, the ship waiting ratio is 31.1% on a 70% berth occupancy ratio. The reason behind the huge gap is the congested sailing in the peak days of the week, such as Sunday, Tuesday, and Wednesday. In addition, the number of waiting ships recorded on Sundays was twice as much as the average number of waiting ships.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.357-361
• /
• 1999

Currently, many research projects are focusing on automation of various equipment such as cranes and AGV's for automated container terminals. However, for more productivity of these terminals, integration of the required equipment is most crucial as proved in Computer Integrated Manufacturing (CIM). The integration requires information exchange via a type of network interconnecting various pisces of equipment. In order to better design such networks, this paper presents the requirements, available protocols, and basic network structure for an communication network in an automated crane terminal

• The Journal of Industrial Distribution & Business
• /
• v.11 no.10
• /
• pp.75-89
• /
• 2020

Purpose: The container terminal is an area that plays an important role in the country's import and export. As the volume of containers increased worldwide, competition between terminals became fiercer, and increasing the productivity of terminals became more important. Re-handling is a serious obstacle that lowers the productivity of terminal. There are two ways to reduce re-handling in the terminal yard. The first method is to load containers in terminal yards using effective carry-in algorithms that reduce re-handling. The second method is to carry out effective remarshalling. In this paper, the performance of various carry-in algorithms and various remarshalling algorithms are reviewed. Next, we try to find the most effective combination of carry-in algorithm and remarshalling algorithm. Research design, data and methodology: In this paper, we analyze the performance of the four carry-in algorithms, AP, MDF, LVF, RP and the four remarshalling algorithms, ASI, ASI+, ASO, ASO+. And after making all the combinations of carry-in algorithms and remarshalling algorithms, we compare their performance to find the best combination. To that end, many experiments are conducted with eight types of 100 bays through simulation. Results: The results of experiments showed that AP was effective among the carry-in algorithms and ASO+ was effective among remarshalling algorithms. In the case of the LVF algorithm, the effect of carrying in was bad, but it was found to be effective in finding remarshalling solution. And we could see that ASI+ and ASO+, algorithms that carry out remarshalling even if they fail to find remarshalling solution, are also more effective than ASI and ASO. And among the combinations of carry-in algorithms and remarshalling algorithms, we could see that the combination of AP algorithm and ASO+ algorithm was the most effective combination. Conclusion: We compared the performance of the carry-in algorithms and the remarshalling algorithms and the performance of their combination. Since the performance of the container yard has a significant effect on the performance of the entire container terminal, it is believed that the results of this experiment will be effective in improving the performance of the container terminal when carrying-in or when remarshalling.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.227-234
• /
• 2020

One of the most important operational goals in container terminals is to maximize the quay side productivity by minimizing the turnaround times of the vessels, for which the operations of the quay cranes (QC) to load/unload containers onto/from the vessels should be conducted efficiently without delays. This paper suggests using a policy-based dispatching method for YTs (Yard Tractor) that deliver containers between QCs and the storage yard. The goal of using such a dispatching policy is to maximize the efficiency of the YT operation and accordingly to minimize the QC delays because of late arrivals of the YTs. In particular, in this paper, we modified the previously proposed policy for its application to real container terminal and verified the effect through simulation experiments using real terminal data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.255-256
• /
• 2007

In case of inappropriate stacking position of the container taking in container yard, the working time for the container would be delayed in taking out because of the occurrence of the re-handle and the increase of the crane moving time. We have to take into account a variety of elements like the crane interference, the container group and stacking height in order to determine the optimal stacking position and decide the weight reflecting the importance of these criteria. We propose the dynamic weight adjustment algorithm for the stacking policy criteria employing the online search in this research.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.621-628
• /
• 2008

Container terminals keenly compete with one another because of the continuous increase of container flows and the appearance of large-sized vessels. Major cargo handling equipment manufacturers are interested in the development of new conceptual equipment to greatly increase its productivity. In this study, a two-phase procedure is suggested for selecting the optimal development alternatives, when various development alternatives for container cranes are given. The first phase removes the alternatives that violate essential requirements and the second phase selects final alternatives by the evaluation of experts and the linear assignment method. Finally, a case applying the procedure is provided.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.278-288
• /
• 2016

Automation ensures accurate and well-organized container transportation in container terminals. This paper addresses operational issues such as equipment scheduling and the coordination between various pieces of equipment in a rail-based automated container terminal. Containers are relayed using multiple types of equipment from road trucks to a vessel and vice versa. Therefore, handshaking is required during a container transfer between different pieces of equipment. Synchronization between the schedules of all the equipment is important to reduce equipment waiting times and the time required for transporting containers, which results in a short turnaround time for a vessel. This paper proposes an integrated control system with the objective of synchronizing the operations of different types of equipment, provides a list of decisions to be made by the control module of each type of equipment, and shows all the required information transfers between control modules. A scheme for the integrated scheduling of multiple types of equipment is proposed. The decisions made by each control module in a real-time fashion are listed with detailed explanations, and the information transfer between managers in a real-time situation at the proposed terminal is described.