• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.819-820
• /
• 2006

This paper presents the 3D finite element analysis of contactless power supply with linear servo motor. The voltage source is used to analyze the characteristics of contactless power supply. The primary, secondary self and leakage inductances and the capacitances of a resonant circuit are calculated by the previous finite element analysis are used. Also the driving circuit to supply the power to the linear servo motor is designed. The characteristics analysis of contactless power supply considering the linear servo motor is done.

• 조명전기설비학회논문지
• /
• 제22권2호
• /
• pp.80-84
• /
• 2008

본 논문은 다중권선의 비접촉 변압기를 이용한 비접촉 전력공급 방식을 제안한 논문이다. 논문에서 제안한 전력공급 방식은 엘리베이터 카에 신뢰성 높은 전력을 전송하기 위하여 공진주파수 추적 기법을 사용하였다. 제안된 시스템을 검증하기 위하여 ICAP4와 Maxwell을 사용하여 시뮬레이션을 수행하였으며, 5[kW]급 비접촉 전력전송시스템을 제작하여 실험을 수행하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.40-46
• /
• 2012

This paper presents contactless power supply systems using the Valtchev model in transportation systems. The major drawback of contactless systems is that the efficiency is lower than that of contact systems. The coupling coefficient of the contactless transformer is the most influential parameter on the system efficiency. Here, a new computer model for the contactless transfer system developed in the Korea Railroad Research Institute is presented. Also, simulations of the old model and the new model are compared with the prototype measurement to assure the model validity.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권1호
• /
• pp.33-39
• /
• 2005

Comparing with the conventional transformer without the air gap, a contactless transformer with the large air gap between the long primary winding and the secondary winding has increased leakage inductance and reduced magnetizing inductance. For transferring the primary power to the secondary one, the high frequency series resonant converter has been widely used for the contactless power supply system with the large air gap and the increased leakage inductance of the contactless transformer However, the high frequency series resonant converter has the disadvantages of the low efficiency and high voltage gain characteristics in the overall load range due to the large air gap and the circulating magnetizing current. In this paper, the characteristics of the high efficiency and unit voltage gain are revealed in the proposed three-level series-parallel resonant converter. The results are verified on the simulation based on the theoretical analysis and the 5kW experimental prototype.

• 전력전자학회논문지
• /
• 제17권5호
• /
• pp.445-452
• /
• 2012

The impurity detection method applied to existing discriminated the normality(R, L, C) and impurity(Metal) load using mutual RFID/ID method in the contactless power supply in which the primary side and the secondary side are completely separation by using the contactless transformer. However, this kind of system is caused the high cost of the system and complexity of control. Therefore, in this paper was proposed the contact-less power transfer using the primary current that determine normality or impurity load by compare the primary current Amplitude to reference quantity value and design the 3[W] contact-less power transfer and conduct an experiment for demonstrate the validity.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.423-426
• /
• 2011

This paper presents numerical analysis and design of high power contactless transformer with a large air-gap for moving on a guided linear track which is appropriate for high-speed train or MAGLEV. The system has the typical characteristics of large leakage inductance, small magnetizing inductance, and low coupling coefficients giving rise to lower power transfer efficiency, which have been compensated by the purposely-designed contactless transformer coupled with the resonant converter modulating with high switching frequency. In particular, the best model selected from the generated six design candidates has been applied for 3D Finite Element Analysis (FEA) investigating on iron loss to evaluate the overall system efficiency.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.483-491
• /
• 2012

It is expected that, in the future, DC power service will be widely used for photovoltaic home power generation systems, since DC consuming devices are ever increasing. Instead of using multiple converters to convert DC to AC and then AC to DC, the power service could solely be based on DC. This would eliminate the need for converters, reducing the cost, complexity, and possibly increasing the efficiency. However, configuration of direct DC power service with mechanical contacts can cause spark voltage or an electric shock when the switch is turned on and off. To solve these problems, in this paper, a contactless power supply for a DC power service that can transfer electric power produced by photovoltaics to the home electric system using magnetic coupling instead of mechanical contacts has been proposed. The proposed system consists of a ZVS boost converter, a half-bridge LLC resonant converter, and a contactless transformer. This proposed contactless system eliminates the use of DC switches. To reduce the stress and loss of the boost converter switching devices, a lossless snubber with coupled inductor is applied. In this paper, a switching frequency control technique using the contactless voltage sensing circuit is also proposed and implemented for the output voltage control instead of using additional power regulators. Finally, a prototype consisted of 150W boost converter has been designed and built to demonstrate the feasibility of the proposed contactless photovoltaic DC power service. Experimental results show that 74~83% overall system efficiency is obtained for the 10W~80W load.

• 조명전기설비학회논문지
• /
• 제25권10호
• /
• pp.23-27
• /
• 2011

In this paper, material handing cleanroom stocker system for thin film solar cell line of photovoltaic industry and liquid crystal display line of flat panel display industry was selected for the study. Optimum solution for stocker system's CPS(Contactless Power Supply) is approached by changing the motion pattern, optimizing design & production, and analyzing characteristics of the power system. As a result, acceleration time of X-Axis changed from 3 sec to 4 sec, changed the input characteristic of CPS within approximately 11[kW]. This result shows that extending acceleration time of the X-Axis in Stocker Crane's motion pattern can reduce the capacity of the CPS, thus saving the manufacturing cost.

• 전력전자학회논문지
• /
• 제16권3호
• /
• pp.219-226
• /
• 2011

기존의 무접점 전원공급 시스템은 비접촉 변압기의 1, 2차측 간 RFID/ID 통신 방식을 이용하여 무접점으로 전원을 공급하고, 이물질을 감지한다. 이러한 시스템은 ID 신호를 발생시켜주는 회로가 추가 되어야 하고, 2차측에서 발생한 ID 신호의 인식과 제어는 1차측에서 수행하기 때문에 회로의 복잡성이 야기된다. 따라서 본 논문에서는 전압위상을 이용한 무접점 전원공급 시스템을 제안하고, 타당성을 증명하기 위하여 3[W]급 무접점 전원공급 장치를 설계하고, 시뮬레이션 및 실험을 수행하였다.

• 조명전기설비학회논문지
• /
• 제24권2호
• /
• pp.77-85
• /
• 2010

최근, LCD(Liquid Crystal Display) 산업에서 클린룸의 규모가 커짐에 따라 Stocker 시스템의 사이즈가 커지고 길이가 장거리화 되고 있다. 이에 제조업체는 생산수율을 높이기 위해 Stocker 시스템의 전체 택타임을 줄이기 위한 방안으로 Stocker 시스템의 속도 증가와 고유가 시대에 여러 장비들에 대한 에너지 절약을 통한 공장 운영비용이 최소화되도록 요구하고 있다. 따라서 본 논문은 차세대 Stocker 시스템의 에너지 절감과 이송 속도증가에 따른 고효율 비접촉 전원시스템(CPS, Contactless Power Supply)의 최적설계를 제안하고, 에너지 절감을 위한 비접촉 전원시스템의 시제품을 제작하여 부하인 크레인의 여러 운전 패턴에 따른 비접촉 전원시스템의 실증시험과 입/출력 특성, 효율 개선에 따른 최적화로 개발된 비접촉 전원 시스템의 에너지 절감 효과에 대하여 서술하였다.