• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 추계학술발표대회 논문집
• /
• pp.50-56
• /
• 2005

The robot systems are widely used in the many industrial field as well as welding manufacturing. The essential tasks to operate the welding robot are the acquisition of the position and/or shape of the parent metal. For the seam tracking or the robot tracking, many kinds of contact and non-contact sensors are used. Recently, the vision is most popular. In this paper, the development of the system which measures the shape of the welding part is described. This system uses the line-type structured laser diode and the vision sensor. It includes the correction of radial distortion which is often found in the image taken by the camera with short focal length. The Direct Linear Transformation (DLT) method is used for the camera calibration. The three dimensional shape of the parent metal is obtained after simple linear transformation. Some demos are shown to describe the performance of the developed system.

• Steel and Composite Structures
• /
• 제42권2호
• /
• pp.151-159
• /
• 2022

This study discusses a hypothetical method for tracking the propagation damage of Carbon Reinforced Fiber Plastic (CRFP) components underneath vibration fatigue. The High Cycle Fatigue (HCF) behavior of composite materials was generally not as severe as this of admixture alloys. Each fissure initiation in metal alloys may quickly lead to the opposite. The HCF behavior of composite materials is usually an extended state of continuous degradation between resin and fibers. The increase is that any layer-to-layer contact conditions during delamination opening will cause a dynamic complex response, which may be non-linear and dependent on temperature. Usually resulted from major deformations, it could be properly surveyed by a non-contact investigation system. Here, this article discusses the scanning laser application of that vibrometer to track the propagation damage of CRFP components underneath fatigue vibration loading. Thus, the study purpose is to demonstrate that the investigation method can implement systematically a series of hypothetical means and dynamic characteristics. The application of the relaxation method based on numerical simulation in the Artificial Intelligence (AI) Evolved Bat (EB) strategy to reduce the dynamic response is proved by numerical simulation. Thermal imaging cameras are also measurement parts of the chain and provide information in qualitative about the temperature location of the evolution and hot spots of damage.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.131-139
• /
• 1996

The response of the arc sensor using the welding current and/or welding voltage as its outputs has been obtained by the analysis and/or experiments of the static characteristics of arc sensor. But in order to improve the reliability of arc sensor, it is necessary to know its dynamic characteristics. So in this paper, it is presented the dynamic model of arc sensor including the power source, arc voltage, electrode burnoff rate, and wire feed rate. A numerical simulation of the dynamic model of arc sensor was implemented, computing the welding current with input of CTWD. The results of computer simulations and experiments of $CO_2$arc welding showed that a linear relationship between weaving center - weld line distance and current area difference was established. Additionally, a real-time weld seam tracking system interfaced with industrial welding robot was constructed, the result of the weld seam tracking experiment for weld line with an initial offset error of 5$^{\circ}$was good.

• 한국조명전기설비학회지:조명전기설비
• /
• 제1권2호
• /
• pp.62-69
• /
• 1987

이 논문은 Phenolic 수지의 Tracking파괴의 CTI에 관한 고찰로써 전극재료의 일부가 누설재료에 의하여 침식되기 때문에 tracking파괴를 증진시키며 다음과 같은 영향을 받는다. $\circled1$절연재료에서는 C. T. I의 값이 350정도에서는 현재까지 규정하고 있는 백금전극보다도 황동전극이 더욱 근사한 값을 얻을 수 있었다. $\circled2$C. T. I의 값은 전해액의 저항율과는 무관하다. $\circled3$시요표면의 접촉각이 증가함에 따라 Corona 개시전압과 C. T. I의 값은 증가한다.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.122-131
• /
• 1995

An automatic welding equipment for thick plates requires the capability of the seam tracking of the weld line which often includes misalignment of the workpiece and variation of groove width. In this study, an automatic welding equipment and control algorithms based on the arc sensor were proposed for the GMA welding of thick plates which had misalignment and gap variation. The developed system being constituted with 5 axis can be automatically controlled by computer and also automnatically set the welding conditions such as welding current, and voltage. The proposed algorithms for the seam tracking in multi-pass welding of the thick plates were constituted as follows : the detection of weaving-end point for findng the variation of groove width, the control of welding velocity for acquiring a constant thickness deposition of weld metal, and the calculation of groove width and height of an arbitrary pass in the multi-pass weld. As results of the application of the system, it was revealed that the system had a good capability in seam tracking and made an excellent weld quality in V groove butt joint.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.29-32
• /
• 1999

Korea Multi-Purpose SATellite(KOMPSAT) is scheduled to be launched by TAURUS launch vehicle in November, 1999. Tracking, Telemetry and Command(TT&C) operation and the flight dynamics support should be performed for the successful Launch and Early Orbit Phase(LEOP) operation. After the first contact of the KOMPSAT spacecraft, initial orbit determination using ground based tracking data should be performed for the acquisition of the orbit. Although the KOMPSAT is planned to be directly inserted into the Sun- synchronous orbit of 685 km altitude, the orbit maneuvers are required fur the correction of the launch vehicle dispersion. Flight dynamics support such as orbit determination and maneuver planning will be performed by using KOMPSAT Mission Analysis and Planning Subsystem(MAPS) in KOMPSAT Mission Control Element(MCE). The KOMPSAT MAPS have been jointly developed by Electronics and Telecommunications Research Institute(ETRI) and Hyundai Space & Aircraft Company(HYSA). The KOMPSAT MCE was installed in Korea Aerospace Research Institute(KARI) site for the KOMPSAT operation. In this paper, the orbit determination and maneuver planning are introduced and simulated for the KOMPSAT spacecraft in LEOP operation. Initial orbit determination using short arc tracking data and definitive orbit determination using multiple passes tracking data are performed. Orbit maneuvers for the altitude correction and inclination correction are planned for achieving the final mission orbit of the KOMPSAT.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1056-1066
• /
• 2016

Wireless power transfer (WPT) technology is now recognized as an efficient means of transferring power without physical contact. However, frequency detuning will greatly reduce the transmission power and efficiency of a WPT system. To overcome the difficulties associated with the traditional frequency-tracking methods, this paper proposes a Direct Phase Control (DPC) approach, based on the Second-Order Generalized Integrator Phase-Locked Loop (SOGI-PLL), to provide accurate frequency-tracking for WPT systems. The DPC determines the phase difference between the output voltage and current of the inverter in WPT systems, and the SOGI-PLL provides the phase of the resonant current for dynamically adjusting the output voltage frequency of the inverter. Further, the stability of this control method is analyzed using the linear system theory. The performance of the proposed frequency-tracking method is investigated under various operating conditions. Simulation and experimental results convincingly demonstrate that the proposed technique will track the quasi-resonant frequency automatically, and that the ZVS operation can be achieved.

• 방송공학회논문지
• /
• 제27권5호
• /
• pp.685-693
• /
• 2022

디지털 전환과 비대면 소통 플랫폼에 대한 요구로 메타버스가 주목받고 있지만, 원활한 의사소통을 돕는 대화 시스템이 아직 메타버스에서는 널리 적용되지 않았다. 본 연구에서는 메타버스에 대화 시스템을 적용하는 경우 메타버스에서의 주변 상황에 대한 정보를 이용하여 기존의 대화 상태를 수정하는 방법을 제안한다. 대화와 상황에 대한 정보를 모두 활용하는 본 모델은 대화 상태를 추적하는 모듈과 상황 상태를 추적하는 모듈, 그리고 추적한 상황 상태와 대화 상태를 비교하여 수정하는 알고리즘으로 구성된다. 사용자의 의도를 재확인하는 대화가 추가됨에 따라 잘못된 대화 상태를 수정할 수 있고, 대화 시스템의 정확도 향상이 가능하다.

• 문화기술의 융합
• /
• 제8권2호
• /
• pp.367-372
• /
• 2022

최근 뉴노멀시대가 도래하면서 실감형 기술과 언택트 기술은 사회적 관심을 받고 있다. 하지만 헤어 스타일링 분야는 헤어 시뮬레이션을 중점으로 헤어 자체의 연출이나, 개별적인 움직임, 모델링에 초점을 두고 있다. 시대적 요구와 개선된 실습환경 조성을 위해 본 연구에서는 비대면 헤어 스타일링 VR 시스템을 제안하였다. 이론 고찰에서는 기존 헤어 컷 연구 사례에 대해 조사하였다. 기존 헤어 컷 관련 그래픽스 연구는 주로 힘 기반 피드백 위주의 연구이다. 본 논문에서 주장하는 가상환경에서 인터랙티브한 헤어 컷 작업에 대한 연구는 아직 이루어지고 있지 않다. 본 연구에서는 미용에 필요한 동작을 핑거 트래킹이 가능한 VR 컨트롤러에서 미용도구 선택, 자르기, 회전 등이 가능하도록 하였으며 비대면 협업 환경으로 구축하였다. 연구 결과로서, 정확한 헤어 절단 작업을 위해 소지걸이 애니메이션에 따른 핑거 트래킹과 가위의 움직임이 위치 보정에 따른 동기화 작업의 결과와 다중 사용자 기반의 가상 협업 환경에서의 실시간 인터랙티브 헤어 컷 작업을 실험하였다, 비대면 상황에서 헤어 스타일링에 필요한 커트동작에 관한 학습이 가능하게 되었으며 교수자와 학습자는 VR HMD 내장 마이크와 Photon Voice로 상호 간의 의사소통이 가능하게 되었다.

• 한국멀티미디어학회논문지
• /
• 제14권2호
• /
• pp.182-193
• /
• 2011

The aim of this paper is to present the methodology for hand tracking and hand gesture recognition. The detected hand and gesture can be used to implement the non-contact mouse. We had developed a MP3 player using this technology controlling the computer instead of mouse. In this algorithm, we first do a pre-processing to every frame which including lighting compensation and background filtration to reducing the adverse impact on correctness of hand tracking and hand gesture recognition. Secondly, YCbCr skin-color likelihood algorithm is used to detecting the hand area. Then, we used Continuously Adaptive Mean Shift (CAMSHIFT) algorithm to tracking hand. As the formula-based region of interest is square, the hand is closer to rectangular. We have improved the formula of the search window to get a much suitable search window for hand. And then, Support Vector Machines (SVM) algorithm is used for hand gesture recognition. For training the system, we collected 1500 hand gesture pictures of 5 hand gestures. Finally we have performed extensive experiment on a Windows XP system to evaluate the efficiency of the proposed scheme. The hand tracking correct rate is 96% and the hand gestures average correct rate is 95%.