• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.398-398
• /
• 2010

To determine the molecular directionality of PI chains depending on rubbing condition, we measured the angle resolved near edge X-ray absorption fine structure (NEXAFS) spectra at C K-edge of the rubbed PI films. Twisted nematic mode PI (PI-TN) and in plane switching mode PI (PI-IPS) were introduced to examine the effect of rubbing conditions on the chain directionality. The average tilt angle a of the PI molecules was estimated through the measured intensity change of $C=C\;{\pi}^*$ in NEXAFS C K-edge spectrum by controlling the stage speed and the pile contact depth. After rubbing, the irregular molecular direction changed to a regular direction with a molecular tilt angle of $51.2^{\circ}$ for PI-TN and $49.6^{\circ}$ for PI-IPS at the rubbing condition of the roll speed of 1000 rpm, stage speed of 50 mm/sec, and file contact depth of 0.3 mm. The molecular tilt angle $\alpha$ was linearly decreased in the PI-TN and PI-IPS samples with increasing depth of the pile contact.

• Tribology and Lubricants
• /
• 제38권3호
• /
• pp.73-83
• /
• 2022

This paper is concerned with an analysis of a surface edge crack emanated from a sharp contact edge. For a geometrical model, a square wedge is in contact with a half plane whose materials are identical, and a surface perpendicular crack initiated from the contact edge exists in the half plane. To analyze this crack problem, it is necessary to evaluate the stress field on the crack line which are induced by the contact tractions and pseudo-dislocations that simulate the crack, using the Bueckner principle. In this Part I, the stress filed in the half plane due to the contact is re-summarized using an asymptotic analysis method, which has been published before by the author. Further focus is given to the stress field in the half plane due to a pseudo-edge dislocation, which will provide a stress solution due to a crack (i.e. a continuous distribution of edge dislocations) later, using the Burgers vector. Essential result of the present work is the corrective functions which modify the stress field of an infinite domain to apply for the present one which has free surfaces, and thus the infiniteness is no longer preserved. Numerical methods and coordinate normalization are used, which was developed for an edge crack problem, using the Gauss-Jacobi integration formula. The convergence of the corrective functions are investigated here. Features of the corrective functions and their application to a crack problem will be given in Part II.

• Asia Marketing Journal
• /
• 제20권3호
• /
• pp.83-103
• /
• 2018

The purpose of this research is to investigate the effect of customer-contact employees support on service recovery efforts. Service companies should try to prevent the service failure situation from occurring, but it is realistic that the service failure occurs due to the characteristics of the service. Service recovery efforts of service providers are important because effective responses to service failures can enhance customer satisfaction despite service failures. Social support for customer-contact employees needs to improve service recovery efforts. Specifically, this study focuses on the mediation roles of job burnout and customer orientation in relationship between social support for customer-contact employees and service recovery efforts. Social exchange theory was used as the theoretical underpinning of the research model. Based on reciprocity principle, this paper suppose that support for customer-contact employees and service recovery effort are a kind of social exchange relationship. Social supports for customer-contact employees are categorized into internal and external organization. Internal organization is POS(perceived organizational support) and external organization is customer support. The research model was tested with the data gathered from the flight attendants whose emotional labor intensity was relatively high and the service failure frequently occurred. As a result of analysis, social supports for customer-contact employees classified into organizational support, supervisor support, and customer support are found to have differential impacts on job burnout and customer orientation. It has been found that job burnout of service providers is negatively affecting service recovery efforts. On the other hand, customer orientation of service providers has a positive influence on service recovery efforts. Based on the results of the analysis, we provide practical implications for effective service recovery efforts in service failure situations, and suggest the theoretical implications to explain the process of service recovery effort. Finally, limitations of the study and directions for future research are suggested.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.34-42
• /
• 1986

본 논문에서는 균열면이 원호(circular arc)를 이루고, Comninou 모델과 같이 균열면의 일부가 접촉되어 있는 경우 L적분이 적분경로에 무관함을 증명하고 이를 이용하여 재료가 서로 다른 원형 개재물과 기재와의 경계면에 존재하는 계면 균열에서의 응력확대계수를 구하는 방법에 대해 살펴보았다. 기지가 무한 고체이고 접촉역이 작아 접촉역의 존재가 균열선단에서 멀리 떨어진 곳에서의 응력장에 거의 영향을 끼치지 아`는 경우에는 접촉역을 가정하지 않은 문제에 대한 해, 즉 진동특성을 나타내는 해로 부터, L적분의 성질을 이용하여, 접촉역을 가정하였을 때의 응력확대 계수를 간단한 꼴로 표시할 수 있었고, 유한의 기지에 원형 개재물이 존재하는 문제에 대해서는 F.E.M을 사용하여 L적분을 계산함으로써 응력확대계수를 구할 수 있었다.

• Design & Manufacturing
• /
• 제10권1호
• /
• pp.19-25
• /
• 2016

Connectors are very important components that transmit electric signals to different parts. It must maintain intensity of the connector to prevent defects from impact and maintain contact to transmit electric signals. Most of the external parts of the connector, which act as the main framework, are formed by injection molding. However, bend deformation occurs for injection molded products due to the residual stress left inside the product after product molding. When the bend deformation is large, it does not come into complete contact when being assembled with other parts, which leads to connector contact intensity not being properly maintained. In result, the main role of the connector, which is to transmit electric signals, cannot be performed. In order to address this problem, this study conducted bend deformation cause analysis through bend deformation analysis to predict and prevent bend deformation of housings and wafers, which are injection molded products of pressure welded connectors that are normally applied in compact mobile and display products. Bend deformation analysis was carried out by checking the charging time, pressure distribution and temperature distribution through wire to board connector wafer and housing injection molding analysis. Based on the results of the bend deformation analysis results, the cause of the bend deformation was analyzed through deformation resulting from disproportional cooling, deformation resulting from disproportional contraction, and deformation resulting from ingredient orientation. In result, it was judged that the effects for bend deformation were biggest due to disproportional contraction for both the pressure welded connector wafer and housing.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.461-466
• /
• 2013

Synthetic fiber materials were developed due the desire of consumers for high-quality, high-performance and comfort. A high functionality of synthetic fiber can be obtained through surface treatment that can improve hydrophilic properties, color depth after dyeing and adhesion properties. These advantages create added-value. Hydrophobic properties are an important feature to create added-value (such as hydrophilic properties). One side processing is a method of imparting to contrary function on the front and rear side. In this study, fluorine-coated Nylon/PU blended fabric was treated on only one side with a low-temperature plasma treatment; subsequently, the contact angles decreased by increasing the time and intensity of the plasma treatment. The contact angle of the untreated surface and the treated surface was different. It a showed a difference in the properties of both surfaces. Tensile strength and stiffness decreased by increasing the time and intensity of the plasma treatment. However, plasma treatment did not significantly change the tensile strength and stiffness on both surfaces of the fabric. SEM photographs showed the surface of fluorine-coated fabric and the etching surface by using plasma treatment on the fabric. Plasma treatment was confirmed not to affect the physical properties of the fabric.

• 콘크리트학회지
• /
• 제10권4호
• /
• pp.145-151
• /
• 1998

본 연구에서는 콘크리트 덧씌구기 보수체 손상의 주원인은 보수 모르타르와 기층 콘크리트 접촉면에서 발생되는 연직 응력, y, 으로 가정한 후 강우시 보수체의 온도변화에 따라서 이 응력의 크기를 조사하였다. 이 연직응력은 강우강도,보수 모르타르의 두께 및 종류를 변수로 하여 유한요소법을 사용하여 계산되었다. 강우강도는 강우빈도 nR= 1/a, 지속시간 tR=10min 및 60min을 가진 경우를 택하였으며, 보수층 두께, do,는 1, 2, 4, 10 cm 그리고 사용된 모르타트는 시멘트 모르타르(CM), 에폭시 시켄크 모르타르(ECM), 에폭시 모르타르(EM)의 세종류이었다. 본 연구결과 강우시 보수체 접촉면의 연직 인장응력 y 를 추정할 수 있는 공식이 유도되었다. 이 식을 이용하여 강우시 보수체의 온도변화로 인해 발생할 수 있는 접촉면의 파괴를 예방할 수 있는 보수재료의 성질 및 보수층의 두께가 결정될 수 있다.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.320-326
• /
• 2019

Recently, the application of atmospheric plasma technology in air filtration is increasing. Sterilization by an atmospheric plasma device is very effective. However, ozone gas, which is generated during atmospheric plasma formation, poses a hazard to human health. To reduce the ozone gas during plasma discharge, we fabricated a one-plate hybrid plasma discharge device with a heating element, which can decompose ozone gas effectively by a simple heating action. In this study, we evaluated the plasma discharge characteristics and ozone concentrations with various Ar flow rates and temperatures. With increasing Ar gas flow rate, the ozone concentration and spectrum intensity increased till an Ar gas flow rate of 60 sccm, and decreased thereafter. When discharged in high temperature, the ozone concentration and spectrum intensity decreased. Further, to evaluate the state of the treated surface under various plasma discharge and heating conditions, we measured the variation in the contact angles on the surface. Regardless of the temperature, the contact angle increased with increasing discharge voltage. However, the contact angle increased when discharged at high temperature.

• Structural Engineering and Mechanics
• /
• 제20권4호
• /
• pp.451-463
• /
• 2005

Structural members commonly employed in marine and off-shore structures are usually fabricated from plates and shells. Collision of this class of structures is usually modeled as plate and shell structures subjected to dynamic impact loading. The understanding of the dynamic response and energy transmission of the structures subjected to low velocity impact is useful for the efficient design of this type of structures. The transmissions of transient energy flow and dynamic transient response of these structures under low velocity impact are presented in the paper. The structural intensity approach is adopted to study the elastic transient dynamic characteristics of the plate structures under low velocity impact. The nine-node degenerated shell elements are adopted to model both the target and impactor in the dynamic impact response analysis. The structural intensity streamline representation is introduced to interpret energy flow paths for transient dynamic response of the structures. Numerical results, including contact force and transient energy flow vectors as well as structural intensity stream lines, demonstrate the efficiency of the present approach and attenuating impact effects on this type of structures.

• 한국항공우주학회지
• /
• 제30권4호
• /
• pp.1-9
• /
• 2002

항공기 동체에 널리 사용되고 있는 기계적 체결은 응력집중 및 접촉압력 등으로 인해 체결부로부터의 균열발생 가능성이 상대적으로 높다. 본 연구에서는 가중함수법을 적용하여 기계적 체결부에 존재하는 경사진 타원형 모서리균열의 표면점과 최심점에서의 혼합모드 응력확대계수 해석을 수행하였다. 가중함수에 포함된 미정계수들은 기준하중에 대한 유한 요소해석으로부터 구하였다. 경사각에 따른 응력확대계수의 변화를 해석하여 모드 I 응력 확대계수가 최대가 되는 임계 경사각을 결정하였고, 간극의 크기와 균열깊이가 임계 경사각에 미치는 영향을 조사하였다.