• Corrosion Science and Technology
• /
• 제22권3호
• /
• pp.193-200
• /
• 2023

Titanium alloy (grade-4) is commonly used in industrial and medical applications. To improve its corrosion resistance and biocompatibility for medical use, it is necessary to form a titanium oxide film. In this study, the morphology of the oxide film formed by anodizing Ti-grade 4 using different electrolytes was analyzed. Wetting properties before and after surface modification with SAM coating were also observed. Electrolytes used were categorized as A, B, and C. Electrolyte A consisted of 0.3 M oxalic acid and ethylene glycol. Electrolyte B consisted of 0.1 M NH₄F and 0.1 M H₂O in ethylene glycol. Electrolyte C consisted of 0.07 M NH₄F and 1 M H₂O in ethylene glycol. Samples B and C exhibited a porous structure, while sample A formed a thickest oxide film with a droplet-like structure. AFM analysis and contact angle measurements showed that sample A with the highest roughness exhibited the best hydrophilicity. After surface modification with SAM coating, it displayed superior hydrophobicity. Despite having the thickest oxide film, sample A showed the lowest insulation resistance due to its irregular structure. On the other hand, sample C with a thick and regular porous oxide film demonstrated the highest insulation resistance.

• 한국융합학회논문지
• /
• 제9권8호
• /
• pp.117-125
• /
• 2018

본 연구에서는 각막굴절수술 후 콘택트렌즈 착용 실태, 유통 중인 콘택트렌즈의 베이스커브와 직경을 조사하여, 변형된 각막에 콘택트렌즈를 착용하였을 때 렌즈 움직임과 착용양상을 확인해보고자 하였다. 각막굴절수술 후 16.5%가 콘택트렌즈를 착용한 경험이 있었다. 또한, 콘택트렌즈의 베이스커브는 8.6 mm, 직경은 14.0 mm가 가장 많은 비중을 차지하였다. 각막굴절수술 한 24안의 각막은 편평하였으며, 콘택트렌즈를 착용했을 때 렌즈는 이측과 하측으로 모두 이동하였다. 각막굴절수술 후 콘택트렌즈 착용으로 불편함을 느낄 수 있어 렌즈 착용시 상세한 설명과 한정적인 렌즈의 종류로 정교한 피팅이 필요하며, 콘택트렌즈의 산업과 임상적인 연구에서 융합이 필요할 것이라고 생각된다.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.1-11
• /
• 2002

눈물 층을 사이에 두고 각막 위에 부착되어 있는 콘택트 렌즈(하드렌즈)에는 모세관 현상에 따른 장력이 렌즈 가장 자리에 균일하게 방사형으로 작용한다. 이러한 장력은 렌즈가 각막에 부착되는 힘의 근원이 된다. 렌즈착용 시 자체 무게에 의한 렌즈의 회전과 렌즈가 평형상태에 도달 한 후 각막에 부착되는 힘을 계산할 수 있는 방정식과 이의 수치 계산 컴퓨터 프로그램을 수립하였으며 이 컴퓨터 모델을 사용하여 렌즈 구경, 렌즈 B.C, 눈물의 점성, 눈물 층의 두께 등의 변수가 렌즈의 평형 위치 및 부착력에 미치는 영향을 모사(simulation)하였다. 일정 각막 B.C에서 렌즈 B.C 증가에 따라 눈물 충의 간격은 급격히 증가하는데 비해 렌즈의 직경 증가는 완만한 간격 증가를 수반한다. 렌즈의 B.C가 증가할수록, 즉 렌즈의 곡률이 완만할수록, 렌즈가 각막에 fitting되는 부착력은 급격하게 감소하며 직경 감소는 완만한 부착력 감소를 초래한다. 렌즈가 각막에 부착되는 순간 렌즈의 무게로 인하여 아래 방향으로의 회전 모멘트가 발생하게 되며 이와 동시에 렌즈 위 부분 눈물 층의 간격이 아래 부분보다 좁아지게 되어 위 방향으로 알짜 힘이 작용하게 되며 이에 따른 역방향 모멘트는 중력에 의한 모멘트를 상쇄하게 되어 렌즈는 일정 위치에서 평형 상태에 도달하게 된다. 렌즈 착용에 수반되는 초기 회전각 또는 회전 변위는 렌즈의 B.C가 증가할수록 급격히 증가하는데 비해 렌즈 구경 증가는 변위 증가율이 완만하다.

• 한국재료학회지
• /
• 제28권8호
• /
• pp.452-458
• /
• 2018

This research is conducted to create a functional hydrogel ophthalmic lens containing nanoparticles. Carbon nanoparticles and PEGMEMA are used as additives for the basic combination of HEMA, MA, and MMA, and the materials are copolymerized with EGDMA as the cross-linking agent and AIBN as the thermal initiator. The hydrogel lens is produced using a cast-mold method, and the materials are thermally polymerized at $100^{\circ}C$ for an hour. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before the optical and physical characteristics of the lens are measured. The refractive index, water content, contact angle, light transmittance, and tensile strength are measured to evaluate the physical and optical characteristics of the hydrogel lens. The refractive index, water content, contact angle, UV-B light transmittance, UV-A light transmittance, visible light transmittance, tensile strength and breaking strength of the hydrogel lens polymer are 1.4019~1.4281, 43.05~51.18 %, $31.95{\sim}68.61^{\circ}$, 21.69~58.11 %, 35.59~84.26 %, 45.85~88.06 %, 0.1075~0.1649 kgf and 0.1520~0.2250 kgf, respectively. The results demonstrate an increase in refractive index, tensile strength and breaking strength and a decrease in contact angle and light transmittance. Furthermore, the visible light transmissibility is significantly increased at PEG 10 %. It is clear that this material can be used for high-performance ophthalmic lenses with wettability, ultraviolet ray blocking effect, and tensile strength.

• Journal of Acupuncture Research
• /
• 제19권2호
• /
• pp.114-127
• /
• 2002

Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion objectively and to be used as the quantitative data for developing the new thermal stimulating treatment by observing the combustion time and temperature of commercial moxaes. Methods : We have selected two types(large-size moxa A(LMA), large-size moxa B (LMB)) among large moxaes used widely in the clinic. We examined combustion times, temperatures in each period during a combustion of moxa. Results : 1. The combustion time in the preheating period was about 30sec in both moxaes on the non-contact heated surface. 2. The combustion time in the heating period was about 345sec in LMA and about 1391 sec in LMB, about 4 times longer in LMB on the non-contact surface. 3. The maximum temperature in the heating period was $44.5^{\circ}C$ in LMA and $45.4^{\circ}C$ in LMB respectively, higher by $0.9^{\circ}C$ in LMB. The average temperature in the heating period was $35.5{\sim}37.6^{\circ}C$ in LMA and $36.0{\sim}39.8^{\circ}C$ in LMB, a little higher in LMB. 4. The combustion time in the retaining period in LMA was 45.4sec and 13% of that in the heating period, and in LMB 594.7sec and 43% of that in the heating period on the non-contact surface. 5. On the point(PH) measured maximum temperature, the average temperature during the retaining period was $44.0^{\circ}C$, $42.9^{\circ}C$ respectively and the temperature at an end of the retaining period was $43.0^{\circ}C$, $40.2^{\circ}C$ respectively. 6. The time at a beginning of the cooling period was about 418 sec from ignition in LMA and 2021sec in LMB, and the temperature at that time was $36.9{\sim}39.1^{\circ}C$ on the non-contact surface. Conclusion : It was thought that not only the figure of moxicombustion device, but also the form and size of moxa had influence on the combustion characteristics deciding the performance of stimulus seriously.

• Journal of Astronomy and Space Sciences
• /
• 제1권1호
• /
• pp.55-65
• /
• 1984

A total of 618 photoelectric observations (302 in yellow and 316 in bule) is made in 1982 at the Yonsei University Observatory. Except that of the secondary eclipse the homogeneous coverage of observations successfully secured B, V, and B-V light curves. Enhanced distortions in the light curves are appeared at the phases aroung $0.^P1$, which supports the wave-like migration period of 9.7 years(Rodono 1981). One epoch time of the primary minimum was made by combining the observations in three nights. This minimum time shows that the O-C values are still decreasing and there seems to indication of increasing. B and V light curves of the primary minimum are in strong asymmetry which show less luminous in the third and fourth contacts compared to those of the first and second ones. This asymmetry may be as a result of the reflection of the wave minimum at $0.^P1$, and B-V curve also shows asymmetry, redder at the third contact than the second one by about $0.^m04$. This color difference apperature distribution on the surface of cooler, larger component(KO IV star).

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.182-185
• /
• 2004

In this work, the effect of chemical treatments on surface properties of SiC was investigated in mechanical interfacial properties of carbon fibers-reinforced composites. The surface properties of the SiC were determined by acid/base values and contact angles. The thermal stabilities of carbon fibers-reinforced composites were investigated by thermogravimetric analysis (TGA). Also, the mechanical interfacial properties of the composites were studied in interlaminar shear strength (ILSS) and critical strain energy release rate mode II $(G_{IIC})$ measurements. As a result, tile acidically treated SiC (A-SiC) had higher acid value than that of untreated SiC (V-SiC) or basically treated SiC (B-SiC). According to the contact angle measurements, it was observed that chemical treatments led to an increase of surface free energy of the SiC surfaces, mainly due to the increase of the specific (polar) component. The mechanical interfacial properties of the composites, including ILSS and $(G_{IIC})$, had been improved in the specimens treated by chemical solutions. These results were explained that good wetting played an important role in improving the degree of adhesion at interfaces between SiC and epoxy resin matrix.

• ETRI Journal
• /
• 제25권6호
• /
• pp.510-516
• /
• 2003

In this paper, we describe the development of a platform-based SoC of a 32-bit smart card. The smart card uses a 32-bit microprocessor for high performance and two cryptographic processors for high security. It supports both contact and contactless interfaces, which comply with ISO/IEC 7816 and 14496 Type B. It has a Java Card OS to support multiple applications. We modeled smart card readers with a foreign language interface for efficient verification of the smart card SoC. The SoC was implemented using 0.25 ${\mu}m$ technology. To reduce the power consumption of the smart card SoC, we applied power optimization techniques, including clock gating. Experimental results show that the power consumption of the RSA and ECC cryptographic processors can be reduced by 32% and 62%, respectively, without increasing the area.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.792-797
• /
• 2007

This study investigates the change of the temperature and fatigue property of the braking disk (GC25-30 material) for the railway vehicle. The average temperature is measured about $100^{\circ}C$ and the maximum temperature is measured over $200^{\circ}C$ by non-contact sensor from Seoul to Chun-an. In the $20^{\circ}C-300^{\circ}C$. The Fatigue tests did for new and used disk specimens. The fatigue test results of new disk specimens were similar due to the temperature change. But the compare of specimens between new disk and old disk, The fatigue life of old disk specimens was smaller than new disk specimens about 10%.

• 디지털융복합연구
• /
• 제16권11호
• /
• pp.373-381
• /
• 2018

본 연구는 간호대학생의 다문화접촉경험과 문화적 공감이 다문화수용성에 미치는 영향을 확인하기 위하여 시도되었다. 연구 대상자는 C시의 3개 간호학과 학생 164명이었다. 자료수집은 2017년 11월 15일부터 12월 20일까지 하였다. 자료는 SPSS 23.0을 이용하여 빈도, t-test, one-way ANOVA, 피어슨 상관계수 분석, 다중회귀분석을 하였다. 연구결과 다문화수용성은 정서적 공감(r=.56, p<.001), 인지적 공감( r=.40, p<.001), 다문화접촉경험(r=.16, p=.040)과 양의 상관이 있었다. 다문화수용성에 영향을 주는 요인은 정서적 공감, 인지적 공감이었으며 이들의 설명력은 33.7% 로 나타났다(F=42.47, p<.001). 본 연구에서 정서적 공감과 인지적 공감은 다문화수용성에 양의 영향을 미치는 것으로 나타났다. 이러한 본 연구의 결과는 간호대학생의 다문화수용성 향상을 위한 새로운 전략개발에 도움이 될 것이다.