• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.96-96
• /
• 2010

To improve surface wettability, each sample was treated by atmospheric pressure plasma (APP) using dielectric barrier discharge (DBD) system. Argon and oxygen gases were used for treatment gas to modify the $TiO_2$ surface by APP with RF power range from 50 to 200 W. Water contact angle was decreased from $20^{\circ}$ to $10^{\circ}$ with argon only. However, water contact angle was decreased from $20^{\circ}$ to < $1^{\circ}$ with mixture of argon and oxygen. Water contact angle with $O_2$ plasma was lower than water contact angle with Ar plasma at the same RF power. It seems to be increasing the polar force of $TiO_2$ surface. Also, analysis result of X-ray photoelectron spectra (XPS) shows the increase of intensity of O1s shoulder peak, resulting in increasing of surface wettability by APP. Moreover, each water contact angle increased according to increase past time. However, contact angle increase with plasma treatment was lower than without plasma treatment. Additionally, the efficiency of $TiO_2$ photocatalyst was improved by plasma surface-treatment through the degradation experiment of phenol

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.11
• /
• pp.867-873
• /
• 2006

Vertical falling liquid film is extensively used in heat and mass transfer processes of many applications, such as evaporative coolers, cooling towers, and absorption chillers. In such cases, it is required that the falling film spreads widely in the surface forming thin liquid film to enlarge contact surface. An addition of surface active agent to a falling liquid film or hydrophilic surface treatment affects the fluid physical properties of the film. Surfactant addition not only decreases contact angle between the liquid and solid surface but also changes the surface from hydrophobicity to hydrophilicity. In this study, the effects of contact angle on falling film characteristics over a vertical surface have been investigated experimentally. The contact angle is varied either by an addition of surfactant to the liquid or by hydrophilic surface treatment. It is found that the wetted area is increased and film thickness is decreased by the hydrophilic treatment as compared with those of other surfaces. With this hydrophilic treatment, the falling liquid film spreads out widely in the surface. As surfactant concentration is increased, wetted area is also increased and the film thickness is substantially decreased.

• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1121-1129
• /
• 2024

Objective: Objective of the study was to reduce heat stress in Murrah buffaloes and maintain their milk production and other vital functions during heat stress. Methods: A total of 21 dyads of calf-mother Murrah buffalo were selected for the study and equally divided in 3 treatment groups. First treatment group was restricted calf contact (RCC), second treatment group was fence line calf contact (FCC) and third treatment groups fence line calf contact and heat stress protection (FCC-HSP [time-controlled fan-fogger system] in the shed). Present study was conducted from April to mid-September 2021. Results: Maximum temperature and temperature humidity index in FCC-HSP shed were significantly (p<0.05) lower than that in FCC and RCC shed. Higher (p<0.05) mean daily milk yield in both the treatment groups FCC (10.36±0.30) and FCC-HSP (10.97±0.31) than RCC (8.29±0.41) was recorded. Though no significant difference between FCC and FCC-HSP in daily milk yield but FCC-HSP yielded 600 gm more milk than FCC. Pulse rate (PR) and respiration rate (RR) were lowest in FCC-HSP followed by FCC and RCC, respectively. Cortisol and prolactin levels were lower (p<0.05) in FCC-HSP followed by FCC and RCC, respectively. Conclusion: Hence, FCC along with heat stress ameliorative measures helped the buffaloes to be free of stress and maintain milk yield during heat stress period of the year in tropical conditions.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.10a
• /
• pp.207-212
• /
• 1996

The shotpeening treatment were conducted for improving the strength of rolling contact fatigue of machine element like a gear. This paper was undertaken to analyze the influence of shotpeening treatment for inner race of ball bearing on the roiling contact fatigue. Shotpeening treatment were applied to the full hardened and the carbonitrided bearing. And the rolling contact fatigue life test and X-ray diffraction test were carried out. The results of this study showed that the fatigue life of ball bearing in the clean and the contaminated oil could be improved by shotpeening treatment. This effect was found to be more pronounced to the full hardened bearing.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.136-143
• /
• 1995

With the contact angle of phase dropping epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interfacial wettability between epoxy resin and glass plate as a simple model of glass fiber reinforced composite materials. The contact angle on the inorganic filler surface varied with surface treatment conditions. The contact angle significantly depends on plasma treating time and environment temperature in the oven. From the view point of plasma treatment condition in this work, when discharge conditions were pressure 200mtorr, voltage 800V, magnetic flux density 8OGauss, optimum treatment time were proved as 3,4 and 5 minutes for the environment of >$80^{\circ}C$, >$100^{\circ}C$ and >$120^{\circ}C$, respectively.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.71-74
• /
• 2000

In this study, the optimal condition of surface treatment for aluminum panel was determined by measuring the contact angle and T-peel strength. The contact angle was measured for various mixture ratios of acetylene gas and nitrogen gas. The mixture (acetylene gas to nitrogen gas) ratios used were 1:9, 3:7, 5:5, 7:3, and 9:1. The contact angle was also measured as a function of time of surface treatment. The results showed that the contact angle was a minimum for mixture ratio of 5:5. T-peel strength was a maximum for the treatment time of 30 second.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.30 no.2
• /
• pp.82-86
• /
• 2019

In the field of otolaryngology-head and neck surgery, botulinum toxins are widely used for the treatment of spasmodic dysphonia and vocal tremors. Recently, the applications of botulinum toxin have gradually expanded with time, to include vocal fold granuloma, mutational falsetto, bilateral vocal cord paralysis, and chemical reduction for arytenoid dislocation as an adjunctive modality. According to a nation-wide multicenter study conducted by the Korean Society of Laryngology, Phoniatrics and Logopedics for treatment modality of contact granuloma, among the various treatment modalities, botulinum toxin injection showed the highest response rate and lowest recurrence rate in both primary and refractory cases. Therefore, botulinum toxin could be reserved as a second-line treatment for contact granuloma in which the first treatment was not effective, but also could be used as a first-line treatment depending on the patient's and institution's situation. For recalcitrant nodules, injection of botulinum toxin into the bilateral thyroarytenoid muscle will reduce glottal contact force and result in a forceful chemical voice rest. In special situations, botulinum toxin injection could be one of the alternative treatment options for recalcitrant vocal nodules.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.28 no.2
• /
• pp.123-127
• /
• 2017

Background and Objectives : Contact granuloma is granulation tissue that occurs mainly in the vocal process of arytenoid cartilage. Among several etiological factors, gastric acid reflux is known to be an important cause. The aim of this study was to evaluate clinical characteristics of contact granuloma and analyze the effectiveness of proton pump inhibitor in the treatment of contact granuloma. Materials and Methods : We retrospectively reviewed the medical records of 40 patients who were treated with proton pump inhibitor (PPI) for contact granuloma from January 2011 to December 2015. Reflux finding score (RFS), reflux symptom index (RSI) and size of granuloma were evaluated before and after treatment serially to assess the effectiveness of proton pump inhibitor. Results : Of 40 patients, 25 patients (62.5%) and 10 patients (25%) showed improvement and partial improvement of granuloma, respectively. Five patients showed no response. The mean times of partial improvement and improvement were $2.08{\pm}2.23$ months and $4.60{\pm}2.77$ months, respectively and mean duration of PPI treatment was $6.8{\pm}5.2$ months. Conclusion : Proton pump inhibitors is effective in the treatment of contact granuloma.

• Journal of Oral Medicine and Pain
• /
• v.32 no.1
• /
• pp.105-111
• /
• 2007

Correlation between occlusal contact pattern and TMD have been hypothesized and partially investigated but results are controversial and not conclusive. The purposes of this study were to compare right-to-left difference of occlusal contact pattern, through contact points, contact force and occlusal balance, in the patients with unilateral TMD and also to evaluate its change related with TMD treatment. 36 patients with unilateral TMD from Department of Oral Medicine in Dankook University Dental Hospital were selected in this study (M:F=7:29, mean age of $29.2{\pm}14.8$ years). A computerized T-Scan II system (Tekscan, INC., USA) was employed for occlusal analysis and the simultaneity and occlusal balance through the number of tooth contact and magnitude of contact force were determined before and after TMD treatment. The number of contact points and contact force was more on the unaffected side than the affected side before treatment (p=0.056 and p=0.060, respectively) while significant difference between both sides was not found after treatment. The number of contact points and contact force on the affected sides significantly increased after treatment (p=0.038 and p=0.052), but the unaffected sides exhibited no significant difference between before and after treatment. In addition, sides difference in relative contact force decreased from about 27% to about 12% after TMD treatment (p=0.001). According to the results of this study, it is likely that unilateral TMD impairs right-to-left occlusal balance and that conservative TMD treatment alleviates the imbalance, subsequently leading to more symmetrical occlusal condition with increased contact points and force.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.29 no.4
• /
• pp.169-181
• /
• 2016

Objectives : The purpose of this case report is to know the effect of Korean medical treatments on occupational contact dermatitis. Methods : We reported 2 cases who visited Allergy and Derma-Cosmetic Clinic of Kyung Hee University Hospital at Gangdong. They were diagnosed with occupational contact dermatitis and treated by Korean medical treatment. Results : One patient recovered after 13 days of admission and total 9 months of outpatient period. Another patient recovered after 9 days of admission and total 7 months of outpatients period through Korean Medical Treatment. Conclusions : We may expect that Korean medical treatment had therapeutic effects on occupational contact dermatitis, but the additional study will be conducted for revealing the exact therapeutic effects.