• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.4
• /
• pp.153-160
• /
• 2001

In order to analyze the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to high temperature. Then, the degradation process was evaluated by comparing contact angle, surface potential, surface resistivity, and XPS. The experimental results showed that the amount of weight loss, contact angle, surface potential and surface resistivity increased up to 200 $^{\circ}C$ as a function of temperature. These phenomena show the existence of hydrophobic surface. With the change to the hydrophobic surface and the electrical potential and resistivity on FRP surface increased. In XPS to analyze surface chemical structures, the increased hydrophobicity in thermal increase of unsaturated double bond in carbon chains. Aslo, thermal treatment caused the discoloration on the point of treated surface. These phenomena were attributed to the generations of ether group.

• Journal of Oral Medicine and Pain
• /
• v.33 no.3
• /
• pp.279-294
• /
• 2008

This study aimed to make an analysis of the occlusion in the state of muscle fatigue produced by excessive mouth opening and clenching during the dental treatment to control the dental pain and to evaluate the sensory nerve in the muscle pain state. Most of the reasons why patients visit the dental office result in pain-either conceivably the dental origin pain or the non-dental origin pain. The dental offices have many therapeutic actions to produce the masticatory muscle fatigue for the treatment. Dental treatment with long minutes of mouth opening can cause some headaches, masticatory muscle pain and mouth opening difficulties. Patients with mastication problems who visits a dental office to alleviate pain run against another unexpected pain with other aspects. This study uses T-scan II system(Tekscan Co., USA) for the evaluation on the occlusal pattern in the experimental muscle fatigue after clenching, opening the mouth excessively and chewing gum. The occlusal contact pattern is analyzed by the contact timing, namely first, intercuspal, maximum and end point of contact. This inspection was performed at frequencies of 2000Hz, 250 Hz and 5 Hz before and after each experimental muscle pain was produced to 24 subjects who had normal occlusion without the orthodontic treatment or a wide range of the prosthesis by using $neurometer^{\circledR}$ CPT/C(Neurotron, Inc. Baltimore, Maryland, USA). The measuring sites were mandibular nerve experimental muscle fatigue respectively. This study could obtain the following results after the assessment of occlusion and sensory nerve of the experimental muscle fatigue. 1. There were the fastest expression after the excessive mouth opening in muscle fatigue and after tooth clenching in muscle pain. In the visual analog scale that records the subjective level, there was the highest scale after the clenching in the muscle fatigue in jumping off the point of pain. 2. Tooth contact time, contact force, relative contact force on the point of the first contact had no difference, and there were decreases in the contact force after the excessive mouth opening on intercuspal position point, after the excessive mouth opening and the gum chewing on the point of the maximum, and in the contact time after all the experimental muscle fatigue state on the point of the end contact. 3. There was no statistic significance in the current perception threshold before and after the experimental muscle fatigue. 4. There was no significant difference in the contact number, the maximal contact number on the point of the first contact, and the contact number after the mouth opening and gum chewing on the point of the intercuspal position and the contact number after the experimental muscle fatigue on the maximum point, and showed significant decreases. In conclusion, it was found that the occlusal pattern can cause the changes on the case of the clinical muscle weakness by intra-external oral events. It was important that the sedulous attention to details is required during dental treatment in case of excessive mouth opening, mastication and clenching.

• Journal of Environmental Science International
• /
• v.13 no.4
• /
• pp.403-412
• /
• 2004

Waste water-soluble cutting oil was treated with WI type #1 and WI type #2. The properties of the original water-soluble cutting oil were pH=l0.4, viscosity=1.4cP, CODcr=44,750 ppm, and TOC=10,569 ppm. However, the properties of the oil used for more than 3 months were changed to pH=7.82, viscosity=2.1cP, CODcr=151,000 ppm, and TOC=74,556 ppm. It might be attributed to the fact that molecular chains were cut due to thermal oxidation and impurities such as metal chips were incorporated in to the oil during the operation processes. To prevent the putrefaction of oil, the sterilization effect of ozone and UV on the microorganism in the oil was investigated. Ozone treatment showed that 99.99% of the microorganism was annihilated with 30 minutes contact time and 60 minutes were necessary for the same effect when UV was used. Ozone treatment could cut molecular chains of the oil due to strong sterilization power, which was evidenced by the increase of TOC from 25,132 ppm at instantaneous contact to 28,888 ppm at 30 minutes contact time. However, UV treatment didn't show severe changes in TOC values and thus, seemed to cause of severe cut of molecular chains. When the activated carbon was used to treat the waste water-soluble cutting oil, TOC decreased to 25,417 ppm with 0.lg carbon and to 15,946 ppm with 5.0g carbon. This results indicated that the waste oil of small molecular chains could be eliminated by adsorption. From the results, it could be concluded that these treatment techniques could be proposed to remove the waste oil of small molecular chains resulting in the degradation of the oil properties. In addition, these experimental results could be used for the correlation with future works such as investigation of the molecular distribution according to the sizes, lengths, and molecular weight of the chains.

• Composites Research
• /
• v.25 no.3
• /
• pp.76-81
• /
• 2012

Atmospheric pressure plasma treatment on carbon nanotube (CNT) surfaces was performed to modify reinforcement effect and interfacial adhesion of carbon fiber reinforced CNT-phenolic composites. The surface changes occurring on CNT treated with plasma were analyzed by using Fourier transform infrared spectroscope (FT-IR). The significant improvement of wettability on CNT was confirmed by static contact angle test after plasma treatment. Such plasma treatment resulted in a decrease in the advancing contact angle from $118^{\circ}$ to $60^{\circ}$. The interfacial adhesion between carbon fiber and CNT-phenolic composites increased by plasma treatment based on apparent modulus test results during quasi-static tensile strength. Furthermore, the proposed database offers valuable knowledge for evaluating interfacial shear strength (IFSS).

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.1
• /
• pp.71-80
• /
• 2023

Silver paste is a valuable electrode material for electronic device applications because it is easy to handle with relatively low heat treatment. This study treated the electrode surface using an atmospheric-pressure plasma jet on the silver-paste electrode. This plasma jet was generated in an argon atmosphere using a high voltage of 5.5 to 6.5 kV with an operating frequency of 11.5 kHz. Plasma-jet may be more beneficial to the printing process by performing it at atmospheric pressure. The electrode surface becomes hydrophilic quickly and contact angle variation is observed on the electrode surface as a function of plasma treatment time, applied voltage, and gas flow rate. Also, there was no deviation in the contact angle after the plasma treatment in the large-area sample, that means a uniform result could be obtained regardless of the substrate size. The outcomes of this study are expected to be very useful in forming a stacked structure in the manufacture of large-area electronic devices and future applications.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.3
• /
• pp.623-628
• /
• 2006

Sopung-san(SPS; prescription No. DO27), a herbal medicine prescribed by oriental hospital of Daegu fanny University, has been used as cure for pruritus and psoriasis. To evaluate anti-inflammatory effect of Sopung-san, we treated Sopung-san extract in animal model system induced contact hypersensitivity. Contact hypersensitivity, a local inflammatory response of the skin, was induced by 1% DNCB on the right ear of BALB/C mouse. Sopung-san was prepared as water extract and administrated everyday for 2 weeks per oral. A right ear of mouse was potently swelled by 1% of DNCB treatment, but a mouse ear thickness was significantly reduced by Sopung-san after 2 weeks. treatment. Sopung-san reduced IgG in serum obtained from blood of 1 % DNCB-treated mouse. IgE in serum was not changed by DNCB and/or Sopung-san treatment. $IL-1{\beta}$ and IL-6 from ear tissue were significantly increased by DNCB, Dut were not reduced by Sopung-san. From these results, anti-inflammatory effect of Sopung-san, especially reduction of ear swelling, might be partly due to reduction of IgG in serum.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.31 no.1
• /
• pp.27-30
• /
• 2020

Among lesions in the larynx, laryngeal contact granuloma due to persistent tissue irritation can typically be attributed to endotracheal intubation, vocal abuse, or gastro-esophageal reflux disease. Treatment typically includes voice therapy, lifestyle changes and use of anti-reflux medication. Microsurgical removal is only indicated in cases of severe dyspnea due to mass size. Foreign body granuloma is a response of to any foreign material in the tissue. Foreign body granulomas are sometimes misdiagnosed as soft tissue tumors when the causative foreign body is not initially found. Delayed treatment of these foreign bodies may cause complications. We present a case of larynx granuloma due to impacted foreign body, probably fish bone, in the larynx that mimicked contact granuloma. We initially used anti-reflux medication, but to no avail. The laryngeal mass, observed through laryngoscopy, showed no improvement and therefore necessitated a proper pathologic diagnosis. We were able to successfully treat it via trans-oral laser CO2 microsurgery before any complications developed.

• Korean Journal of Bronchoesophagology
• /
• v.7 no.1
• /
• pp.19-23
• /
• 2001

Background and Objectives： Larynx granuloma is a exophytic inflammatory mass and may result from gastroesophageal reflux disease and a traumatic or prolonged endotracheal intubation. There has been a controversy in the treatment of larynx granuloma. Our aim of study is to know the results of the conservative management and surgery for larynx granuloma. Materials and Methods : We have reviewed and analyzed medical records of 71 Patients who were diagnosed and treated as larynx granuloma in Asan medical center from 1989 to 2000 retrospectively. And questionnaires on present patient's status were answered via telephone. Results : Forty four cases were treated by conservative management and 29 cases were treated by surgery. The total Percentages of improvement after treatment were 85.7 o/o after conservative management and 75.9% after surgery. In intubation granuloma percentages of improvement were 86.4% after conservative management and 73% after surgery. In contact granuloma percentages of improvement were 85% after conservative management and 78.5% after surgery. Conclusion : Resolution and treatment periods are longer in contact granuloma compared to intubation granuloma in the groups of conservative management. (P＜0.05) There is no significant difference of their outcome between conservative management and surgery. (P＞0.05) Although this study is retrospective, conservative management is the first treatment in the management of larynx granuloma.

• The Journal of Internal Korean Medicine
• /
• v.36 no.1
• /
• pp.49-57
• /
• 2015

Objectives : The purpose of this report is to investigate the effect of Taeeumin Cheonghyeolgangki-tang on chronic contact dermatitis caused by cement. Methods : A 52-year-old male patient was diagnosed with contact dermatitis with the Questionnaire for Sasang Constitutional Classification-II (QSCC-II) as well as the four methods of diagnosis (四診), and treated with Taeeumin Cheonghyeolgangki-tang (qīngxuèjiàngqí-tāng). We observed redness and scaling on both palms, and recorded photographs of any changes during the inpatient and outpatient treatment period. Results : The symptoms of contact dermatitis on both palms were significantly improved. Scaling and cracked skin disappeared and the redness almost resolved. Conclusions : Therefore, Taeeumin Cheonghyeolgangki-tang ( qīngxuèjiàngqí-tāng ) is effective on chronic contact dermatitis caused by cement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.234-239
• /
• 2007

This paper describes the TiW ohmic contact characteristics under the surface treatment of the polycrystalline 3C-SiC thin film grown on $SiO_2/Si(100)$ wafers by APCVD. The poly 3C-SiC surface was polished by using CMP(chemical mechanical polishing) process and then oxidized by wet-oxidation process, and finally removed SiC oxide layers. A TiW thin film as a metalization process was deposited on the surface treated poly 3C-SiC layer and was annealed through a RTA(rapid thermal annealing) process. TiW/poly 3C-SiC was investigated to get mechanical, physical, and electrical characteristics using SEM, XRD, XPS, AFM, optical microscope, I-V characteristic, and four-point probe, respectively. Contact resistivity of the surface treated 3C-SiC was measured as the lowest $1.2{\times}10^{-5}{\Omega}cm^2$ at $900^{\circ}C$ for 45 sec. Therefore, the surface treatments of poly 3C-SiC are necessary to get better contact resistance for extreme environment MEMS applications.