• 제목/요약/키워드: Contact Joint

검색결과 548건 처리시간 0.023초

중공비율에 따른 중공 프리캐스트 철근콘크리트 기둥의 압축거동 (Compressive Behavior of Precast Concrete Column with Hollow Corresponding to Hollow Ratio)

  • 이승준;서수연;배문용;김강수
    • 콘크리트학회논문집
    • /
    • 제26권4호
    • /
    • pp.441-448
    • /
    • 2014
  • 최근 일련의 연구로부터, 중공이 있는 프리캐스트 콘크리트(hollewed precast concrete, HPC) 기둥를 사용할 경우, 일반적인 PC기둥에 비하여 접합부 콘크리트를 충실하게 채울수 있으며 이에 따라, 접합부의 고정도는 일체식 철근콘크리트(RC)와 같이 향상될 수 있음이 확인되었다. 그러나 충전콘크리트로 중공부가 채워진 후, HPC부재와 충전콘크리트의 강도가 서로 다르고 이 두 부재 사이에는 접촉면이 있음에 따라 합성구조와 같은 거동을 보이게 되며 이는 합성된 기둥의 구조적 거동과 강도에 영향을 미치게 된다. 이 논문에서는 HPC 기둥에서 중공의 크기와 중공부분 콘크리트의 채움 유무에 따른 기둥의 압축강도 시험을 실시하였다. 중공의 비율은 35, 50 그리고 59%이며 실험체의 양단을 단순지지 형태로서 지지한 뒤 중심압축력을 기둥의 상단에 작용시켰다. 또한 압축에 대한 HPC 기둥의 파괴거동을 묘사하기 위하여 유한요소 해석을 실시하였다. 실험 결과, 중공내부가 충전콘크리트로 채워진 기둥에서, PC와 충전콘크리트의 강도차이와 상관없이 중공률은 기둥의 초기강성에 영향을 미치지 않는 것으로 나타났다. 그러나 기둥의 압축강도는 중공률에 반비례하는 것으로 나타났다. 충전콘크리트가 채워지지 않은 HPC기둥의 구조성능은 중공의 직경에 밀접하게 관련이 있는 것으로 나타났으며, 특히, HPC의 두께가 지나치게 얇은 경우에는 국부적인 파괴가 전체 파괴를 지배하는 것으로 나타났다. 이러한 영향을 고려하여 HPC기둥의 압축내력을 산정할 수 있는 식을 제시하였다. 유한요소해석에서는, HPC와 충전콘크리트 사이의 접촉면을 고려할 경우, 해석 결과가 실험 결과와 좋은 대응을 보이는 것으로 나타났다.

Ovality가 세그먼트 라이닝의 동적 거동 특성에 미치는 영향 (The effect of tunnel ovality on the dynamic behavior of segment lining)

  • 이경주;송기일
    • 한국터널지하공간학회 논문집
    • /
    • 제25권6호
    • /
    • pp.423-446
    • /
    • 2023
  • 쉴드 TBM 터널 라이닝은 세그먼트와 링으로 분절되어 있다. 2-링 빔-스프링 모델은 세그먼트 라이닝의 링과 세그먼트의 연결부 경계조건을 통해 불연속성을 고려하며 단면 설계 시 주로 활용하는 모델링 방법이다. 그러나 3차원 해석이 필요한 경우 대체로 Segmentation에 대한 고려 없이 연속체 라이닝으로 간주하여 세그먼트 라이닝에 대한 응력과 변위를 검토하는 경향이 일반적이다. 본 연구는 세그먼트와 링의 접촉면에 Coulomb의 마찰 법칙에 근거한 Shell interface element를 적용하여 세그먼트 간 계면 거동하는 모델링으로 지진 시 세그먼트 라이닝의 응력과 변위에 대한 응답 특성을 연구한다. 세그먼트 라이닝은 건설 과정에서 Ovaling 변형이 발생된다. 국내 세그먼트 라이닝의 Ovaling 변형에 대한 관리 기준은 없다. 스웨덴이나 중국의 경우 내경 7.0 m의 라이닝인 경우 5~10‰의 Ovality 기준을 갖고 있으나 이는 현실적으로 실현하기 어려운 기준치이다. 본 연구는 Shell interface element를 활용한 세그먼트 라이닝 모델링을 통해 지진 시 라이닝에 발생되는 응력과 변위의 특성을 연속체 모델링 결과와 비교하여 Segmentation이 고려된 라이닝의 지진에 대한 응답 특성을 연구하고 이를 통해 세그먼트 라이닝의 Ovality 기준과 의미를 연구한다. 연속체 라이닝과 세그먼트 라이닝의 지진 시 응력과 변위의 분포 양상은 유사하였다. 그러나 응력과 변위의 최댓값은 세그먼트 라이닝과 차이를 보여주었다. Shell로 모델링 된 연속체 라이닝의 지진 시 응력 분포는 3차원 원통형 형상에 연속성을 갖는 응력 분포를 보이지만 세그먼트 라이닝은 분절된 세그먼트 외측으로 응력이 집중되었고 세그먼트와 링의 접촉면이 집중되는 위치에서 가장 큰 응력이 발생되었다. 이러한 단속적이고 국부적 응력 분포는 라이닝의 Ovality가 클수록 지진 시 더욱더 국부적 집중도가 커진다. 응력 분포가 급격하게 커지는 Ovality는 150‰ 정도에서 발생되기 시작했으며 그보다 작은 Ovality 에서는 원형 단면 라이닝에서 발생되는 응력보다 작은 응력이 발생되었다. 그러나 Ovality 150‰는 실제 라이닝에서 실현될 수 없는 비현실적 값이다. 따라서 세그먼트 라이닝의 Ovality는 심도에 따라 증가될 수 있으나 지진 하중에 대한 안정성에는 큰 영향을 미치지 않는다. 그러나 터널의 단면 확보 및 품질관리를 위해서는 Ovality에 대한 계측과 관리가 요구된다.

지대주의 반복적인 착탈에 따른 임플랜트 고정체의 external hexagon과 지대주 internal hexagon의 변화에 관한 연구 (SURFACE CHANCE OF EXTERNAL HEXAGON OF IMPLANT FIXTURE AND INTERNAL HEXAGON OF ABUTMENT AFTER REPEATED DELIVERY AND REMOVAL OF ABUTMENT)

  • 정석원;김희중;정재헌
    • 대한치과보철학회지
    • /
    • 제43권4호
    • /
    • pp.528-543
    • /
    • 2005
  • Statement of problem: Repeated delivery and removal of abutment cause some changes such as wear, scratch or defect of hexagonal structure. It may increase the value of rotational freedom(RF) between hexagonal structures. Purpose: The purpose of this study was to evaluate surface changes and rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment after repeated delivery and removal under SEM and toolmaker's microscope. Materials and methods: Implant systems used for this study were 3i and Avana. Seven pail's of implant fixture, abutment and abutment screws for each system were selected and all fixtures were perpendicularly mounted in liquid unsaturated polyesther with dental surveyor. Each one was embedded beneath the platform of fixture. Surfaces of hexagonal structure before repeated closing and opening of abutment were observed using SEM and rotational freedom was measured by using toolmaker's microscope. Each abutment was secured to the implant future by each abutment screw with recommended torque value using a digital torque controller and was repeatedly delivered and removed by 20 times respectively. After experiment, evaluation for the change of hexagonal structures and measurement of rotational freedom were performed. Result : The results were as follows; 1. Wear of contact area between implant fixture and abutment was considerable in both 3i and Avana system. Scratches and defects were frequently observed at the line-angle of hexagonal structures of implant fixture and abutment. 2. In the SEM view of the external hexagon of implant fixture, the point-angle areas at the corner edge of hexagon were severely worn out in both systems. It was more notable in the case of 3i systems than in that of Avana systems. 3. In the SEM view of the internal hexagon of abutment, Gingi-Hue abutment of 3i systems showed severe wear in micro-stop contacts that were machined into the corners to prevent rotation and cemented abutment of Avana systems showed wear in both surface area adjacent to the corner mating with external hexagon of implant fixture. 4 The mean values of rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment were 0.48$\pm$0.04$^{\circ}$ in pre-tested 3i systems and 1.18$\pm$0.25$^{\circ}$ after test, and 1.80$\pm$0.04$^{\circ}$ in pre-tested Avana systems and 2.61$\pm$0.16$^{\circ}$ after test. 5. Changes of rotational freedom after test shouted statistical)y a significant increase in both 3i and Avana systems(P<0.05, paired t-test). 6. Statistically, there was no significant difference between amount of increase in the rotational freedom of 3i systems and amount of increase in that of Avana ones(P>0.05, unpaired t-test). Conclusion: Conclusively, it was considered that repeated delivery and remove of abutment by 20 times would not have influence on screw joint stability. However, it caused statistically the significant change of rotational freedom in tested systems. Therefore, it is suggested that repeated delivery and remove of abutment should be minimal as possible as it could be and be done carefully Additionally, it is suggested that the means or treatment to prevent the wear of mating components should be devised.

만성통증 환자의 통증 조절 (Chronic pain control in patients with rheumatoid arthritis)

  • 은영
    • 근관절건강학회지
    • /
    • 제2권1호
    • /
    • pp.17-40
    • /
    • 1995
  • Rheumatoid arthritis is the one of the chronic diseases, one of its major symptoms is a chronic pain. Despite developing medical treatment and surgical techniques, it is suggested that to control the pain is the goal of the treatment. But pain is an inner experience and even those closest to the patient cannot truly observe its progress or share in its suffering. The National Academy of Sciences Institute of Medicine's report on Pain and Disability concluded that there is no objective measure of pain-(exactly) no pain thermometer-nor can there ever be one, because the experience of pain is inseparable from personal perception and social influence such as culture. To explore chronic pain experience is to understand the process and property of the patient's perception of pain through the response to pain, the coping with pain, and the adaptation to pain. Therefore a qualitative study was conducted in order to gain an understanding of pain experience of patients with RA in korea. I used naturalistic inquiry as a research methodology, which had 5 axioms, the first is that realities are multiple, constructed, and holistic, the second is that knower and known are interactive, inseparable, the third is only time and context bound working hypotheses(idiographic statements) are possible, the forth is all entities are in a state of mutual simultaneous shaping, so that it is impossible to distinguish causes from effects and the last is that inquiry is value-bound. Purposive sampling was conducted as a sampling. 20 subjects who experienced pain over 10 years, lived in middle-sized city and big city in Korea, and 17 women and 3 men. The subject's age was from 32 to 62 (average 48.8), all were married, living with their spouse and children, except two-one divorced and the other widow before they became ill. I collected data using In depth structured interview. I had interviews two or three times with each subject, and the interviews were conducted at each subject's home. Each interview lasted about two hours an average. A recording was taken with the consent of the subject. I used inductive data analysis-such as unitizing and categorizing. unitizing is a process of coding, whereby raw data are systematically transformed and aggregated into units. Categorizing is a process wherby previously unitized data are organized into categories that provide descriptive or inferential information about the context or setting from which the units were derived. This process is used constant comparative method. The pain controlling process is composed of behavior of pain control. The behaviors of pain control are rearranging of ADL, hiddening role conflict, balancing treatment, and changing social relation. Rearranging of ADL includes diet management, sleep management, and the adjustment of daily life activities. The subjects try to rearrange their daily activities by modified style of motions, rearranging time span & range of activities, using auxillary facilities, and getting help in order to keep on the pace of daily life. Hiddening role conflict means to reduce conflicts between sick role and their role as a family member. In this process, the subjects use two modes, one is to control the pain complaints, and the other is to internalize the value which is to stay home is good for caring her children and being a good mother. To control pain complaints is done by 'enduring', 'understanding' the other family members, or making them undersood in order to reduce pain. Balancing treatment is composed of two aspects. One is to keep the pain within the endurable level, the other is to keep in touch with medical personnel in order to get the information of treatment and emotional support. Changing social relation is made by information seeking and sharing, formation of mutual support relation, and finally simplification of social relationships. The subjects simplify their social relationships by refraining from relations with someone who makes them physically and psychologically strained. In particular the subjects are apt to avoid contact with in-laws, and the change of relation to in-laws results in lessening the family boundary. In the course of this process, they confront the crisis of family confict result in family dissolution. This crisis is related to the threat of self-existence. Findings from this study contribute to understanding the chronic pain experience. To advance this study, we should compare this result with other cases in different cultural contexts. I think to interpret these results, korean cultural background should be considered. Especially the different family concept, more broader family members and kinship network, and the traditional medical knowledge influences patients' behavior.

  • PDF

한국안광학회지 게재논문의 연구동향 분석 (Research Trends Analysis of Published Papers in the Journal of Korean Ophthalmic Optics Society)

  • 정세훈;박희경;이옥진
    • 한국안광학회지
    • /
    • 제20권2호
    • /
    • pp.93-104
    • /
    • 2015
  • 목적: 한국안광학회지에 게재된 논문을 대상으로 안경광학의 연구동향을 분석하여 향후 연구를 위한 기초자료로 활용하고자 하였다. 방법: 창간호부터 2014년까지 한국안광학회지에 게재된 990편의 논문을 대상으로 일반적 특성과 연구자 특성, 연구 특성, 연구동향을 통계분석 하였다. 결과: 게재논문의 저자 수는 2인과 3인이 각각 26.8%로 가장 많았다. 주 저자 소속지역은 전라지역이 31.3%로 가장 많았고 소속대학의 학제는 4년제가 43.0%로 가장 많았다. 연구방법은 검사가 40.9%로 가장 많았으며 연구주제는 검안학분야가 29.8%로 가장 많았다. 저자 수에 따라 주저자 소속대학의 학제, 연구방법에서 유의한 차이가 나타났다(p=0.000). 주 저자 소속대학의 학제에 따라 연구방법에서 유의한 차이가 나타났다(p=0.000). 연구주제에 따라 주 저자 소속대학 학제, 연구방법(p=0.000)에서 유의한 차이가 나타났다. 기간구분(1996~2004, 2005~2014)에 따라 유의한 차이가 나타났는데 저자 수는 증가하였으며, 4년제 대학교 소속 저자가 많아졌다(p=0.000). 검안학과 콘택트렌즈분야의 논문이 증가하였고 연구비수혜도 증가하였다(p<0.005). 또한 서울, 충청지역의 주 저자가 증가하였다(p=0.000). 결론: 안경광학 학문의 발전을 위해서 연구자의 층을 넓히고 다양한 연구주제를 다루어야 하며 안경업계와 학계의 공동노력, 해외협력이 필요하다.

유리제 등 조리기구 중 중금속 이행에 관한 연구 (A Study on Migration of Heavy Metals from Kitchen Utensils Including Glassware, Ceramics, Enamel, Earthenware and Plastics)

  • 최재천;박세종;고혜아;이주연;엄미옥;김미혜
    • 한국식품위생안전성학회지
    • /
    • 제29권4호
    • /
    • pp.334-339
    • /
    • 2014
  • 국내 유통 중인 총 391건의 유리제, 도자기제, 법랑, 옹기류, 폴리에틸렌제 및 폴리프로필렌제 식품용 기구 및 용기 포장 중 이행 우려가 있는 납, 카드뮴, 비소, 안티몬, 6가크롬 및 수은에 대하여 이행량을 조사하고 안전성 평가를 실시하였다. 29건의 도자기제 및 법랑 검체에서 현행 식품용 기구 및 용기 포장 공전상의 용출규격 이하인 납, 카드뮴 및 안티몬이 이행되었다. 이행량 결과를 토대로 안전성 평가 시나리오에 적용하여 이행된 납, 카드뮴 및 안티몬의 EDI를 산출한 후 TDI와 비교하여 위해도를 평가하였다. 도자기제 기구 이행 납 및 카드뮴의 위해도는 TDI 대비 0.25%, 0.11% 수준이었고 법랑 기구 이행 납, 카드뮴 및 안티몬의 위해도는 TDI 대비 0.33%, 1.52% 및 0.13% 수준이었다. 결론적으로 검토된 평가 항목들의 위해도는 TDI 대비 최대 1.52%에 불과한 것으로 조사되어 안전한 수준인 것으로 사료되었다. 이러한 결과들은 앞으로 기구 및 용기 포장의 안전관리를 위한 과학적인 근거자료로 이용될 수 있을 것으로 판단된다.

독일 통일과정에서 문화유산 조사와 보존관리 - 고고학 조사와 유적 보존을 중심으로 - (Research on Cultural Heritage and Its Conservation in the Process of Unification in Germany - Focusing on Archaeological Investigations and Site Conservation -)

  • 김종일
    • 헤리티지:역사와 과학
    • /
    • 제52권2호
    • /
    • pp.38-61
    • /
    • 2019
  • 20세기 초반까지 독일 고고학에서는 유물 유적에 대한 객관적이고 섬세한 관찰을 중시하는 연구 경향과 어느 정도의 민족주의 혹은 자민족 우월주의의 입장에서 물질문화의 연구를 통해 과거의 민족 혹은 종족의 자취를 찾아 그들의 시공간적 범위를 확정하려는 시도가 공존하고 있었다. 2차 세계대전이 끝나고 독일이 동서로 분열된 이후 구 서독에서는 전통적인 독일 고고학의 전통을 계승하여 유물 유적의 관찰과 목록화, 그리고 편년과 분포의 확인에 집중하였다. 구 동독에서는 맑스주의의 사적 유물론에 입각한 역사의 합법칙적 발전 과정을 물질 자료를 통해 입증하려는 시도와 함께 과거의 문화유산이 갖고 있는 역사적 가치를 사회주의의 이념에 충실하거나 혹은 그 발전에 기여한 정도에 따라 평가하고자 하였다. 그럼에도 불구하고 구 서독과 구 동독의 고고학은 분열 이전의 독일 고고학의 전통을 상당히 공유하고 있었다. 분열 이후에도 고고학자들의 교류가 어느 정도 지속되고 있었고 구 동독의 고고학이 구 서독의 고고학, 그리고 유럽 고고학 전체에서도 인정받을 수 있는 의미 있는 나름의 연구 성과를 내고 있었다. 이러한 사실을 바탕으로 동 서독 고고학의 통합이 제도적인 측면에서는 어느 한쪽에 의한 일방적인 통합이었다는 한계에도 불구하고 양자가 비교적 단시일 내에 통합을 완성할 수 있는 계기를 마련하게 되었다. 한국의 경우에도 고고학 연구와 문화유산 보존의 측면에서는 공통의 연구사적 전통을 공유하고 상호 교류(공동 조사와 학술 교류 등)에 더욱 노력할 필요가 있다. 비록 맑시즘과 주체사상에 의거한 형식화된 해석이라 하더라도 이를 비판적으로 검토하여 필요한 경우 받아들이려는 열린 마음을 통해 남북한 고고학 및 문화유산 보존의 간극을 점차적으로 줄여나가는 작업은 더 이상 미룰 수 없는 과제라고 할 수 있다. 독일의 사례는 이러한 작업을 보다 효율적으로 진행하는 데 나름의 시사점을 던져줄 수 있으리라 생각한다.

주역 점(占)의 실제 체험-죽음, 신 그리고 사랑: 아버지의 영전(靈前)에서 (Actual Experience of the Oracle of the I Ching-Death, God and Love: In Front of My Father's Spirit)

  • 이주현;이부영
    • 심성연구
    • /
    • 제37권2호
    • /
    • pp.149-183
    • /
    • 2022
  • 동시성 현상으로서 이해되는 주역 점(占)을 체험하기 위해서는 사람이 곤경에 처했을 때, 즉 의식이 한계에 도달했을 때 진지한 마음으로 물음을 던지는 종교적 자세(religo)가 전제되어야 한다. 그것은 단지 수동적인 자세가 아니라 지금 내가 무엇을 할 수 있는지를 묻는, 겸손하지만 적극적인 자세이다. 초의식과 접속하여 신탁을 얻는 주역 점의 체험은 의식의 자아가 무의식의 원형과 대화와 토론을 시도하는 적극적 명상과 일맥상통하며, '무의식의 절대지, 자기원형의 리듬을 찾아가는 과정'이다. 나는 부친상을 당하기 1달 전, 대화가 불가능한 아버지를 간병하면서 '지금 아버지와 나를 위해 무엇을 할 수 있습니까?' 라는 질문을 던지고 주역 점을 쳐서 주역의 19번째 괘, 지택 임괘(地澤 臨卦)초구 '함림정길(咸臨貞吉), 지행정야(志行正也)'를 점괘로 얻었다. 이 점괘를 통해 자연의 섭리에 '기쁘게 순종'하면서 겨울 뒤에 찾아올 봄을 기다리는 심정으로 죽음 이후 생을 기다리는 자세, 그리고 통속적인 이해타산을 넘어서는 인간 마음 속에서 우러나오는, 무한한 것(분석심리학적 용어로는 '자기[Self]')과의 만남에서 얻은 감동을 굳건한 마음으로 지켜가는 것이 인생의 참뜻을 바르게 행하는 것임을 나는 배울 수 있었다. 그리고 부친상 6개월 전에 꾼, '저승'에 대한 꿈에서 '죽음 뒤에도 이어지는 것이 있다는 것이 진실'이라는 직접적인 메시지의 충격 이외에도 확충의 과정을 통해 드러난 폐쇄 병동과 황천의 유사성-내향화를 통한 정신의 재생, 하얀 철문-, '영원을 향한 창문'을 통해 통과의례를 거쳐 새로운 것을 받아들이려는, 열린 태도의 중요성을 배웠다. 그리고 천주교의 교리 '성인의 통공'-산 자와 죽은 자가 서로를 도우며 나선형으로 순환하는 과정-이 우리의 정신 내에서 의식과 무의식이 상호작용하는 개성화 과정의 상징으로서 뿐만 아니라 실제일 수도 있다는 조그마한 희망을 아버지의 장례식에서 진행된 '연도(煉禱)'의례를 통해 어렴풋이 품게 되었다. 그리고 인생에서 만난 많은 인연들의 조문을 통해 받은 위로 속에서 무한한 것과 접촉하여 맺어지는 길은 바로 눈 앞에 있는 존재들과 사랑하는 것이 그 시작이라는 답을 나는 우선 얻었다. 이러한 연속적인 체험을 분석심리학적 입장에서 이해하고자 했다.