• Journal of Biosystems Engineering
• /
• v.12 no.2
• /
• pp.28-37
• /
• 1987

Operation of rice whiteners has been depending on operator's experience only and very limitted data are available for operational criteria of rice whiteners in Korea. With developments of new rice varieties and with a tendency of automation of machine operations for precision control, operational criteria depending on physical characteristics of rice grains arc required for an improvement of milled rice recovery and the performance of rice whitening systems. An experimental study was conducted to identify operational criteria of a rice whitening system consisted with an abrasive-aerated whitener developed newly and a frictional-aerated whitener being used commercially. Further, comparisons were made between the performance of the rice whitening system adopted for this study and a commercial system used in small scale milling plants. Results of this study are summarized as follows: 1. Total number of passes necessary for the final white rice in the combined whitening system depended exclusively on the counter pressure level of the frictional whitener successive to the abrasive whitener. 2. The counter pressure required for whitening Japonica type rice variety (Akibare) was higher by about 1.6 times than that for Japonica type (Pung-san), when other conditions were kept at the same. 3. Radial pressure in the whitening chamber of the frictional whitener should be maintained between 1.5 to $2.1kg/cm^2$ for the completion of whitening within 5 to 3 passes regardless of rice varieties. Hence, it was found that the radial pressure in the whitening chamber could be used as an operational criteria to control the counter pressure level. 4. The following regression equation was found between radial pressure($R_p$) in whitening chamber and electric power consumption of the whitening system: $$EPC=-0.545\;R^2_p+1.277\;R_p+0.874[KWH/100kg]$$ 5. The following multiple regression equation was found among radial pressure ($R_p$), counter pressure ($C_p$), and bioyield point ($B_i$), length (L) and width (W) of brown rice. $$R_p/(B_i/W^2)=0.547\{C_p/(B_i/W^2)\}^{0.365}(L/W)^{0.120}(R^2=0.9897)$$ 6. The milled rice recovery and machine efficiency (kg/KWH) from the combined whitening system were higher by about 2.0% point and by 15 to 27% point than those from the conventional system, respectively.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.105-117
• /
• 2012

Objectives: This study aimed to assess the concentration of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS) in blood and factors controlling their exposure among Koreans. Methods: Study subjects were selected to include 718 members of the general population residing in five metropolitan cities and the Gangwon Province area from August 2008 to January 2009. A questionnaire was administered to investigate lifestyle, socio-demographic characteristics, and other related factors. Blood samples were collected and extracted using solid-phase extraction and anion-exchange methods, and quantified by high-performance liquid chromatograph (HPLC, Agilent 1200 Series) coupled with a Triple Quad LC-MS/MS system (Agilent 6410). Results: Geometric mean concentrations of PFOA and PFOS in the blood were measured as 1.82 and 6.06 ng/ml, respectively. Mean PFOA and PFOS concentrations generally increased with age in both genders. Blood PFOA concentration was significantly different according to such variables as age, family income, residential district, and province. Blood PFOS concentration was significantly different by such variables as gender, age, lifestyle factors such as regular exercise, alcohol consumption, and smoking status. Also, family income, hazardous facilities, job classification, and province contributed significantly to differences in blood PFOS concentration levels. Conclusions: Blood PFOA and PFOS concentrations in Koreans were similar with those found in Japan, the USA, and Germany, but less than those in Australia. PFOA and PFOS exposure seems to be affected by a variety of factors in Korea. Therefore, investigation is required for each factor to assess the relative contribution of different variables.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.283-289
• /
• 2013

This study was performed to investigate the biological characteristics of the brown lacewing Micromus angulatus (Stephens) at four different temperatures (15, 20, 25, and $30^{\circ}C$) and $70{\pm}10%$ relative humidity under a photoperiodic regime of 16:8(L:D) h. The developmental threshold and effective accumulative temperature from egg to pupa for M. angulatus were $9.6^{\circ}C$ and 270.3 day-degrees, respectively. The developmental period of egg, larva, and pupa at $25^{\circ}C$ was 4.4, 5.5, and 6.9 days. respectively. The longevity of an adult female M. angulatus was 34.9 days. The oviposition period for M. angulatus was 28.7 days, in which it laid a total number of 515.2 eggs during its life span. The maximum number of eggs laid by a female in a day was 54.8. Daily consumption by M. angulatus at $25^{\circ}C$ was 18.9 $1^{st}$ instars, 47.2 $2^{nd}$ instars, 57.7 $3^{rd}$ instars, and 91.0 adults of the glasshouse potato aphid, Aulacorthum solani. Therefore, M. angulatus could be a promising biological control agent against aphids.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.618-624
• /
• 2020

A portable power supply system for soldiers must be able to supply electric energy corresponding to the power consumption of combat support troops, and have a carrying load in a range that does not impair the combatant's ability to execute operations. In particular, as the total required power of combat equipment increases with the advances in the future soldier system, a portable, lightweight power supply system with high efficiency is essential. A fuel cell has a high energy-to-weight density compared to lithium batteries, which are used mainly as a military power source system. Therefore, it is capable of miniaturization and lightweight, making active R&D to a portable power supply system. In this paper, the characteristics of the fuel cell applied as a portable power supply system, and the R&D trends of domestic and foreign military portable fuel cell systems were investigated. The current status of domestic technology compared to the level of foreign development was analyzed. In addition, future technology development plans are presented based on the consideration factors when developing a portable fuel cell (power supply stability, portability, and cost reduction) so that it can be used when establishing a plan on the development of a portable fuel cell system for the future soldier system.

• Journal of Distribution Science
• /
• v.15 no.8
• /
• pp.75-86
• /
• 2017

Purpose - The online-to-offline (O2O) business model has brought considerable changes to the traditional Chinese business model. The main difference between O2O and pure online consumption is that O2O offers a richer experience and word-of-mouth. it is easier to trigger online word-of-mouth. However, few scholars have been concerned about the impact of experiential value on customer satisfaction and online word-of-mouth (e-WOM) in the study of O2O. This study takes the O2O business model in China's catering industry as its research object and uses structural equation modelling to analyze the impact of online and offline experiential values on customer satisfaction and e-WOM. Research design, data, and methodology - According to previous researches, consumer experiential value is mainly divided into return on investment (economy and efficiency), service excellence, playfulness and aesthetics. According to the characteristics of O2O in China's catering industry, this study divides the online experience value into efficiency and economy (return on investment). The offline part is divided into return on investment (economy and efficiency), service excellence, playfulness and aesthetics. Using a web-based survey, we collected 303 valid samples. Structural equation modelling was used to create the research model. Results - The results show that efficiency (online) and service excellence (offline) have a significant effect on customer satisfaction. Economics (online) and playfulness (offline) have a positive impact on customers' e-WOM. In addition, the higher the customer satisfaction, the greater the positive impact on the spread by word of mouth. However, aesthetic(offline) and return on investment(offline) have no significant impact to customer satisfaction and e-WOM. Conclusions - The study findings show that the key to boost customer satisfaction in the catering industry is to improve product quality and service. Although traditional competitive strategies such as online discount have been questioned by many scholars about their decreasing effectiveness, they are indispensable means to attract online traffic and trigger e-WOM. The traditional enterprises can reconstruct traditional business processes through the O2O model to effectively improve customer satisfaction and word of mouth by improving the experiential value of economy and efficiency. Additionally, it can be used as the natural advantages of online communication to induce customers to engage in word of mouth and attract more potential customers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.455-466
• /
• 2020

In this study, we built a thermal model for SNIPE 6U nano-satellite which has scientific mission for measuring science data in near Earth space environment and described thermal design based on the thermal model. And the validity of the thermal design was verified through the on-orbit thermal analysis. The thermal design was carried out mainly on the passive thermal control techniques such as surface finishes, insulators, and thermal conductors in consideration of the characteristics of the nano-satellite. However, the components with narrow operating temperature range and directly exposed to the orbital thermal environments, such as a battery and thrusters, are accomodated with heaters to satisfy the temperature requirements. On-orbit thermal analysis conditions are based on the basic orbital conditions of the satellite, and thermal analysis was performed for Normal mode, Launch & Early Orbit Phase (LEOP), Safehold mode, and Maneuver mode which are classified by the power consumption and the attitude of the satellite according to the mission scenario. The analysis results for each mode confirmed that every component satisfies the temperature requirement. In addition, the heater capacity and duty cycle of the battery and thruster were calculated through the analysis results of the Safehold mode.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.12-25
• /
• 2020

The purpose of this study was to obtain information about the type of drones suitable for the management of entrants and entrants of islands in the marine national park. The research sites were 25 islands in the Hallyeohaesang National Park. The target islands were divided into three zones, and were investigated with different types of drones. The survey period was from October to November, 2019. As a result of the operation of drone airframe, drone with fixed wings was found to be favorable for the management of marine parks in medium and long distances compared to other types, but stopping flights for broadcasting was found to be unsuitable. Drone with rotational wings was found to be suitable for image acquisition and broadcasting through close flight. However, it was deemed suitable for short and medium distance flights because of the fast battery consumption. In the case of helicopter rotorcraft drone, image acquisition and broadcasting were possible, but noise and vibration caused by propellers were disadvantageous. The number of entrants to the islands totaled 410 and the main act was fishing. The proportion of entrants to the islands in Area A was higher than that of other areas, and thus it was deemed more necessary to manage the area. Broadcasting was found to have had a positive effect on the management of fishers.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.281-287
• /
• 2012

This study covered the Korean consumers' Luxury Purchase Motivation and benefit factors associated with the consumption behavior. Causal structural relationships between these variables were examined. Examined for the preceding literature on the basis of an analysis of the factor structure of Korean luxury purchase motivation factors and use benefits for Luxury of purchasing to help any relationship whether these factors were confirmed. Firstly, the results confirm the relevance luxury purchase motivations and benefits among the factors, materialistic motives, the economic benefits and practical benefits factors had a positive impact. Personal benefits and social benefits, and cost-benefit factors had a positive impact on the psychological motives. Secondly, the luxury of buying does not have a significant effect on the material motives. The other hand, had a positive effect on psychological motives. Third, the benefits of relevant factors on the purchase of luxury used. Personal factors, economic and practical benefits, they did not have a significant impact. Social benefit factors had a negative impact. Finally mediated side effects among these factors was confirmed. Only psychological motives mediating effects on factors of social benefits through the purchase of crazy. The results of this study to describe the consumer luxury purchasing behavior on buying behavior, as well as a simple linear relationship between the factors for the benefits to be gained by using luxury purchase motivation indirectly explained the process for luxury marketers in the future, and psychological characteristics offered to consider the implications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.51-62
• /
• 2003

This paper presents a novel survivor memeory management and decoding techniques with sequential backward state transition control in the trace back Viterbi decoder. The Viterbi algorithm is an maximum likelihood decoding scheme to estimate the likelihood of encoder state for channel error detection and correction. This scheme is applied to a broad range of digital communication such as intersymbol interference removing and channel equalization. In order to achieve the area-efficiency VLSI chip design with high throughput in the Viterbi decoder in which recursive operation is implied, more research is required to obtain a simple systematic parallel ACS architecture and surviver memory management. As a method of solution to the problem, this paper addresses a progressive decoding algorithm with sequential backward state transition control in the trace back Viterbi decoder. Compared to the conventional trace back decoding techniques, the required total memory can be greatly reduced in the proposed method. Furthermore, the proposed method can be implemented with a simple pipelined structure with systolic array type architecture. The implementation of the peripheral logic circuit for the control of memory access is not required, and memory access bandwidth can be reduced Therefore, the proposed method has characteristics of high area-efficiency and low power consumption with high throughput. Finally, the examples of decoding results for the received data with channel noise and application result are provided to evaluate the efficiency of the proposed method.