• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1753-1762
• /
• 2000

An inverse method is presented to obtain material's flow properties by using small punch test. This procedure employs, as the objective function of inverse analysis, the balance of measured load-di splacement response and calculated one during deformation. In order to guarantee convergence to global minimum, simulated annealing method was adopted to optimize the current objective function. In addition, artificial neural network was used to predict the load-displacement response under given material parameters which is the most time consuming and limits applications of global optimization methods to these kinds of problems. By implementing the simulated annealing for optimization along with calculating load-displacement curve by neural network, material parameters were identified irrespective of initial values within very short time for simulated test data. We also tested the present method for error-containing experimental data and showed that the flow properties of material were well predicted.

• Korean Journal of Organic Agriculture
• /
• v.9 no.4
• /
• pp.1-27
• /
• 2001

The number of organic farms are increasing in European countries during last 10 years. Most European governments are giving subsidies for organic farmers as well as converting organic farms from conventional farming method. The price level of most organic products are higher than price level of conventional products in general. However, there are certainly some market demand problems in organic products in some countries. Organic farms will be increased in 2005 and 2010 for 10∼20% of the total agricultural area in some European countries. Government subsidy payment is also increasing. Therefore, many farmers are going to change into organic farming method from conventional farming. However, there will be certainly some market demand problems in future because of national economic growth problems. At the same time, the quality of soil can be improved and status of health of urban consumers should be improved by consuming organic products.

• Archives of design research
• /
• v.15 no.1
• /
• pp.235-245
• /
• 2002

Psychological phenomenon of human beings that are considered as creation of symbols endues various meanings to the objects and through this process, it develops society, culture and religion. This paper aims to examine the relationship between objects and human beings in the current circumstances that are summarized as "Pluralism" and "Age of Consumption". For this purpose, I introduced the semiology system and established the concept that is "Consumption of Meaning". The method that the meaning of goods as the modern objects is consumed is defined through three meaning analyses that are social, psychological and cultural. In addition, as defining how an object have its unique meaning, this paper creates the new interpretation on the role of industrial design that searches and constructs the existential area in the real world related to the creation and adjustment of meanings.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.636-643
• /
• 1995

The accurate determination of the fuel-cladding gap conductance as functions of rod burnup and power level may be a key to the design and safety analysis of a reactor. The incorporation of a sophisticated gap conductance model into nuclear design code for computing thermal hydraulic feedback effect has not been implemented mainly because of computational inefficiency due to complicated behavior of gap conductance. To avoid the time-consuming iteration scheme, simplification of the gap conductance model is done for the current design model. The simplified model considers only the heat conductance contribution to the gap conductance. The simplification is made possible by direct consideration of the gas conductivity depending on the composition of constituent gases in the gap and the fuel-cladding gap size from computer simulation of representative power histories. The simplified gap conductance model is applied to the various fuel power histories and the predicted gap conductances are found to agree well with the results of the design model.

• Transactions of Materials Processing
• /
• v.24 no.1
• /
• pp.13-19
• /
• 2015

For an accurate analysis of hot stamping, a coupled simulation with different aspects of the process(i.e. mechanical, thermal, and phase transformation) is needed. However, coupled simulations are time consuming and costly. Therefore, the current study proposes a simplified method focused on the forming for the hot stamping simulation of a coupled torsion beam axle (CTBA) tubular beam. In this simplified method, non-isothermal conditions were assumed and only conduction was considered, since it represents the majority of the heat transfer during hot stamping. In addition, temperature and strain rate effects were also included. Moreover, an isothermal simulation was conducted and compared with a non-isothermal simulation. Finally, the simulations were verified by experiments. In conclusion, the proposed method is shown to be effective for the development of tube-type parts, and it effectively predicts the deformation of the tubular beam during hot stamping.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3201-3204
• /
• 2000

In general, analog tester or strip chart recorder have been used to measure the corrosion potential of structures such as gas pipelines, oil pipelines, hot water pipelines, power cables etc. Recently, automatic digital data logger substitutes for these manual equipment because using these manual equipments are tedious and time consuming. However, digital data logger also has a shortcoming, that is, short measuring time because of the short lifetime of batteries. Therefore, we developed a long lifetime and low power loss battery taking advantage of galvanic series. In this paper, the results of development for power generator using two metals and DC/DC converter in order to obtain enough voltage for the operation of digital data logger. DC/DC converter operates with 0.5[V]. Its output voltage is 3.5[V] and output current is from 60[mAh] to 1,200[mAh].

• Genomics & Informatics
• /
• v.7 no.1
• /
• pp.46-48
• /
• 2009

Finishing is the most time-consuming step in sequencing, and many genome projects are left unfinished due to complex repeat regions. Here, we have developed BACContigEditor, a prototype shotgun sequence finishing tool. It is essentially an editor that visualizes assemblies of shotgun sequence fragment reads as gapped multiple alignments. The program offers some flexibility that is needed to rapidly resolve complex regions within a working session. The sole purpose of the release is to promote collaborative creation of extensible software for fragment assembly editors, foster collaborative development, and reduce barriers to initial tool development effort. We describe our software architecture and identify current challenges. The program is available under an Open Source license.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.97-101
• /
• 2007

As the use of vehicle route application and LBS(location based service) are fast grew, the importance of maintaining road network data is also increased. To maintain road data accuracy, we can collect road data by driving real roads with probe vehicle, or using digital image processing for the extraction of roads from aerial imagery. After compare the new road data to current database, we can update the road database, but that job is mostly time and money consuming or can be inaccurate. In this paper, an updating method of using GPS(global positioning system) enabled cell phone is proposed. By using GPS phone, we can update road database easily and sufficiently accurately.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.231-236
• /
• 2013

Some cytotoxicity studies for the interpretation of the interaction between nanoparticles and cells are non-mechanistic and time-consuming. Therefore, non-biological screening methods, which are faster and simpler than in-vivo and in-vitro methods, are required as alternatives to current cytotoxicity tests. Here, we proposed a simple screening method for the analysis of the interaction between several AgNPs (bare-, citrate-, and polyvinylpyrrolidone-coating) and dye-containing vesicles acting as a biomimetic cell-membrane. The interaction between AgNPs and vesicles could be evaluated readily by UV-vis spectra. Absorbance deviation in UV-vis spectra revealed a large attraction between neighboring particles and vesicles. This was confirmed by (Derjagin, Landau, Verwey, and Overbeek) theory and DMF (dark-field microscopy) analysis. This proposed method might be useful for analyzing the cytotoxicity of nanoparticles with cell-membranes instead of in vitro or in vivo cytotoxicity tests.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.4
• /
• pp.448-458
• /
• 1999

This paper proposes sequential control charts with an upper bound on sample size. Existing sequential control charts have no restriction on the number of observations at a sampling point. For situations where sampling and testing an item is time-consuming or expensive, sequential control charts may not be directly applied. When the number of observations in a sampling point reaches the upper bound and there is no out-of-control signal, the proposed cumulative sequential control chart defers the decision to the next sampling point of which starting value is the value of the current statistic. Two Markov chains, inner and outer chains, are used to derive the formulas for evaluating the performance of the proposed chart. It is compared with $\bar{X}$ and cumulative sum control charts with fixed and variable sample sizes. The fast initial response (FIR) feature is studied. Guidelines for the design of the proposed charts are also given.