• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.224-226
• /
• 2000

Consumer electronics is rapidly digitalized invoking the necessity of digital signal transmission. Moreover, even in consumer electronics, occasionally signal speed is over 1Gbps and long distance transmission(over 5 meters) is required. For these requirements, even though optical transmission is ideal, cost problem has blocked up its entrance to consumer market. However, inexpensive and high speed optical devices such as VCSEL, PIN or MSN PD with large detecting area and low capacitance and Plastic Optical Fiber have been developed so that optical solution can be compete with electrical one in consumer electronics.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1904-1909
• /
• 1991

Software linear and exponential acceleration/deceleration algorithms for control of machine axes of motion in industrial robots and CNC machine tools are proposed. Typical hardware systems used to accelerate and decelerate axes of motion are mathematically analyzed. Discrete-time state equations are derived from the mathematical analyses for the development of software acceleration/deceleration algorithms. Synchronous control method of multiple axes of motion in industrial robots and CNC machine tools is shown to be easily obtained on the basis of the proposed acceleration/deceleration algorithms. The path error analyses are carried out for the case where the software linear and exponential acceleration/deceleration algorithms are applied to a circular interpolator. A motion control system based on a floating point digital signal processor (DSP) TMS 320C30 is developed in order to implement the proposed algorithms. Experimental results demonstrate that the developed algorithms and the motion control system are available for control of multiple axes and nonlinear motion composed of a combination of lines and circles which industrial robots and CNC machine tools require.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.491-494
• /
• 2003

This paper presents a new conceptual electromagnetic induction eddy current-based stainless steel plate spiral type heater for heat exchanger or Dual Packs Heater in hot water producer, boiler steamer and super heated steamer, which is more suitable and acceptable for new generation consumer power applications. In addition, all active clamped edge resonant PWM high frequency inverter using trench gate IGBTs power module can operate under a principle oi zero voltage soft communication with PWM is developed and demonstrated for a high efficient Induction heated hot water producer and boiler in the consumer power applications. This consumer induction heater power appliance using active clamp soft switching PWM high frequency inverter is evaluated and discussed on the basis of the simulation and experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.306-311
• /
• 1992

We propose software algorithms which provide the characteristics of acceleration/deceleration essential to high dynamic performance at the transient state where industrial robots or CNC machine tools start and stop. The path error, which is one of the most significant factors in performance evaluation of industrial robots and CNC machine tools, is analyzed for linear, exponential, and parabolic acceleration/deceleration algorithms in case of circular interpolation. The analysis shows that the path error depends on the acceleration/deceleration routine and the servo control system. In experiments, the entire control algorithm including the proposed acceleration/deceleration algorithms is executed on the motion control system with a floating point digital signal processor(DSP) TMS320C30 as a CPU. The experimental results demonstrate that the proposed algorithms are very effective in controlling axes of motion of industrial robots or CNC machine tools with the desired characteristics.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.351-352
• /
• 2014

In this paper, series-arc detection algorithm for the consumer appliances is proposed. This algorithm uses varying frequency and RMS values at series-arc state. This is confirmed to emulate arc detecting with measuring current data.

• 전자진흥
• /
• 제3권8호
• /
• pp.67-70
• /
• 1983

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.484-488
• /
• 2001

The grid voltage of commercial utility power source hi Japan and USA is 100rms, but in China and European countries, it is 200rms. In recent years, In Japan 200Vrms out putted single phase three wire system begins to be used for high power applications. In 100Vrms utility AC power applications and systems, an active voltage clamped quasi-resonant Inverter circuit topology using IGBTs has been effectively used so far for the consumer microwave oven. In this paper, presented is a half bridge type voltage-clamped high-frequency Inverter type AC-DC converter using which is designed for consumer magnetron drive used as the consumer microwave oven in 200V utility AC power system. This zero voltage soft switching Inverter can use the same power rated switching semiconductor devices and three-winding high frequency transformer as those of the active voltage clamped quasi-resonant Inverter using the IGBTs that has already been used for 100V utility AC power source. The operating performances of the voltage source single ended push pull type Inverter are evaluated and discussed for consumer microwave oven. The harmonic line current components In the utility AC power side of the AC-DC power converter operating at ZVS­PWM strategy reduced and improved on the basis of sine wave like pulse frequency modulation and sine wave like pulse width modulation for the utility AC voltage source.

• 한국경제지리학회지
• /
• 제15권2호
• /
• pp.292-303
• /
• 2012

본 논문은 중국의 청도 가전산업이 군집되는 과정에서 나타나는 연구개발(R&D) 네트워크의 구조와 공간적 특징을 분석하고자 했다. 청도 가전산업의 연구개발 네트워크 분석 결과는 다음과 같다. 청도 가전산업은 정부 주도하의 대기업을 중심으로 인근 지역에 하청업체들이 집적을 이루고 있었지만, 청도 가전산업의 주요 기술혁신 요인인 대기업의 기업내부 자체 개발, 지역 내 타 기업과의 협력, 지역 내의 대학 및 공공연구기관과의 협력 수준은 낮게 나타났다. 청도 가전산업 대기업은 이와 같은 단점을 극복하기 위하여 지역적 협력보다는 지역 외 기업과의 협력을 적극 도모하고, 지역 외의 대학 및 연구기관과의 협력을 강화하는 전략을 선택하고 있다. 이는 청도 가전산업의 산학연 협력 네트워크가 아직 활성화되지 않았음을 의미한다. 청도에 가전산업을 중심으로 한 지역혁신체계가 구축되기 위해서는 지역 내 기업-대학-공공연구기관 간 긴밀한 네트워크가 이루어져 공동체적 지역 산업 분위기가 형성되어야 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.458-461
• /
• 2002

The consumer in the 21$\^$st/ century e-business era is developing a taste fur greater professionalism diversity, internationalism and large-scale integration of his or her demands. With these changes in the consumers preferences in mind, e-businesses need to develop a real time track and trace system to accommodate their logistical and consumer service operations. This research paper discusses the development of a object-oriented logistics tracking database system and a web service tracking component necessary to efficiently store and manage the movements of postal goods and provide real time information on logistics trading.

• Journal of Power Electronics
• /
• 제6권2호
• /
• pp.95-103
• /
• 2006

In this paper, a novel prototype of auxiliary switched capacitor assisted voltage source soft switching PWM Single-Ended Push Pull (SEPP) series capacitor compensated load resonant inverter with two auxiliary edge resonant lossless inductor snubbers is proposed and discussed for small scale consumer high-frequency induction heating (IH) appliances. The operation principle of this inverter is described by using switching mode equivalent circuits. The newly developed multi resonant high-frequency inverter using trench gate IGBTs can regulate its output AC power via constant frequency edge-resonant associated soft switching commutation by using an asymmetrical PWM control or duty cycle control scheme. The brand-new consumer IH products which use the newly proposed edge-resonant soft switching PWM-SEPP type series load resonant high-frequency inverters are evaluated using power regulation characteristics, actual efficiency vs. duty cycle and input power vs. actual efficiency characteristics. Their operating performance compared with some conventional soft switching high-frequency inverters for IH appliances is discussed on the basis of simulation and experimental results. The practical effectiveness of the newly proposed soft switching PWM SEPP series load resonant inverter is verified from an application point of view as being suitable for consumer high-frequency IH appliances.