• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.331-337
• /
• 2021

Owing to the limited development period and budget of the weapon system, many problems have arisen in the operation stage after mass production. Therefore, engineering changes are also increasing. On the other hand, an analysis of the cause of problems and improvement of the system equipment performed in engineering changes cannot be managed synthetically. Hence, important actual data can only be used once. In particular, unlike hardware where the shape of the equipment is changed or the part number is changed, the contents of software engineering changes are only partially included in the proposal. Moreover, only the extent to which the version of the source package and the executable file has been changed can be identified. Therefore, this paper proposes a method to build and utilize a database for cause analysis and improvement plan data of weapon-system software engineering changes and software technical support. The above utilization measure can contribute to the quality assurance of weapon-system software developed in the future by preemptively applying real-world data when developing similar weapon systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.224-229
• /
• 2018

Korea is experiencing a rapid increase in electricity consumption due to rapid economic development, and many power transmission towers are installed to provide smooth power supply. The high-voltage transmission line is mainly made of aluminum stranded wire, and the wire is loosely guided so that some deflection is maintained. The degree of deflection has a great influence on the quality of the construction and the life of the cable. As the time passes, the shrinkage and expansion occur repeatedly due to the weight of the cable and the surrounding environment. Therefore, periodic monitoring is essential for the management of the power transmission line. In this study, the power transmission lines were monitored using 3D laser scanning technology. The data of the power transmission line of the study area was acquired and the point cloud type 3D geospatial information of the transmission line was extracted through data processing. The length of the transmission line and deflection amount were calculated using the 3D geospatial information of the transmission line, and the distance from the surrounding obstacles could be calculated effectively. The result of study shows the utilization of 3D laser scanning technology for transmission line management. Future research will contribute to the efficiency of transmission line management if a transmission line monitoring system using 3D laser scanning technology is developed.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.174-189
• /
• 2012

This study aims to examine the traditional living space to reflect the environment-friendly design methods and principles of reestablishment. To do so, this study carried on a related literature study and field survey. The traditional living space in terms of the environmental friendliness is reflected on site selection and space composition, and utilization of natural energy and natural materials. Focused on the Kwangajeong in Yangdong Village, this study is to identify eco-friendly techniques on the traditional living space. As a result, it shows that Kwangajeong with the side of the southeast in site selection had been considered in aspect of environmental control such as sunshine and solar radiation. Also building construction techniques had been used to minimize the variation of terrain. In aspect of environmental conservation, Kwangajeong had structurally arranged the gate, an inner yard and an inner floor to allow good ventilation. In aspect of space composition, Kwangajeong with the emphasis of scenic view had utilized the methods that attract external landscape through the control of its fences. Environment-friendly techniques and control principles in traditional space had been developed by a long experience through the long periods and the traditional techniques suitable for local climate and local environment have been developed. The technical development of these techniques to resolve the global environmental and energy issues and create a more pleasant living environment of human beings might be critical.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.164-177
• /
• 2011

This study aims to examine the traditional living space to reflect the environment-friendly design methods and principles of reestablishment. To do so, this study carried on a related literature study and field survey. The traditional living space in terms of the environmental friendliness is reflected on site selection and space composition, and utilization of natural energy and natural materials. Focused on the Kwangajeong in Yangdong Village, this study is to identify eco-friendly techniques on the traditional living space. As a result, it shows that Kwangajeong with the side of the southeast in site selection had been considered in aspect of environmental control such as sunshine and solar radiation. Also building construction techniques had been used to minimize the variation of terrain. In aspect of environmental conservation, Kwangajeong had structurally arranged the gate, an inner yard and an inner floor to allow good ventilation. In aspect of space composition, Kwangajeong with the emphasis of scenic view had utilized the methods that attract external landscape through the control of its fences. Environment-friendly techniques and control principles in traditional space had been developed by a long experience through the long periods and the traditional techniques suitable for local climate and local environment have been developed. The technical development of these techniques to resolve the global environmental and energy issues and create a more pleasant living environment of human beings might be critical.

• Korean Journal of Heritage: History & Science
• /
• v.33
• /
• pp.210-255
• /
• 2000

This study aims to classify the framework and arrangement of interior columns (Naeju) which are used in single-story Buddhist halls into several types, and to develop a theory on the process of changes among those types. Since interior columns are building materials which hold up the roof structure and make partitions in the interior space of halls, their framework and arrangement is closely linked to the development of building technology and is expected to reflect new architectural needs. The kinds of interior columns classified by the shape of framework are goju, chaduju, oepyonju, naepyonju. The arrangement of interior columns can he classified by two methods: One which counts the number of the interior column arrangements in a hall, and the other whose classification relates with the side wall columns - Jeongchibup and yijubup. With the combination of these classifications, we can divide the framework and arrangement of interior columns into 8 types From the remains of Korean and Chinese Architecture, we can presume that before the late-Goryo period, jeongchibup had always been applied in the construction of Buddhist halls, and gamju(column reducing) had only been used in examples of small scale. After the founding of Choseon Kingdom, however, national policy had weakened the economic power of Buddhist temples. Because of that, large-scale outdoor Buddhist mass was replaced by small-scale indoor mass, and for this reason, though the scale of Buddhist halls became smaller, the need for a broad interior space became stronger. Thus in early-Choseon period, reduction of interior columns became widely spread. Those types of framework and arrangement of interior columns where yijubup was applied were developed because the rear interior columns arrangements, in order to expand the interior space, have moved backward. Among these types, yiju-goju and yiju-chaduju were developed for the Buddhist halls with paljak roof(hipped-gabled roof), where the load of their side eaves caused structural problems at the side walls. And oepyonju type was for the small-scale and middle-scale Buddhist halls which needed more interior space but didn't want the extension of roof structure. From the local and periodic distribution of each types, we can conclude that the types jeongchi-goju, jeongchi-chaduju and yiju-chaduju have been settled as typical technique of local carpenters. Oepyonju was developed later than the other types, but for its merit of low cost, it became a popular type across the nation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.272-278
• /
• 2018

Traffic volume has been greatly increasing due to urban development and the improvement of living standards, and many complaints are being raised due to the increasing road noise. As a countermeasure against these problems, highly soundproof walls are installed on the sides of roads. However, the ability to bear wind loads is a major design requirement for soundproof walls, which contributes to the exponential increases in construction costs and restricts the height of the walls. The aim of this study is to improve the performance of soundproof walls and to dramatically reduce wind loads while maintaining excellent price competitiveness. Based on Helmholz's resonator theory, a new concept is proposed for a ventilation-type soundproofing plate that can pass through a fluid like air and reduce noise. A full-scale metal soundproofing plate was produced to satisfy the quality standards of highways by conducting a sound-pressure transmission-loss test, wind tunnel test, and material quality test. To verify the reliability, the wall was manufactured and installed, and the sound insulation effect was examined by measuring the noise over time. In the future, ventilated soundproof walls on roads could create a pleasant living environment due to the high noise-insulation effect.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.605-618
• /
• 2018

Korea follows the slope design criteria during construction. It was enacted by the Ministry of Land, Transport and Maritime Affairs. There are cases where the Soil-nail is designed as a measure to secure slope stability. The arrangement of the soil-nail may be arranged at equal intervals or may be arranged differently depending on the soil failure model. The optimum design of the countermeasure method is determined by securing stability of the slope through optimization of dimensions and shape. However, when uniform nails are placed at low elevations in slopes, the standard safety factor is exceeded, which may hinder economic design. It is preferable to arrange the reinforcement of the nails over the entire slope. When the horizontal spacing of the nails was topology optimized according to the slope height, it was possible to minimize the amount of reinforcement while satisfying the standard safety factor. Since the active load is reduced in the section where the slope height is lowered, the safety factor after reinforcement may be excessively increased. Therefore, the phase optimization method is proposed as an economical optimal design method using the reinforcing shape density. In addition, a relational expression was designed to optimize the horizontal spacing by slope height.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.305-320
• /
• 2021

Due to COVID-19, the education and training environment in vocational competency development has changed significantly. In vocational education and training, where the proportion of face-to-face training is more extensive than in other areas of education, some training courses had no choice but to be converted to online. This study presents a distance training system plan for non-contact vocational training by analyzing the learner's non-contact learning experiences. Non-face-to-face education experiences were investigated for learners of private vocational training institutions, universities, and public higher vocational training institutions. The main contents of the survey were to analyze the non-face-to-face learning experiences of these learners for the educational environment and educational purposes. Based on the results of the learners' non-face-to-face learning experiences, a draft of a remote training system construction plan for non-face-to-face education was composed, and a Delphi study was conducted on the draft non-face-to-face remote training system. A method for establishing a distance training system including non-face-to-face teaching and learning strategies, learning and operation support was proposed with these results.

• The Korean Journal of Archival Studies
• /
• no.70
• /
• pp.85-117
• /
• 2021

The purpose of this study is to investigate and analyze the current status of unit tasks, unit task operation, and record management problems used by local governments, and to present improvement measures using text-based big data technology based on the implications derived from the process. Local governments are in a serious state of record management operation due to errors in preservation period due to misclassification of unit tasks, inability to identify types of overcommon and institutional affairs, errors in unit tasks, errors in name, referenceable standards, and tools. However, the number of unit tasks is about 720,000, which cannot be effectively controlled due to excessive quantities, and thus strict and controllable tools and standards are needed. In order to solve these problems, this study developed a system that applies text-based analysis tools such as corpus and tokenization technology during big data analysis, and applied them to the names and construction terms constituting the record management standard. These unit task operation support tools are expected to contribute significantly to record management tasks as they can support standard operability such as uniform preservation period, identification of delegated office records, control of duplicate and similar unit task creation, and common tasks. Therefore, if the big data analysis methodology can be linked to BRM and RMS in the future, it is expected that the quality of the record management standard work will increase.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.167-176
• /
• 2021

Incheon Port urgently requires designation of a free trade zone to pursue development linked with the port hinterland while promoting continuous growth of the port. This study aims to evaluate the optimal location and derive policy implications for the designation of a free trade zone and analyzed factors property divided by groups. This study used the Consistent Fuzzy Preference Relation (CFPR) analysis technique to derive a practical construction direction by quantifying and evaluating linguistic measures. As a result, the Incheon New Port hinterland showed the highest location competitiveness among the four candidate areas of Incheon New Port hinterland, Aam Logistics Complex 2, North Port hinterland, and Gyeongin Port hinterland. Among the eight evaluation factors consisting of qualitative and quantitative factors, the Incheon New Port hinterland ranked no. 1 in all the four qualitative factors and one quantitative factor and received the highest total score. Also, Group 1 presented 'possibility to attract tenant companies' as first. Group 2 was 'complex size' and Group 3 was also 'possibility to attract tenant companies'. This study has the implication for suggesting the factors and evaluation structure of Free Trade Zone. Future research requires detailed empirical studies, such as expanding the subject of study or selecting factors that reflect the interests of each group.