• 한국조경학회지
• /
• 제20권1호
• /
• pp.39-52
• /
• 1992

In order to make plan for landscape construction by ecological methods in Yukong R & D Complex site, environmental factors and structure of plant community were investigated and analyzed around Yukong R & D Complex site of Daeduk. The result of this study were as follows: 1. In the result by the classification of TWINSPAN and ordination (DCA) techniques for analysing of plant community structure, thirty plant community structure, thirty plots were divided into four groups according to soil moisture and succession trends were seem to be from the development of subsidiary vegetation through Pinus densiflora, Quercus spp., Robinia psudoacasia community to Q. acutissima community. So this result was proposed to validity of vegetation introduction for planning of ecological landscape construction in studied site. 2. On the analysis of environmental factors by ordination techeniques, the plant community were divided by soil moisture. Soilcondition will be fertilized by introduction of broad-leaved tree and the development of succession trends from the present state of plant community to Q. acutissima community. 3. The problems of horiticultural places happened to studied site, so horiticultural places for ecological landscape construction was proposed planting techniques that were considered to soil suitability, economical efficiency, native species and wildlife. 4. If we attempt to ecological landscape designs on natural systems and use natural processes to achieve desired end-points, we are more likely to produce self-sustaining solutions.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.604-605
• /
• 2015

To secure quality of dam construction needs appropriate construction duration. Tight construction schedule may have negative influence on infrastructure quality, work safety and maintenance cost. It is necessary to reflect proper construction duration in the planning phase. There have been standards for estimating construction duration of building and industrial complex development but dam construction have not. In order to estimate construction duration of CFRD, feasible study reports and design reports were analyzed to acquire available information. After that, considering on construction duration methods such as comparison with similar cases, approximate estimating formula, approximate quantity assumption were adapted to Critical Path items. Hence, this study present framework for construction duration estimating of CFRD in the planning phase. This framework can be applied other types of dam along the same line.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1055-1060
• /
• 2005

In evaluating the stability of underground structures and designing prevention methods against the lateral flow, it is necessary to predict the amount and the distribution of the lateral earth pressure acting on these retaining structures. However, because the lateral deformation of real ground is a very complex phenomenon influenced by interaction between volumetric deformation bringing an increase of stability of ground and shear deformation causing failure of ground, any appropriate methods for estimating the lateral earth pressure in consideration of the geotechnical properties of ground and the construction conditions in embankment have not been developed as yet. Therefore, a prediction method, which considers effects of a construction speed of embankment, using the Boussinesq's solution based on the elasticity theory without using complex numerical analyses such as finite element analyses is proposed in this research.

• 한국건축시공학회지
• /
• 제5권1호
• /
• pp.89-96
• /
• 2005

The increase of hish-rise residential-commercial buildings is required to cut down a term of works and the cost of construction. Reinforced concrete structures and steel framed reinforcement concrete that are commonly used have the difficulty in reducing them. Therefore, the purpose of this study is to propose a new precast concrete complex system and to analyze its economical feasibility. The economic analysis is performed through comparing the cost of a high-rise reinforced building that was already constructed with that of the new proposed precast concrete system, which is limited to structural frame work of typical floors. This study shows that the proposed precast concrete complex system is economical. Further research should be directed at including the influence of a term of works.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.40-45
• /
• 2001

The purposes of this study were mix design and quality control of high strength concrete for the construction of high rise complex structure. Desired performances of this high strength concrete were slump flow 50$\pm$10cm, air content 4.5$\pm$1.5% and design strength 400kgf/$cm^2$. Experimental flow was that optimal mix design was selected in the indoor experiment and after that, producing test was done in the batcher plant. Excel lent results of experiment was obtained from binder content 475kg/$m^2$ with replacement ratio 10% of fly ash. The results of field application of high strength concrete was sufficiently satisfied both flowability and compressive strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.79-83
• /
• 2005

In the reinforced concrete structure, Even if speak that water leakage occurrence is no problem to material, there is a lot of reasons construction factor, material damage by behavior structure, properties of matter change by years and water leakage part by environment condition. so, waterproofing technological consideration should be gone ahead. In this research, we will study about stick performance, concrete surface adhesive, damage and blow. we will check all things and test it. The stick expansion type complex of flexible material passed on result of standard. It is conducive to concrete of durability by waterproofing layer performance demobilitation technology on the water leakage structure for solution of problem and repair

• 패션비즈니스
• /
• 제12권3호
• /
• pp.116-135
• /
• 2008

To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer's dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.138-139
• /
• 2021

The MiDF Cement Composite is a high-performance construction material with low defects that dehydrates surplus water through pressurization and minimizes air gap between particles. In other words, the performance expression of the MiDF cement complex is affected by pressurized conditions. Thus, this study analyzed the physical characteristics of MiDF cement complex according to the power and pressure of the ga-power and the time of application and intends to use it as a basic data for optimal mixing.

• 한국건설관리학회논문집
• /
• 제15권4호
• /
• pp.95-106
• /
• 2014

비정형 건축물의 건설에서 가장 어려운 공정은 복잡한 디자인으로 이루어진 외장패널을 제작 및 시공하는 것이다. 설계자는 비정형 건물의 부드러운 곡면형태를 훼손하지 않는 범위 안에서 복잡한 곡면을 갖는 패널의 양을 축소하여 패널제작 및 시공비용을 최적화함이 필요하다. 특히 설계초기단계에서 다양한 건축외관을 디자인하고 각 설계대안의 예상공사비를 추정하면서 설계의도를 충족하는 적절한 대안을 찾는 것은 대단히 중요하다. 하지만 대부분의 설계사무소들은 비정형 건축물의 패널최적화에 대한 이해, 기술 및 데이터가 부족하여 초기설계 단계에서 예상공사비 산정, 설계 대안 비교를 통한 예상공사비 조정등의 업무를 효과적으로 수행하지 못하고 있는 실정이다. 본 연구는 비정형 건축물 설계자가 쉽게 접할 수 있는 범용 어플리케이션을 이용하여 비정형 건축물의 외장패널을 최적화하는 방법을 제시하며 최적화 결과와 국내 비정형 건설프로젝트의 외장공사에 대한 실적공사비를 접목하여 최적화 진행에 따른 공사비 변화정도를 산출하는 방법을 제시한다. 연구결과의 적용성을 검증하기 위해 국내에서 최근 완공된 비정형 건축프로젝트의 사례연구를 수행한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.35-36
• /
• 2011

Recently, an irregular-shaped super tall building has been increased, aiming toward landmarks of cityscape. However, the complex floor plan derived from an irregular shape requires considerable resources including time, cost, and effort to meet complex structural framework. Based on the motivation, the study proposes a table-form system that is variable slab form appropriate to an irregular shaped floor through improving limitations of an existing table-form system. The variable table-form is expected to reduce construction resources and improve constructability on an irregular floor plan of super tall buildings as well.