• International Journal of Costume and Fashion
• /
• v.3
• /
• pp.89-105
• /
• 2003

The purpose of this study is to classify sleeves that play an important role in upper-garment designs and that can be presented in diverse shapes by meaningful era. Also, characteristics and trends of sleeves are analyzed to provide a basis for development of design on modem woman's dress. To examine formation and construction of sleeves, literature review and empirical examination were conducted, focusing on patterns of woman's dress presented in literature. This study is to concentrate on the period, the Renaissance to the 19C. In this study, characteristics of sleeves are analyzed by each era according to its shapes and construction. By analyzing the shape of sleeves and the characteristics of the construction of sleeves, the following conclusions had been reached. 1) Sleeves evolved from single, draped garments into dimensional shapes which were manipulated to reflect the changing trends. Considering the comfort and ease of movement have always been very important in clothing design and the construction of sleeves throughout the ages has consistently been able to provide the comfort that wearer demanded. 2) Shape of sleeves varies a little in each period, but recurring trends in fashion led to similar design in sleeves being repeated. Also, instead of a dramatic change in the construction of sleeves, each period had its own unique technique to add freshness by using a variety of ornamentation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.67-70
• /
• 2007

As construction industry is requiring competitive power and technique in national construction market with rapid fluctuation of construction environment and development, requirements upgrading performance in construction materials are increasing. But, national lightweight aggregate and lightweight concrete's inappropriateness when produced are also increasing. And there are not international standard of aggregates in using these construction materials because standards and characteristics of aggregate in each countries are different. Therefore, in this study, lightweight aggregate acquired due to wide range of use is tested and mixed for concrete to gain practicality and set the authorized manual in international. Also, basic data will be proposed to set a standard for concrete by analyzing lightweight aggregate characteristics. When lightweight aggregate absorptivity is high, concrete shows low strength and when it's density is low, concrete shows low weight of unit volume. Furthermore, compressive strength of lightweight aggregate is steep in first and longtime material age is tendency to cause low strength increasing rate.

• Journal of Drive and Control
• /
• v.15 no.4
• /
• pp.81-90
• /
• 2018

Indoor construction site such as building demolition sites, tunnel, vinyl house, and cattle shed are subject to various risk factors such as falling stones, soot and bad odors. However, most of the mini excavators have no cabin that can protect the driver from such risk factors. Therefore, researches on remote control technology of construction equipment are actively conducted as a method for protecting the driver from the risk factors occurring in the working environment. For effective remote control, it is necessary to be able to control the travelling and work using a portable small transmitter. However, due to the limitation of the size of the transmitter, complex operation control is required to control two or more actuators with a single joystick. Also, it is essential to check how remote control characteristics change in various environments such as distance, signal strength, obstacle. Therefore, in this study, an algorithm that can control two actuators simultaneously with a single joystick signal was developed, and a communication method suitable for indoor and outdoor mini construction equipment by analyzing experimentally how the remote control characteristics vary according to various work environments and telecommunication methods proposed.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.406-420
• /
• 2014

The goal of this study is to support the children's pants construction methods that secure clothing size and fit appropriateness through proposed improvements of denim pants construction method focusing on 4-year-old boys. Depths interview on the actual condition, measurements and calculations for positions and ease of the clothing points corresponding to the body points actually worn were conducted for 47 denim pants of nine boys. "Characteristics of the areas worn" and "physical characteristics of lower body" were analyzed, and improvements of 4-year-old children's denim pants construction method were proposed. As the results, the different figures in "characteristics of the areas worn" between the existing children's pants construction methods and children's actual wearing habits were found, and identification of distinct children's lower body from adults' supports that we should avoid tracing adults' methods without reasons. Children's pants construction method on basis of actual wearing should be devised to solve fit problems. Improvements of children's method were proposed such as ease of girth by different area worn, ease of "elastic waist girth", the difference between "elastic waist girth" and "pattern waist girth", and the difference between "pattern waist girth" and "pattern hip girth" as considerations of pants girth items, and appropriate position "clothing waist girth" "pants hip length" level, "pants crotch length" level, "clothing knee length" level, and "pants outside length" level for pattern making as considerations of clothing length items.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.203-209
• /
• 2004

Construction work noise has caused much annoyance for a number of dwellers nearby construction field and has become a very serious issue in our living environment. Therefore, practical solutions for reducing construction work noise are highly required in construction field. Practical solutions for the construction work noise, however, are very difficult because of the poorness of basic data and research. Especially, in order to establish a sound insulation plan about pilings work noise that has highly sound pressure level and impactive, it is necessary to investigate the characteristics of construction noise such as pilings work noise, mechanical operating noise, etc. Accordingly, the aim of this study is to get the basic data about construction noise by SDA(Separated Doughnut Auger) method. And in this study, we attempt to survey the characteristics of attenuation and propagation of construction equipment noise and to estimate the power level in pilings work, using SDA method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.121-122
• /
• 2023

Existing modular research has been mainly focused on S (shelter structure) and I (infill interior finishing material), and considerable research has been conducted, and the results are being proposed. However, in the case of the rest (exterior materials and windows, etc.), existing construction methods and materials are borrowed, and supporting hardware members and insulation materials are constructed on site, which acts as a factor hindering overall shortening of the construction period. That is, since the advantages and characteristics of modularity cannot be utilized in the absence of modular cladding, manufacturing of cladding is required. Therefore, it is necessary to develop a cladding system that can drastically reduce the construction period in factories while considering the structural characteristics of PC modulars.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.1
• /
• pp.47-56
• /
• 2019

As the zero interest rate era was over with the end of quantitative easing, the economy of several global markets observed the fluctuations of the base interest rate. Interest rate, which is the change of money value with respect to time, is negatively correlated with construction investment. Considering the characteristics of interest rates and construction investment as economic variables, the necessity of cross-border analysis between base interest rate and construction investment was suggested in this paper. Cross-correlation analysis between base interest rates and construction investment crossing the border was performed. The effective correlations were confirmed with values varying by countries. Similar characteristics were also observed among countries with similar economy, which were then divided into three groups. Additionally, identifying the base interest rate that affects the construction investment of a particular country was made possible by reflecting a self-cycle of base interest rates. Lastly, from the result of examining the influence of each rise and fall of the interest rate, it was verified that the difference was more than twice as large in some countries. These results are expected to contribute to construction-related policy makers or investors to make decisions in response to the economic status of the construction market.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.3-11
• /
• 2023

To address the high accident rate in the construction industry, there is a growing interest in implementing virtual reality (VR)-based construction safety training. However, existing training approaches often failed to consider learners' individual characteristics, resulting in inadequate training for some individuals. This study aimed to investigate the impact of personal characteristics on learning performance in VR-based construction safety training using machine learning and SHAP (SHAPley Additional exPlanations). This study revealed that age exerted the greatest influence on learning performance, while work experience had the least impact. Furthermore, age exhibited a negative relationship with learning performance, indicating that the introduction of VR-based construction safety training can be effective for younger individuals. On the other hand, academic degree, qualifications, and work experience exhibited a positive relationship. To enhance learning performance for individuals with lower academic degree, it is necessary to provide content that is easier to understand. The lower qualifications and work experience have minimal impact on learning performance, so it is important to consider other learners' characteristics so as to provide appropriate educational content. This study confirmed that personal characteristics can significantly affect learning performance in VR-based construction safety training, highlighting the potential for leveraging these findings to provide effective safety training for construction workers.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.390-395
• /
• 2006

Recently, construction industry demands have been changed by domestic construction circumstances such as high-technology, mega-projects, and the complexity of construction. In order to deal with the change of such a domestic construction circumstances, the Ministry of Construction and Transportation (MOCT) has introduced advanced delivery methods (i..e, CM, DB, etc.). However, the advantages and disadvantages of the advanced delivery methods have not been effectively applied for previous projects. The reason for this is that the "Reviewing Standard for the Large-scale Construction Bidding Method" has not reflected enough project characteristics when the delivery method is selected in the project planning phase. Therefore, this paper proposes the model for selecting criteria of delivery method based on project characteristics in the Multi-housing projects.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.55-63
• /
• 2007

Deformational characteristics of subgrade soils are important properties in the mechanistic analysis and design of pavement system. In this study, to evaluate the effect of specimen construction methods on deformational characteristics of subgrade soils in Korea, resonant column tests were performed for specimens constructed by various methods. Specimen construction method affected to the modulus value but the variation in the normalized modulus reduction curve was almost identical. The effects of specimen construction method on modulus are decreased with increasing confining pressure. The average maximum variation in the modulus value with different specimen construction methods was estimated as 16.8%. The differences in the modulus value of the specimens with same water content and dry density conditions that made by gyratory compaction and impact compaction were very small within 5.2%. The impact compaction method was proposed as a specimen construction method for determining the design input parameter testing considering that impact compaction method is much simpler and require less expensive specimen construction equipment and setup than gyratory compaction method.