• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.15-16
• /
• 2015

Natural stone causes environmental pollution when it is collected and processed. Also, it is hard to make consistent products. Therefore, this study focuses on the artificial stone with waste porcelain to replace natural stone. The flexural strength and compressive strength are lower according to the replacement ratio of blast furnace slag in the result of experiment.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.122-122
• /
• 2005

The remediation for contaminated soil and groundwater in contaminated site and waste site has to be compact and economic in maintaining and operating the system. In this study, the atomized slag was tested if they are an effective reactive material in permeable reactive barrier This novel reactive system technology was applied to the treatment of leachate from unplanned waste landfill. The system was optimized and developed to be commercialized.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.10a
• /
• pp.69-74
• /
• 1992

The characteristics of the landfill of coal ash and ironwork wastes are investied by performing the basic geotechnical experiments and groundwater quality analyses in the landfills. The results show that the waste materials themselves have good characteristics that can be used as reclamation materials. However, landfills need either some ground improvement or costly foundation and excavation methods to be used as construction sites, because of the careless management during the period of waste disposal.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.89-90
• /
• 2023

This dissertation investigates the feasibility of accurately calculating the required rebar length using BIM-based shape codes and the potential benefits of such an approach in terms of cost reduction, waste reduction, and environmental improvement. The study aims to explore the possibility of automatically calculating slab rebar length before construction to reduce rebar cutting waste and cost. The results of this study will provide insights into the potential of using shape codes to reduce rebar cutting waste and cost in building frame construction.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.113-120
• /
• 2012

This study was conducted basic research for introduction plan of building dismantlement to reduce construction waste fundamentally and efficiently. The current domestic and overseas legislations relation with dismantlement were compared. In addition, the difference of construction waste treatment and pure demolition cost that were applied to dismantlement and general deconstruction method in building were compared. The total cost that was estimated to apply dismantlement in building was higher about 6% than that of general deconstruction.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2019.05a
• /
• pp.185-186
• /
• 2019

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.420-421
• /
• 2018

• New & Renewable Energy
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2022

Landfill gas (LFG) generation characteristics in a construction waste landfill zone (block E) and mixed landfill zone (block A) were analyzed. During the period from October 2018 to April 2022, a total of 936×10³ and 1,001×10³ tons of waste were disposed in block E and block A, respectively. Out of this, 27.1% and 55.6% were biodegradable waste in block E and block A, respectively. The landfill masses of the two blocks were converted to be comparable. Then, the biodegradable waste and organic carbon were estimated by element analysis, biodegradable carbon by biochemical methane potential experiment (DC), and sulfate ion by acid decomposition. Results showed that biodegradable waste, organic carbon, biodegradable carbon, and sulfate ions in block A were 2.1, 1.6, 5.2, and 0.4 times greater than those in block E, respectively. The amount of LFG generated by block A was 4.8 times greater than that by block E. The average concentrations of methane (CH₄) were 60.8% and 60.9% in block E and block A, respectively, which were unrelated to the nature of disposed waste. The average concentrations of hydrogen sulfide (H₂S) were significantly high in block E (4,489 ppm) and block A (8,478 ppm). As the DC/SO₄^2- of block E and block A were 0.35 and 4.56, respectively, increase in DC/SO₄^2- caused increase in not only the total amount but also the concentration of H₂S generated.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.111-119
• /
• 2011

Recently, urban redevelopment programs and expansion of social infrastructure have caused massive amounts of construction waste in construction fields, and the mounds of it keep increasing every year. The disposal of construction waste is emerging as a national and social issue and the recycled powder generated by the treatment process of waste concrete is all being abolished or buried. Therefore, the purpose of this study is to utilize waste sludge generated by the wet-type treatment process of waste concrete as materials(binder, filler) for cement composite. This study evaluates physical and mechanical properties of mortar using recycled powder according to heating temperature, contents and applications. As a result of the chemical analysis, recycled powder is composed mainly of CaO and $SiO_2$, and that it is even lower in the content of CaO than OPC. The charateristics of mortar using recycled powder, according to drying and heating temperature, shows that as the heating temperature increases, flow decreases. Also, compressive strength and porosity of mortar using recycled powder was superior when heating temperature was $600^{\circ}C$. Thus, it is revealed that an effective development of recycled powder is possible since the binder by cement composite recovers a hydraulic property during heating at $600^{\circ}C$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.607-614
• /
• 2012

The importance of demolition industry is becoming lager because of reusing and recycling of construction waste in current trend to pursue for sustainable development. As considering situation of the domestic housing construction and existing house, a scale of demolition industry is expecting to be increased continually. Therefore, for sustainable development is needed forecasting and managing rightly demolition waste to be producted at demolition phase. But, The development of model for estimating demolition waste is not sufficient in the country, also, the development of computer system for managing it rightly has not yet been created. In this study developed the estimating waste units for estimating demolition waste of an apartment and a house. A regression model for quantifying demolition waste easily is developed to do simulation again after making the estimating waste units through analyzing draws. This model is developed as a computer system for increasing application and then verified the reliability through field application. this regression model can quantify a sort of 22 demolition waste easily based on the size of the floor area and a number of units. This system is expected to quantify demolition waste easily which is producted during redevelopment and remodeling of existing house.