• Environmental Engineering Research
• /
• v.16 no.3
• /
• pp.131-136
• /
• 2011

The degradation of 30 pharmaceuticals and personal care products (PPCPs) subjected to $O_3$, $O_3$/UV, and $O_3/H_2O_2$ treatments were investigated using semi-batch tests and evaluated by their pseudo-first-order rate constants. The additional application of UV or $H_2O_2$ during $O_3$ treatment significantly improved the degradation rate of most of the PPCPs. At the same $O_3$ feed rate, $O_3$/UV treatment exhibited much higher PPCP degradation efficiency than that of $O_3$ treatment. This was probably due to degradation of the PPCPs by $O_3$, direct UV photodegradation, and OH radicals that formed from the photodegradation of $O_3$ during $O_3$/UV treatment. PPCP degradation by $O_3$ was also promoted by adding $H_2O_2$ during the $O_3$ treatment. However, when the initial $H_2O_2$ concentration was high during $O_3$ treatment, OH radicals were likely to be scavenged by excess $H_2O_2$, leading to low PPCP degradation. Therefore, it is important to determine the appropriate $H_2O_2$ dosage during $O_3$ treatment to improve PPCP degradation when adding $H_2O_2$ during $O_3$ treatment.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.5
• /
• pp.43-52
• /
• 2018

Generally, research on construction cost has been done mostly regarding its direct cost, thus model regarding indirect cost lacks attention. This research seeks to introduce a model to predict on-site overhead cost for apartment construction projects, which constitutes a big portion in Korean construction industry. We devised an equation of 9th degree via curve-fitting, using multiple on-site actual expense data, which can be used to calculate per-progress rate, per-day on-site overhead cost. We further show prospective usage of the model by applying it on construction projects sizing about 30 billion won. Regarding the fact that previous studies could not recognize pattern changes of a total on-site overhead cost, this model is worthy of its conveniency and thoroughness, as well as providing reasonal ground for its derivation in predicting on-site overhead cost of apartment construction projects.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.366-369
• /
• 2004

Construction demands will become high. Defects liability is treating with a consumer on a defect. Maintenance bond is overlooking excessive responsibility of construction industry participants. This study classified the problem that are divided to systematic and internal matter. And this study presented an improvement proposal. An improvement proposal of a process may reduce a financial burden of contractors and sub-contractors. And improved rate decision will do additional consideration of the study result, so that it is appropriated a rate rationally.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.398-403
• /
• 2009

The theoretical bases on characteristics of heat release rate in compartment of building for scenario of smoke management are introduced and the numerical applications to simple compartment model are carried out. The growth stage which is important for smoke management design is modelled as t-squared fire curve including fire growth coefficient with related to growth rate. The conditions for the happening of flashover is presented such as $600^{\circ}C$ of temperature or $20kW/m^2$ of radiation heat flux. After the flashover happen, the fire in compartment changes to fully developed fire having the characteristics of ventilation-controlled fire. As the result of numerical analysis to simple compartment model, the time to reach 900K under ceiling for condition of medium growth is twice for condition of fast growth.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.3
• /
• pp.28-37
• /
• 2011

Domestic construction companies are suffering from financing difficulties in the wake of the economic slump in Korea and abroad. During this economic slump, real estate investment trusts (REITs), facilitators for improving financing and stimulating construction businesses, have increasingly expanded since their introduction in 2001. However, in terms of growth speed and marketing size, Korean REITs are falling behind those of other nations. The purpose of this study is to suggest a method for composing a portfolio using the Markowitz portfolio selection model to stimulate REITs. The main contents are as follows. First, a comparative analysis was conducted of increased REIT profit with the application of the Markowitz model and the average REIT profit rate from July 3, 2007, to July 21, 2008, during the investment analysis periods. The results showed that the total profit rate from the Markowitz model was about 10% higher than the average REIT profit rate. Second, the sensitivity was analyzed according to the portfolio's data-gathering and replacement cycle to measure the optimum cycle and yield. The six-mouth profit data collection period showed about 16% higher profits with the Markowitz model than with the REITs. The two-week portfolio change period resulted in about 11% higher profits with the Markowitz model than with the REITs.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.123-132
• /
• 2023

In disaster situations, to facilitate rapid drainage, electric underwater pumps are installed manually. This poses a high risk of electric shock accidents due to a short circuit, and a lot of time is required for hose connection and installation of electrical devices. To solve these problems, a Venturi pump using the venturi effect without external power is used. However, Venturi pumps that operate without external power make it difficult to install flow sensors such as electric devices; consequently, it is difficult to check the real-time flow rate. This paper proposes a flow estimation logic to replace the function of the flow sensor for the venturi pump . To develop the flow estimation logic, the flow characteristics of the venturi pump, according to the operating conditions, were checked. After that, the relationship with the flow rate of the venturi pump was defined using a pressure sensor corresponding to a low-cost sensor. Finally, an analysis of the estimation error was performed using the developed flow estimation logic.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1055-1060
• /
• 2009

Noise is one of the major environmental problems in human life. But hot water distributers with the flow rate control valve bring about often noise according to the heating control condition in residential buildings. The sound power level increased as the flow rate and pressure difference increased. And thus, experimental analyses for the flow rate control and the pressure difference control were carried out in this study to reduce the noise emitted from the flow rate control valve. As the results, the flow rate control method using a SMA(Shape Memory Alloy)-valve and the flow rate control system using a pressure difference sensor can be expected to control noise in the region of below 50 dB of sound power level.

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.96-104
• /
• 2012

The objective of this study is to compare on the occupational injury rate and mortality rate of all workers and foreign workers. By doing so, this study seeks to find out the improvements necessary to secure the basic safety net for foreign workers, as well as to find out the legal and institutional measures in place to make timely political intervention and protect the health of foreign workers. The status of foreign workers in Korea, their employment trends by industries, and occupational accident types and scales of Korean and foreign workers were analyzed from 2005 to 2009. Each year, foreign workers' occupational injury rate was much lower than Korea's overall occupational injury rate. But when analyzed by industry, occupational injury rate (death rate per 10,000 workers) of manufacturing industry was about 2 to 5 times higher than the overall occupational injury rate in Korea. Also, construction industry showed 3 to 16 times higher rate than the rate of overall industries. Although the death rate per 10,000 workers showed a declining yearly trend, foreign workers' occupational injury rate has the tendency to increase gradually. In particular, occupational injury rates and death rates per 10,000 workers were considerably high in the manufacturing and construction industries.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.86-93
• /
• 2021

In order to remove particulate matter, functional construction materials are developed. However, there is no evaluation method and infrastructure for particulate matter removal rate. Therefore, the purpose of this study was to build a particulate matter removal rate test chamber and to present a method for particulate matter removal rate. As a result, since construction materials have effectiveness in an environment where particulate matter is generated, the particulate matter injection step was proposed as a comparison target. The evaluation of the particulate removal rate was proposed by relative comparison of the slope values obtained by linear regression analysis for all concentration values measured in the particulate matter injection step. In linear regression method, all measured values can be evaluated, and the variability can be evaluated with the coefficient of determination (R-square), so that the reliability of the particulate matter removal rate can be secured.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.281-287
• /
• 2020

In capital budgeting practices, investment project evaluations based on the net present value (NPV) and the internal rate of return (IRR) represent the traditional evaluation techniques. Compared with the traditional methods, the modified internal rate of return (MIRR) gives the opportunity to evaluate an investment in certain projet, while taking the changes in cash flows over time and issuing shares such as dividing shares, bonuses, and dividend for each end of the investment year into account. Therefore, this study aims to evaluate an investment in the Malaysian construction sector utilizing financial data for 39 public listed companies operating in the Malaysian construction sector over the period from Jan 1, 2007, to December 30, 2018, based on the MIRR method. Stochastic was studied in this study to estimate the estimated probability by applying the Markov chain model to the MIRR method where the transition matrix has two possible movements of either Good (G) or Bad (B). it is found that the long-run probability of getting a good investment is higher than the probability of getting a bad investment in the long-run, where were the probabilities of good and bad are 0.5119, 0.4881, respectively. Hence, investment in the Malaysian construction sector is recommended.