• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.76-80
• /
• 1998

In order to identify the cause of ground water drawdown of a piezometer installed around the LPG storage cavern, parameter estimations were conducted by inverse and forward numerical models. An inverse model, SK-EST developed by SK Engineering & Construction Co., Ltd.(SKEC,1997) was performed to estimate the change of the hydraulic conductivity. It was verified by the commercial forward model, AQUA3D (VATNASKIL,1995). The simulation results showed that the hydraulic diffusivity of the rock mass between the piezometer and the cavern had been increased and the change rate of the hydraulic head had been abruptly increased in response to the change of the operation pressure. Finally the statistical analysis for observed data showed the increase of the change rate of the hydraulic head and thus proved the applicability of SK-EST.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.4
• /
• pp.230-241
• /
• 2020

Since the construction of Pohang New Port, the problems of the low harbor tranquility caused by decreasing port operation rate has been continuously reported. In order to improve the harbor tranquility, a detached breakwater (DB) has been constructed outside the outer breakwater of Pohang New Port in 2018~2020. In this study, the effectiveness of the DB was proved by comparing the reduction rates of wave heights that were observed before and after the construction of the DB. First, the observed data were compared with the numerical model results available from a previous study, and the model data showed reasonable agreement with measured data at 3 out of 4 locations inside the port. The discrepancy in one of the locations was because the model could not accurately calculated the effect of wave interference in the inner corner of the port. The observation data showed excellent results that the number of waves that exceeded 0.3 m, the critical value to reach desired harbor tranquility, was significantly reduced after the construction of the DB. In addition, the reduction rate, the ratio of wave heights between outside and inside of the port, was decreased after the DB construction, which proved that properly designed coastal structures such as DB in this study could be effective in improving the port tranquility. The results of this study can be usefully applied for solving problems in similar cases.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.503-510
• /
• 2019

Recently, construction technology of RC structures must be examined for creep in concrete. The factors affecting the creep prediction of concrete and the results of creep in domestic construction field were reviewed. The longer the creep test period and the higher the compressive strength, the higher the creep prediction accuracy. The higher the curing temperature, the higher the initial strength development of the concrete, but the difference in the creep coefficients increased over time. Based on the results of creep evaluation in the domestic construction field and lab. tests, a modified predictive model that complements the ACI-209 model was proposed. In the creep prediction of real members using general to high strength concrete, the test period and temperature should be considered precisely.

• Journal of Technology Innovation
• /
• v.19 no.3
• /
• pp.57-83
• /
• 2011

We suggested industry-specific priorities of R&D investment with R&D investment elasticity to GDP calculated from the ripple effect of 28 large-sized industry R&D investment, using a Computable General Equilibrium(CGE) Model. Priority orders apply to only 12 industries, because 16 industries with less than 1% of total investment have been excluded. First, R&D investment elasticity to GDP says that priorities are ordered as Basic metal products, Chemicals, drugs and medicines, Food, beverages and tobacco products, Electronic and electrical equipment, Transportation equipment, Precision instruments, Electrictity, gas, steam and water supply, General machinery and equipment, Communications and broadcasting, Construction, Other services, and Real estate and business services. These priorities show the status quo of Korean industry structures well. The GDP growth rate to 2030 year reference equilibrium, which is an auxiliary index, says a similar priority to results from R&D investment elasticity to GDP. In the end, two criteria of priority order can be functioned as a good index for National Science and Technology Commission deciding what industry to invest and what budget to allocate.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1275-1282
• /
• 2009

The tunnel excavations are used for construction of common utility tunnel, electric tunnel, communication line tunnel, water supply and public sewerage pile line in urban area. The trench cut methods were mainly used in the past, but now, tunneling method is more being used. The tunnel excavation method like as NATM, Messer-Shield, Semi-Shield Methods are being applied to small section tunnel in Korea. The actual construction results of seme-shield method are increasing due to simplified construction process and reduced noise and vibration. And also this method is being used frequently in waterway tunnel and construction of prevention flooding recently. The seme-shield method design guideline is absence except for electric line tunnel construction in Korea, because of the semi-shield method was developed in Europe and Japan. In the prescriptive design, engineer's subjects are tending to intervene, because of absence of standard and specification for details. Therefore, Design and Construction Problems of Semi-Shield Method were described and construction trouble was introduced for exam. These problem and construction troubles have to be examined thoroughly in advance.

• Journal of KIBIM
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2022

Concrete formwork is a crucial component for any construction project. Artificial intelligence offers great potential to automate formwork design by offering various design options and under different criteria depending on the requirements. This study applied image segmentation in 2D formwork drawings to extract sheathing, strut and pipe support formwork elements. The proposed artificial intelligence model can recognize, classify, and extract formwork elements from 2D CAD drawing image and training and test results confirmed the model performed very well at formwork element recognition with average precision and recall better than 80%. Recognition systems for each formwork element can be implemented later to generate 3D BIM models.

• Journal of Distribution Science
• /
• v.17 no.2
• /
• pp.53-69
• /
• 2019

Purpose - National scientific technology R&D investment is exceeding 60 trillion won per year, and the results of patent applications and technology transfers are visually improving. However, despite the improving research results of national R&D, the practical results of technology startups are mediocre. It is now time to expand the construction of the technology commercialization ecosystem, where the expansion of national R&D leads to the results of technology startups. Therefore, this study discussed the measures to increase the competitiveness of technology startups through the factual survey of the companies that benefitted from R&D support programs. Research design, data, and methodology - This study targeted 996 companies that benefitted from the R&D projects of the Technology Transfer Center for National R&D Programs, and deducted itemized issues through the survey replies. Survey questions were prepared to estimate the national R&D results, and the technology recognition path, the purpose of detailed introduction of the technology, investment of the commercialization fund, economic results, and the factors of success and failure were analyzed. Results - As for the recognition rate of technology during the process of corporate technology commercialization through the technology transfer, recognition through project participation showed a high response rate, and diverse implications of technology commercialization were deducted through the analysis of economic results. As for the resolution alternatives, the proliferation of technology commercialization platform that can create excellent technology for the companies in early stages and the measure of expanding the distribution of technology infrastructure were suggested. In this study, public technology commercialization strategy is established, and the innovative marketing strategy is presented. Conclusions - This study reveal that the result of creating scientific technology jobs should be deducted, in order to produce the revolutionary results of job creation by suggesting the success models of technology commercialization based on domestic scientific technology. In particular, even though the support systems for public research results are being diversely suggested, accurate studies on their actual conditions are currently lacking. Therefore, this study suggest realistic political alternatives to assure results in the process of public technology commercialization, by examining the current state of public research results of R&D support institutions and diagnosing the issues.

• 한국가스학회:학술대회논문집
• /
• 2004.11a
• /
• pp.82-87
• /
• 2004

Compression ring is a part of LNG storage tank. The main function of the compression ring is connected the roof plate with concrete side wall. End of its one side is embedded in the side concrete wall and the other's connected with the roof plate by welding. It is designed to support stably for all the loads such as self weight of steel roof, inner pressure and concrete weight. We fulfill the FEM analysis to analysis the compression ring behavior during construction. Also we studied the effect of the change of design variables. On the basis of the results, we could introduce a more reasonable design method for compression ring.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.265-267
• /
• 2000

The RMU is a power apparatus which is used in loop network distribution system. This paper considers the development of the hybrid interrupter in RMU which adopts both rotating arc and thermal expansion technology. Because of the operating principle of this device, it has some merit, compared with other interrupter. In this research, the geometric construction of the interrupting techniques are given and experimental results of hybrid interrupter which is developed by new technology is introduced.

• Journal of Korean Society for Quality Management
• /
• v.41 no.1
• /
• pp.149-162
• /
• 2013

Purpose: The purpose of this study was to design of a probabilistic model for optimum manpower planning in R&D department by Montecarlo simulation. Methods: We investigate the process and the requirement of manpower planning and scheduling in R&D department. The empirical distributions of necessary time and manpower for R&D projects are developed. From the empirical distributions, we can estimate a probability distribution of optimum manpower in R&D department. A simulation method of estimating the probability distribution of optimum manpower is considered. It is a useful tool for obtaining the sum, the variance and other statistics of the distributions. Results: The real industry cases are given and the properties of the model are investigated by Montecarlo Simulation. we apply the model to the research laboratory of the global company, and investigate and compensate the weak points of the model. Conclusion: The proposed model provides various and correct information such as average, variance, percentile, minimum, maximum and so on. A decision maker of a company can easily develop the future plan and the task of researchers may be allocated properly. we expect that the productivity can be improved by this study. The results of this study can be also applied to other areas including shipbuilding, construction, and consulting areas.