• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.10-18
• /
• 2016

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements to mechanize routine agricultural tasks. When the FEL is used with a loaded bucket, careful operation is required to maintain safety and avoid spillage when the tractor passes a bump because a change in the gravity center of the tractor due to varied loadings can affect the stability of the tractor. Use of a boom suspension system consisting of accumulators and orifice dampers can be instrumental in reducing pitching vibrations while increasing the handling performance of the FEL-mounted tractor. The objective of this research was to reduce bump shocks by adding an orifice and a flow control valve to the original hydraulic circuit composed solely of accumulators. A simulation study was performed using the SimulationX program to investigate the effects of an accumulator and an orifice-throttle damper on bump shocks. Results showed that the peak pressure on a boom cylinder and the vertical acceleration of a bucket were significantly affected by use of both an accumulator and an orifice damper. In a field test conducted with a 75-kW tractor, the peak pressure of the boom cylinder, and the root mean square (RMS) vertical acceleration of the bucket and seat were reduced by on average, 23.0, 42.2, and 44.9% respectively, as compared to those measured with the original accumulator system, showing that an improved design for the accumulator hydraulic circuit can reduce bump shocks. Further studies are needed to design a tractor suspension system that includes the effects of cabin suspension and tires as well as dynamic analysis.

• Journal of Science and Technology Studies
• /
• v.15 no.2
• /
• pp.191-227
• /
• 2015

The supply-driven innovation system is encountering its limitation. At the same time, the needs for solving societal challenges occurring in people's lives are growing. Social problem-solving R&D programs have been attracting attention as a countermeasure to satisfy these needs. It is important to understand the social context of the occurring problems as well as the users facing the social challenges. Therefore, social problem-solving R&D programs have to explore the social challenge and users' needs, with emphasis on the collaboration with researchers and users in the development and implementation process. This study carries out comparative analysis between 'Korean Citizen-driven R&D project' and 'Japanese Research institute of Science and Technology for Society (RISTEX)' concerning goals, construction of program, and promotion processes. The two cases are similar regarding the objectives of social problem-solving and the strategy for user participation. However, there are differences between the characteristics of the projects and promotion processes. The RISTEX is performing social problem-solving R&D with a much wider perspectives than the Korean project. This is because the Korean project maintained the existing R&D system with the lens of the supply-driven system, even when approaching social problem-solving. Therefore, this limitation should be overcome by adopting support systems discarding the supply-driven perspective, through substantiality of user participation, maintenance of legal system, and commercialization of technologies.

• Journal of The Korean Association For Science Education
• /
• v.39 no.3
• /
• pp.337-348
• /
• 2019

The purpose of this study is to examine epistemic thinking in middle school students in an argument-based inquiry science class. Participants of the study were 93 9th grade students from four classes of a middle school in a metropolitan city. Observations were made over one semester during which argument-based inquiry lessons on five subjects were conducted. Data was collected from argument-based inquiry activity worksheets and student questionnaires. After analysis of epistemic thinking in the written reflections, students were found to have the highest frequency of epistemic metacognitive skills, followed by epistemic cognition, epistemic metacognitive experience, and epistemic metacognitive knowledge. While investigating the effects of an argument-based inquiry science class on student epistemic thinking and after analysis of the reflections written for the first ABI activity and the fifth ABI activity, we found that all of the sub-elements of epistemic thinking have increased. The rate of growth for epistemic cognition is greatest, followed by epistemic metacognitive knowledge and epistemic metacognitive skills. Assessed for epistemic thinking, the level of epistemic thinking improved over the course of the argument-based inquiry science class. The results of the survey show that students actively participating and being recognized for their active participation in the argument-based inquiry science class are helpful in understanding scientific knowledge. Therefore, an argument-based inquiry science class is a teaching and learning program that allows students to understand and experience the epistemic nature of scientific knowledge and its construction through collaboration and agreement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.1
• /
• pp.29-42
• /
• 2019

In order to expand the qualitative aspects of public facility, this study used SNS data to derive user-oriented preference factors for public facilities and then were quantified in terms of supply side and demand side. To derive preference factor, LDA, one of topic modeling, was used and attraction index was calculated for each facility. In addition we analyzed spatial accessibility to measure the degree of service experience of users by using 2SFCA model. The study area covered public libraries of Seoul, Korea. As a result of study, five topics were extracted as preference factors for the public library: Circumstance, Scale of facility, Cultural program, Parenting, Books and materials. In particular topic of circumstance and parenting were newly derived preference factors unknown in previous studies. As a result of calculating attraction index for each library, the index of Songpa Library, Jungdok Library, and Namsan Library was high. Songpa library has received good evaluation in parenting factor, and Jungdok & Namsan library in circumstance factor. The accessibility of each region seems to better in center of Seoul where public libraries are crowded, but shrinking toward the outskirts. We expect that the proposed method will contribute to user-oriented public facility evaluation and policy decision making.

• Korea Science and Art Forum
• /
• v.37 no.3
• /
• pp.135-145
• /
• 2019

IFC(Industry Foundation Classes) is used for information exchange in BIM-based collaboration process, and it does not secure reliability of information exchange results between fields due to structural limitations. In the end, it is a realistic problem that we have to use specialized BIM software by field, and we can not secure smooth interoperability in the process of information exchange and change. This study was conducted to find ways to secure the interoperability of BIM work between architecture and structure fields by utilizing Open Source provided by software developers to solve these problems. First, through expert survey and in-depth interview, information and improvement factors required in the process of collaboration between architecture and structure were derived. Second, in order to find a solution to the improvement factors, existing studies related to Open-API and domestic and overseas APIs were investigated and analyzed. Third, Ad-On was developed to secure interoperability by using Open API, mainly BIM S/W, which is mainly used in each field. As a result of the study, the possibility of securing interoperability through the management of the design change history between fields was confirmed by using API. It is judged that the application range of API will be expanded to the construction and maintenance field in the future. Therefore, in order to increase the usability for application diffusion, further research on interface improvement through user-centered verification is needed.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.12
• /
• pp.21-30
• /
• 2011

The recycled soil that is proceeded from demolition concrete structures was analyzed by the methods of the physical and mechanical tests of soil and TCLP test to use the soil in low landfilling for the construction of an industrial complex. The laboratory test for diffusion of alkali ion in soil mass was analyzed by the methods of XRF and ICP. The fish toxicity test was also conducted to find an environmental influence. The recycled soil through the laboratory test satisfied the engineering property for low landfilling and the criteria of soil contamination. However, the solution which producted by 1:1 ratio of recycled soil and water contained the high pH concentration by alkali ion. The calcium hydroxide solution by CSH cement paste was estimated as the main reason why pH concentration is increased more than 9.0. The high pH concentration in recycled soils causes a toxicity to the livability of fishes. A diffusion area of pH concentration in the ground was analyzed by the Visual Modflow Ver. 2009 program based on geotechnical investigation. The high pH concentration in the recycled soils can be remained as high value due to cement paste in the long term period. Therefore, in the early stage of landfilling work, the mixing with the weathered granite soil is necessary to control the pH concentration.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.3
• /
• pp.17-26
• /
• 2003

Recently, as the internet is widespread rapidly among the public, people can use a variety of useful information services through the internet. Accordingly, the protection of information supplied by computer networks 5 has become a matter of primary concern on the whole world. To accede to the realistic demands, it has been worked out some countermeasures to cultivate the experts in information security by the government and many educational facilities. Already the government authority has carried out the each kinds of concerning projects under the framed a policy, Five-Year Development Plan for Information Security Technology. Also, many domestic universities perceives such an international trend, and so they frame their plans to train for the experts in this field, including to found a department with respect to the information security. They are ready to execute their tangible works, such as establishment of educational goal, development of teaching materials, planning curriculum, construction of laboratories and ensuring instructors. Moreover, such universities lead to their students who want to be information security experts to get the fundamental knowledge to lay the foundation for acquiring the information security technology in their bachelor course. In this note, we survey and analyze the curricula of newly-established or member-extended departments with respect to information security fields of some leading universities in the inside and outside of the country, and in conclusion, we propose the effective model of curriculum and educational goal to train the students for the information security experts.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.529-537
• /
• 2021

Membrane-type hull and cargo holds have been designed and built for large ship. However, there is a growing interest in applying the same technology to small and medium-sized Liquefied natural gas(LNG) carriers to meet the recent increase in demand for LNG as an ecofriendly fuel and for expanding LNG bunkering infrastructure. The purpose of this study is to apply the IMO Type-B tank to small and medium-sized LNG carriers and verify the safety and suitability of the design. Fatigue crack propagation analysis was performed to install a partial second drip tray installed at the lower part of the LNG cargo tank by calculating the amount of leaked gas in the support structure supporting the cargo tank. First, a program for fatigue crack propagation analysis was developed, in which Paris' law and British Standard 7910 (BS 79110) were applied based on the International Code for the Construction of Equipment and Ships Carrying Liquefied Gases in Bulk, an international standard for LNG carriers. In addition, a surface crack propagation analysis was performed. Next, a methodology for assuming the initial through-crack size was developed to determine the size of the partial second barrier. The analysis was performed for 15 days, which is a possible return time after cracks are detected. Finally, the safety and suitability of the IMO Type-B for LNG cargo tanks required by international regulations were verified. For the accurate analysis of fatigue crack propagation, it is necessary to develop and verify the analysis procedure based on direct analysis and international regulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.200-210
• /
• 2020

The maintenance of educational facilities was assembled in 12 project classifications of the Educational Improvement Program. The priorities were decided by the evaluation scores derived from the condition investigation, and maintenance works were budgeted in the order of priorities. These priorities were a schedule for conducting maintenance and an important criterion for obtaining a construction order. Several restrictions in the condition investigation exist, which derives budgets and conducts maintenance separately based on the priorities. An educational facility manager has a restriction in quantity take-off, which results in an incorrect budget. Discomfort would occur in an educational environment, and a period of infringing safety would increase. This study proposes applying a BIM in the condition investigation and the planning framework for work-type packaging. A BIM supports a budget calculation and derives evaluation scores by linking a repair and an inspection result. The work-type packaging algorithm divides a budget allocation range and derives the result of a grouped work-types applied in an equivalent space and element. As a result of applying cases, it could shorten the duration by approximately 37.4%. Its usability in selecting a grouped work-type was evaluated through an assessment with workers.

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.607-617
• /
• 2020

Human bio-monitoring (HBM) data is a very important resource for tracking total exposure and concentrations of a parent chemical or its metabolites in human biomarkers. However, until now, it was difficult to execute the integration of different types of HBM data due to incompatibility problems caused by gaps in study design, chemical description and coding system between different sources in Korea. In this study, we presented a standardized code system and HBM knowledge model (KM) based on relational database modeling methodology. For this purpose, we used 11 raw datasets collected from the Ministry of Food and Drug Safety (MFDS) between 2006 and 2018. We then constructed the HBM database (DB) using a total of 205,491 concentration-related data points for 18,870 participants and 86 chemicals. In addition, we developed a summary report-type statistical analysis program to verify the inputted HBM datasets. This study will contribute to promoting the sustainable creation and versatile utilization of big-data for HBM results at the MFDS.