• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.41-43
• /
• 2005

PDA-based monitoring is used to acquire continuously the patient's vital signs, including electrocardiography, activity, heart rate and $SpO_2$. In this paper, A biomedical signal acquisition device was designed using 3-axial MEMS accelerometer and 1-ch ECG amplifier, to have the function of monitoring activity and electrocardiography. The proposed system is composed of transmitter and receiver. Through the Zigbee communication, subject's biosignals can be transmitted in real-time to receiver, and transmitted data confirmed using PDA. The packet size used in this device was set not to exceed a maximum payload size of 116 byte. One packet consists of two segments. The transmission speed was 21 packet per second, 420 ECG samples per second, and 42 acceleration samples per second. The proposed method can be used to develop Activities of Daily Living(ADL} monitoring devices for the elderly or movement impaired people and enables patients to be monitored without any constraints. Also, this method will reduce medical costs in the aged society.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.80-89
• /
• 2013

This paper presents an efficient approach for solving economic dispatch (ED) problems with nonconvex cost functions using a 'Mean-Variance Optimization (MVO)' algorithm with Kuhn-Tucker condition and swap process. The aim of the ED problem, one of the most important activities in power system operation and planning, is to determine the optimal combination of power outputs of all generating units so as to meet the required load demand at minimum operating cost while satisfying system equality and inequality constraints. This paper applies Kuhn-Tucker condition and swap process to a MVO algorithm to improve a global minimum searching capability. The proposed MVO is applied to three different nonconvex ED problems with valve-point effects, prohibited operating zones, transmission network losses, and multi-fuels with valve-point effects. Additionally, it is applied to the large-scale power system of Korea. The results are compared with those of the state-of-the-art methods as well.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.2
• /
• pp.92-99
• /
• 2022

Due to space and geographical constraints, the power source may be located outside the island area, resulting in the considerable length of transmission line. In these cases, when an active power is transmitted, unexpected reactive power is generated at a point of common coupling (PCC). Unlike the power transmitted from the power generation source, the reactive power adversely affects the system. This study proposes a new algorithm that controls reactive power at PCC. Causes of reactive power errors are separated into parallel and series components, which allows the algorithm to compensate the reactive current of the inverter output and control reactive power at the PCC through calculations from the impedance, voltage, and current. The proposed algorithm has economic advantages by controlling the reactive power with the inverter of the power source itself, and can flexibly control power against voltage and output variations. Through the simulation, the algorithm was verified by implementing a power source of 3 [kVA] capacity connected to the low voltage system and of 5 [MVA] capacity connected to the extra-high voltage system. Furthermore, a power source of 3 [kVA] capacity inverter is configured and connected to a mock grid, then confirmed through experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.199-205
• /
• 2000

The vibration and noise of gears is due to the vibration exciting force caused by the tooth stiffness which changes periodically as the mesh of teeth proceeds and by the transmission error, that is, the rotation delay between driving gear and driven gear caused by manufacturing error and alignment error in assembly and so on. The purpose of this study is to develop how to calculate simultaneously the optimum amounts of tooth profile modification, end relief and crowning by minimizing the vibration exciting force of helical gears. We estimate the vibration exciting force by the mesh analysis of gears. The constraints of this problem consist of contact ratio and strengths of gear teeth such as tooth fillet stress, surface durability and scoring. ADS(Automated Design Synthesis) is used as an optimization tool. And, since the aspect ratio is an important parameter of tooth modification, we investigate the relation between it and the optimum values of tooth modification. The proposed method can calculate the optimum amount of tooth modification automatically and is to be utilized to resolve the problem of vibration of helical gears.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1495-1502
• /
• 2020

A new method of X-ray source spectrum estimation based on compressed sensing is proposed in this paper. The algorithm K-SVD is applied for sparse representation. Nonnegative constraints are added by modifying the L₁ reconstruction algorithm proposed by Rosset and Zhu. The estimation method is demonstrated on simulated spectra typical of mammography and CT. X-ray spectra are simulated with the Monte Carlo code Geant4. The proposed method is successfully applied to highly ill conditioned and under determined estimation problems with a good performance of suppressing noises. Results with acceptable accuracies (MSE < 5%) can be obtained with 10% Gaussian white noises added to the simulated experimental data. The biggest difference between the proposed method and the existing methods is that multiple prior knowledge of X-ray spectra can be included in one dictionary, which is meaningful for obtaining the true X-ray spectrum from the measurements.

• Journal of Broadcast Engineering
• /
• v.6 no.2
• /
• pp.148-159
• /
• 2001

This paper presents a selective duality control system to control relative picture quality among the video programs in terms of Peak Signal-to-Noise Ratio (PSNR) . The selective quality control system allows variable bit rate (VBR) for each video program to maintain the pre-determitted relative picture Quality among aggregated video programs while keeping a constant bit rate for alt programs to be transmitted over a single constant bit rate (CBR) channel. Thus is achieved by simultaneous controlling the video encoders to generate VBR video streams at the central controller. furthermore, we also suggest a buffer regulation method based on the analysis of the constraints Imposed by sender/receiver buffer sizes and the total transmission rate. Through various simulation results, it is found that the proposed quality control system guarantees that the video buffers neither overflow nor underflow and the quality control errors do not exceed 0.1 dB.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1153-1162
• /
• 2016

This paper addresses the resource allocation (RA) problem in multi-cell cognitive radio networks. Besides the interference power threshold to limit the interference on primary users PUs caused by cognitive users CUs, a proportional fairness constraint is used to guarantee fairness among multiple cognitive cells and the impact of imperfect spectrum sensing is taken into account. Additional constraints in typical real communication scenarios are also considered-such as a transmission power constraint of the cognitive base stations, unique subcarrier allocation to at most one CU, and others. The resulting RA problem belongs to the class of NP-hard problems. A computationally efficient optimal algorithm cannot therefore be found. Consequently, we propose a suboptimal RA algorithm composed of two modules: a subcarrier allocation module implemented by the immune algorithm, and a power control module using an improved sub-gradient method. To further enhance algorithm performance, these two modules are executed successively, and the sequence is repeated twice. We conduct extensive simulation experiments, which demonstrate that our proposed algorithm outperforms existing algorithms.

• Journal of electromagnetic engineering and science
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2011

This paper proposes a systematic design for a precoding codebook for a transmit-ing space-division multiple access (TN-SDMA) sharing spectrum with existing fixed wireless service (FWS). Based on an estimated direction angle of a victim FWS system, an interfering transmitter adaptively constructs a codebook, forming a transmit in the direction angle, while satisfying orthogonal beamforming constraints. Sum throughput results indicate that the throughput loss of TN-SDMA relative to a practical SDMA, called per user unitary and rate control ($PU^2RC$), is lower at larger number of transmission antennas, lower signal-to-noise ratio, or a smaller number of users. In particular, a small loss (12% throughput loss) is provided for practical system parameters. Spectrum sharing results confirm that TNSDMA efficiently shares spectrum with FWS systems by reducing protection distance to more than 66 %. Although a TN-SDMA system always has lower throughput compared to $PU^2RC$ in non-coexistence scenarios; it offers an intriguing opportunity to re-use a spectrum already allocated to an FWS.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.3
• /
• pp.63-72
• /
• 1999

Recent studies on the Constant Bit Rate and Variable Bit Rate transmissions have mainly focused on the frame by frame encoder rate control based on the quantization parameter. With the existing approaches it is difficult to guarantee a consistent video quality. Also, the rate control overhead is too high for the real-time video sources. In this paper, a channel rate allocation scheme based on the control period is proposed to transmit a real-time video, in which the control period is defined by a pre-specified number of frames or group of pictures. At each control period, video traffic information is collected to determine the channel rate at the next control period. The channel rate is allocated to satisfy various channel rate constraints such that the buffer occupancy at the decoder is maintained at a target level. If the allocated channel rate approaches the level at which the negotiated traffic descriptions may be violated, the encoder rate is decreased through adjusting quantization parameters in the MPEG encoder. In the experimental results, the video quality and the overflow and underflow probabilities at the buffer are compared at different control periods. Experiments show that the video quality and the utilization of network bandwidth resources can be optimized through the suitable selection of the control period.

• Korean System Dynamics Review
• /
• v.6 no.1
• /
• pp.99-123
• /
• 2005

Although the generation market is competitive, the power market is easily exercised the market power by one generator due to its special futures such as a limited supplier, large investment cost, transmission constraints and loss. Specially, as Korea Electric industry restructuring is similar US competitive wholesale electricity market structure which discovered the several evidences of market power abuse, when restructuring is completed the possibility that market power will be exercised is big. Market power interferes with market competitions and efficiency of system. The goal of this study is to investigate the market price effects of the potential market power and the proposed market power mitigation strategy in Korean market using the forecasting wholesale electricity market model. This modeling is developed based on the system dynamics approach. it can analyze the dynamic behaviors of wholesale prices in Korean market. And then it is expanded to include the effect of market condition changed by 'strategic behavior' and 'real time pricing.' This model can generate the overall insights regarding the dynamic impact of output withholding by old gas fire power plant bon as a marginal plant in Korean market at the macro level. Also it will give the energy planner the opportunity to create different scenarios for the future for deregulated wholesales market in Korea.