• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.706-709
• /
• 2004

A numerical method was developed that imposes constraint condition on the order parameters in martensitic phase transformation. In the method, an amplitude function having values of 1 or 0 was multiplied to transformation rates. The merit of the method is that the imposition of the constraint condition is more straightforward than a method with Lagrangian multiplier and easy to implement in the tangent modulus method. The developed method is applied to three-dimensional finite element analyses of single and poly crystalline shape memory alloys.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.813-818
• /
• 1998

A simple method to measure the elastic modulus E and Poisson's ratio v of diamod-like carbon (DLC) films deposited on Si wafer was suggested. Using the anisotropic etching technique of Si we could make the edge of DLC overhang free from constraint of Si substrate. DLC film is chemically so inert that we could not on-serve any surface damage after the etching process. The edge of DLC overhang free from constraint of Si substrate exhibited periodic sinusoidal shape. By measuring the amplitude and the wavelength of the sinu-soidal edge we could determine the stain of the film required to adhere to the substrate. Since the residual stress of film can be determine independently by measurement of the curvature of film-substrate com-posite we could calculated the biaxial elastic modulus E/(1-v) using stress-strain relation of thin films. By comparing the biaxial elastic modulus with the plane-strain modulus E/(1-{{{{ { v}^{2 } }}) measured by nano-in-dentation we could further determine the elastic modulus and Poisson's ratio independently. This method was employed to measure the mechanical properties of DLC films deposited by {{{{ { {C }_{6 }H }_{6 } }} rf glow discharge. The was elastic modulus E increased from 94 to 169 GPa as the {{{{ { V}_{ b} / SQRT { P} }} increased from 127 to 221 V/{{{{ {mTorr }^{1/2 } }} Poisson's ratio was estimated to be abou 0.16∼0.22 in this {{{{ { V}_{ b} / SQRT { P} }} range. For the {{{{ { V}_{ b} / SQRT { P} }} less than 127V/{{{{ {mTorr }^{1/2 } }} where the plastic deformation can occur by the substrate etching process however the present method could not be applied.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 봄 학술발표회 논문집
• /
• pp.70-74
• /
• 1990

The finite plasticity in strain space is viewed by formulating the consistency condition and the thermodynamic condition with respect to proposed state variables. The Naghi-Trapp work assumption is used to obtain a constraint equation, and the normality equation is formulated. Finally, an elastoplastic tangent modulus, which is based on the derived equations in strain space, is proposed.

• 한국인터넷방송통신학회논문지
• /
• 제16권3호
• /
• pp.81-87
• /
• 2016

본 논문에서는 기존 MMA 적응 등화 알고리즘의 안정성과 낮은 신호대 잡음비에서 robustness를 개선하기 위해 adaptive modulus와 miniumum-disturbance 기법을 적용한 AM-SCS-MMA (Adaptive Modulus-Soft Constraint Satisfaction-MMA) 알고리즘의 성능을 해석하였다. AM-SCS-MMA는 적응 등화를 비용 함수를 최소화하기 위해 adaptive modulus와 기존의 LMS 나 gradient descent algorithm 대신 deterministic optimization problem의 minimum-disturbance 기법을 적용하여 탭 계수를 갱신하므로서 채널에서 발생되는 진폭과 위상 찌그러짐에 의한 부호간 간섭을 동시에 줄이면서 등화 필터의 안정성 및 다양한 잡음에 대한 roburstness를 개선시킬 수 있다. 이의 개선 성능을 확인하기 위해 시뮬레이션을 수행하였으며 등화기 출력 성상도, 잔류 isi, MSE와 채널 추적 능력을 나타내는 EMSE (Excess MSE) 및 SER을 적용하였다. 컴퓨터 시뮬레이션의 결과 AM-SCS-MMA는 MMA보다 잔류 isi와 MSE에서는 수렴 속도는 늦지만 정상 상태 이후 잔여량이 감소되고 열악한 신호대 잡음비에서 robustness가 있었지만, 채널 추적 능력에서는 열화됨을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.474-477
• /
• 2006

To predict thermal stress independent of uncertain material properties of early age concrete, such as elastic modulus and creep, thermal stress device is used. In order to verify the application of various degree of constraint in the thermal stress device, a series of experiments were performed on mass concrete followed by numerical simulation. The application of various degrees of constraint can be achieved by using constraint frame material with different thermal expansion coefficient, length, and cross sectional area. Temperature development in the real structure has been simulated using temperature and humidity control chamber. The results from experiments and numerical analysis show that the thermal stresses estimated from simulation agree well with the general stress variations in the real structure even though the properties of concrete are uncertain.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.488-503
• /
• 1999

The present paper considers the constraint effect on J-R curves under the two-parameter $J-A_2$ controlled crack growth within a certain amount of crack extension. Since the parameter $A_2$ in $J-A_2$ three-term solution is independent of applied loading under fully plasticity or large-scale defor-mation $A_2$ is a proper constraint parameter uring crack extension. Both J and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and A2 as a con-straint parameter. Approach of the constraint-corrected J-R curve is proposed and a procedure of transferring the J-R curves determined from standard ASTM procedure to non-standard speci-mens or real cracked structures is outlined. The test data(e.g. initiation toughness JIC and tearing modulus $T_R$) of Joyce and Link(Engineer-ing Fracture Mechanics 1997, 57(4) : 431-446) for single-edge notched bend[SENB] specimen with from shallow to deep cracks is employed to demonstrate the efficiency of the present approach. The variation of $J_{IC}$ and $T_R$ with the constraint parameter $A_2$ is obtained and a con-straint-corrected J-R curves is constructed for the test material of HY80 steel. Comparisons show that the predicted J-R curves can very well match with the experimental data for both deep and shallow cracked specimens over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. The constraint effects of specimen types and specimen sizes on the J-R curves can be easily obtained from the constrain-corrected J-R curves.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1239-1258
• /
• 2015

This paper presents a master-slave constraint method, which may substitute the conventional transformed-section method, to account for the changes in cross-sectional properties of composite members during construction and to investigate the time-dependent performance of steel-concrete composite bridges. The time-dependent effects caused by creep and shrinkage of concrete are considered by combining the age-adjusted effective modulus method and finite element analysis. An efficient computational tool which runs in AutoCAD environment is developed to simulate the construction process of steel-concrete composite bridges. The major highlight of the developed tool consists in a very convenient and user-friendly interface integrated in AutoCAD environment. The accuracy of the proposed method is verified by comparing its results with those provided by using the transformed-section method. Furthermore, the computational efficiency of the developed tool is demonstrated by applying it to a steel-concrete composite bridge.

• 유변학
• /
• 제3권2호
• /
• pp.166-174
• /
• 1991

동일화학종이면서 \ulcorner량이 다른 두 단분산 고분자를 혼합한 2성분 다분산 농축계에 equivalent primitive chain model을 적용하여 사슬주위의 제약완화에 따른 관의 재형성 효 과를 각 사슬의 특성완화시간으로 산정하여 나타내었다. Polystyrene 시료에 대하여 동력하 적 실험을 실시한 결과를 이용하여 사동모델에 따른 각 사슬의 최장완화시간은 복소수 점도 의 허수분분(η＂)대 주파수($\omega$)의 관계, 관의 재형성 시간은 $\omega$ 변화에 따른 storage modulus(G＇) 로부터 각각 도출하였다. 이러한 작업을 통하여 특성완화 시간들이 분자량 및 각 성분 농도에의 의존성을 더욱 상세히 파악할 수 있었다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.206-211
• /
• 1999

The purpose of this study is to investigate the natural frequencies and mode shapes of beam-columns on the non-homogeneous foundaion. The beam model is based on the classical Bernoulli-Euler beam theory. The linear foundation modulus is chosen as the non-homogeneous foundation in this study . The differentidal equation goeverning free vibrations of such beam-columns subjected to axial load is derived and solved numerically for calculting the natural frquencies and mode shapes. In numerical fivekinds of end constraint are considered, and the lowest four natural frquencies and corresponding mode shape are obtained as the non-dimensional forms.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 추계학술발표대회
• /
• pp.779-782
• /
• 2010

Self-calibration에서 3차원 좌표의 복원은 호모그래피 행렬 H를 계산하면 얻을 수 있다. 이 호모그래피 행렬을 얻는 방법은 dual absolute quadric, Kruppa Equation(dual conic), plane at infinity(modulus constraint)를 사용하는 방법과 같이 세 가지 방법이 일반적으로 사용된다. 제안하는 방식은 dual absolute quadric을 사용한다. 카메라 내부 속성이 모든 뷰에서 동일하고 비틀림이나 영상의 원점이 중심이라는 가정을 두고 호모그래피 행렬 H를 계산한다. 실험을 통해서 주어진 가정으로 정밀한 복원이 가능함을 보였다.