• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.702-710
• /
• 2008

In this paper, the observability of the INS/GPS integrated system for a land vehicle is analyzed on measurements and different filters with respect to the measurements are designed. In the stationary case, it is shown that horizontal accelerometer biases and vertical attitude errors and gyro biases are unobservable. An 8-state filter is designed based on the observability analysis. When GPS signal is available, a 15-state filter is used with position and velocity measurements. To estimate the INS errors even in the case that GPS signal is blocked a filter is designed in consideration of the non-holonomic constraints of a land vehicle. In this case, the horizontal position and velocity errors and vertical attitude error are unobservable. However, a 12-state filter including the velocity states is designed to estimate the accelerometer biases. When GPS signal recovers, a 9-state filter is used excluding the sensor biases. This paper presents a multi-dimensional filter that switches the four filters according to the usable measurements and maneuver environments. A simulation is carried out to verify the performance of the proposed filter.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.267-276
• /
• 1993

This paper discusses the neural network application in the study on the obstacle avoidance of robot manipulator during the trajectory planning. The collision problem of two robot manipulators which are simultaneously moving in the same workspace is investigated. Instead of the traditional modeling method, this paper processing based on the calculation of joint angle in the cartesian coordinate with constrained condition shows the possibility of real time control. The problem of the falling into the local minima is cleared by the adaptive weight factor control using the temperature adding method. Computer simulations are shown for the verification.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.589-597
• /
• 2011

In this paper, optimal tuning of a cross-coupled controller linked with the feedforward controller and the disturbance observer is studied to improve contouring and tracking accuracy as well as robustness against disturbance. Previously developed integrated design and optimal tuning methods are applied for developing the robust tuning method. Strict mathematical modeling of the multivariable system is formulated as a state-space equation. Identification processes of the servomechanism are conducted for mechanical servo models. An optimal tuning problem to minimize both the contour error and settling time is formulated as a nonlinear constrained optimization problem including the relevant controller parameters of the servo control system. Constraints such as relative stability, robust stability and overshoot, etc. are considered for the optimization. To verify the effectiveness of the proposed optimal tuning procedure, linear and circular motion experiments are performed on the xy-table. Experimental results confirm the control performance and robustness despite the variation of parameters of the mechanical subsystems.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.391-397
• /
• 2011

Control of interior permanent magnet (IPMSM) is difficult because its nonlinearity and parameter uncertainty. In this paper, a fuzzy c-regression models clustering algorithm which is based on T-S fuzzy is used to model IPMSM with a series linear model and weight them by memberships. Lagrangian of constrained function is built for calculating clustering centers where training output data are considered. Based on these clustering centers, least square method is applied for T-S fuzzy linear model parameters. As a result, IPMSM can be modeled as T-S fuzzy model for T-S fuzzy control of them.

• Smart Media Journal
• /
• v.4 no.1
• /
• pp.25-32
• /
• 2015

Powering wireless sensors with energy harvested from the environment is coming of age due to the increasing power densities of both storage and harvesting devices and the electronics performing energy efficient energy conversion. In order to maximize the functionality of the wireless sensor network, minimize missing packets, minimize latency and prevent the waste of energy, problems like congestion and inefficient energy usage must be addressed. Many sleep-awake protocols and efficient message priority techniques have been developed to properly manage the energy of the nodes and to minimize congestion. For a WSN that is operating in a strictly energy constrained environment, an energy-efficient transmission strategy is necessary. In this paper, we present a novel transmission priority decision scheme for a heterogeneous body sensor network composed of normal nodes and an energy harvesting node that acts as a cluster head. The energy harvesting node's decision whether or not to clear a normal node for sending is based on a set of metrics which includes the energy harvesting node's remaining energy, the total harvested energy, the type of message in a normal node's queue and finally, the implementation context of the wireless sensor network.

• Earthquakes and Structures
• /
• v.10 no.6
• /
• pp.1451-1465
• /
• 2016

The effectiveness of base isolation (BI) systems for mitigation of seismic vibration of bridges have been extensively studied in the past. It is well established in those studies that the performance of BI system is largely dependent on the characteristics of isolator yield strength. For optimum design of such systems, normally a standard nonlinear optimization problem is formulated to minimize the maximum response of the structure, referred as Stochastic Structural Optimization (SSO). The SSO of BI system is usually performed with reference to a problem of unconstrained optimization without imposing any restriction on the maximum isolator displacement. In this regard it is important to note that the isolator displacement should not be arbitrarily large to fulfil the serviceability requirements and to avoid the possibility of pounding to the adjacent units. The present study is intended to incorporate the effect of excessive isolator displacement in optimizing BI system to control seismic vibration effect of bridges. In doing so, the necessary stochastic response of the isolated bridge needs to be optimized is obtained in the framework of statistical linearization of the related nonlinear random vibration problem. A simply supported bridge is taken up to elucidate the effect of constraint condition on optimum design and overall performance of the isolated bridge compared to that of obtained by the conventional unconstrained optimization approach.

• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.96-101
• /
• 2010

접안을 위해 선박이 안벽으로 접근할 때나, 좁은 항내에서 선박을 조종할 때는 항해 중에서보다 많은 제약이 따른다. 그것은 대형 선박일수도 분 관성력으로 인해 효과적인 제어가 어렵기 때문이다. 그래서 터그보트를 수동적으로 제어하여 선박을 접안시키는 것이 현재로선 가장 일반적이 접안기술이라 할 수 있다. 지능적인 제어기술을 적용하여 자동접안을 시도하려는 연구결과가 보고되고 있으나, 대부분이 auto-pilot 기술에 지나지 않으며 어느 것 하나 안정적인 접안을 위한 접안기술로 볼 수 없다. 이와 같이 터그보트를 이용할 수밖에 없는 현실이라면, 보다 효과적인 터그보트 제어기술을 기반으로 한 접안지원시스템을 개발하는 것이 우선일 것이다. 그래서 본 논문에서는 터그보트의 원격제어를 통해 모선을 효과적이고 안정적으로 접안하는 문제에 대해 고찰하였다. 즉, 터그보트로 조종되는 선박조종시스템에 대한 모델링을 수행하고, 터그보트로부터 발생되는 제어력을 적절히 분배하여 모선을 제어하는 새로운 접안지원시스템을 개발하였다. 시뮬레이션을 통해 제안된 시스템의 유효성을 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.2
• /
• pp.78-88
• /
• 1989

The fundamental objective of this paper has been to develop a means for incoporating the concept of the linear fractional transformation more generally and easily into multivariable feedback design procedure. When we design a continuous system, generally, we are constrained by design methods which arise specifically for the system. Also, in the design of descrete systems, it is the same concept. But the approach developed in this paper is very flexible in the view that in spite of being the continuous or discrete, the design can be done using a well known design method in both cases. That is, when we design a contnuous system or discrete system, the design can be done by a standard design method of continuous systmes or discrete ones, depending on the choice of the linear fractional transformation. Therefore, it is noted that this concept has broken the unflexibility of the conventional design rules for multivariable control system. In essence, the concept shows that if a given system is controllable, some desirable design, for examples, pole assignment within prespecified region, optimal controllers with poles within prespecified region etc., could be done easily by transforming a desirable region into a standard region, such as the complex left-half plane or the unit disk, by the chosen linear fractional transformation, and then by designing the transformed system using the well known standard results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.519-524
• /
• 2009

This paper describes a new sensor system for 3D environment perception using stereo structured infrared light sources and a camera. Environment and obstacle sensing is the key issue for mobile robot localization and navigation. Laser scanners and infrared scanners cover $180^{\circ}$ and are accurate but too expensive. Those sensors use rotating light beams so that the range measurements are constrained on a plane. 3D measurements are much more useful in many ways for obstacle detection, map building and localization. Stereo vision is very common way of getting the depth information of 3D environment. However, it requires that the correspondence should be clearly identified and it also heavily depends on the light condition of the environment. Instead of using stereo camera, monocular camera and two projected infrared light sources are used in order to reduce the effects of the ambient light while getting 3D depth map. Modeling of the projected light pattern enabled precise estimation of the range. Two successive captures of the image with left and right infrared light projection provide several benefits, which include wider area of depth measurement, higher spatial resolution and the visibility perception.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.12
• /
• pp.1053-1060
• /
• 2016

As location recognition for autonomous vehicles develops, the need for a precise map for autonomous driving has increased. A precise map must be built based upon accurate position. Recent studies have accelerated research in this area by using various sensors that calculate the accurate position by comparing and recognizing objects around the roads. However, application of such methods is limited because these studies only take objects with significant verticality into consideration. Thus, new research is needed to overcome the limitations: a method that is not constrained by the existence of certain types of surrounding objects shall be proposed. Most roads contain road marking information, such as lanes, direction signs, and pedestrian crossings. Such information on the road surface is a valuable resource for building a precise map. This paper proposes a method of building a precise map by using road marking information.