• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.1051-1066
• /
• 2015

The study aims on the effect of material dependency in elastic- plastic contact models by contact analysis of sphere and flat contact model and wheel rail contact model by considering the material properties without friction. The various materials are selected for the analysis based on Young's modulus and yield strength ratio (E/Y). The simulation software 'ANSYS' is employed for this study. The sphere and flat contact model is considered as a flattening model, the stress and strain for different materials are estimated. The simulation of wheel-rail contact model is also performed and the results are compared with the flattening model. The comparative study has also been extended for finding out the mean contact pressure for different materials the E/Y values between 150 and 660. The results show that the elastic-plastic contact analysis for materials up to E/Y=296.6 is depend on the nature of material properties and also for this material the mean contact pressure to yield strength reaches 2.65.

• Advances in concrete construction
• /
• v.5 no.3
• /
• pp.221-240
• /
• 2017

The modeling of the mechanical behavior of quasi-brittle materials is still a challenge task, mainly in failure processes when fracture and plasticity phenomena become important actors in dissipative processes which occur in materials like concrete, as instance. Many homogenization-based approaches have been proposed to deal with heterogeneous materials in the last years. In this context, a computational homogenization modeling for concrete is presented in this work using the concept of Representative Volume Element (RVE). The material is considered as a three-phase material consisting of interface zone (ITZ), matrix and inclusions-each constituent modeled by an independent constitutive model. The Representative Volume Element (RVE) consists of inclusions idealized as circular shapes symmetrically and nonsymmetrically placed into the specimen. The interface zone is modeled by means of cohesive contact finite elements. The inclusion is modeled as linear elastic and matrix region is considered as elastoplastic material. A set of examples is presented in order to show the potentialities and limitations of the proposed modeling. The consideration of the fracture processes in the ITZ is fundamental to capture complex macroscopic characteristics of the material using simple constitutive models at mesoscopic level.

• Journal of Korea Foundry Society
• /
• v.26 no.2
• /
• pp.98-103
• /
• 2006

Metal-mold reactions between investment mold and TiAl alloys were investigated for the economic net-shape forming of TiAl alloys. The effect of mold preheating temperatures on the metal-mold reaction were investigated using a vacuum induction-melting furnace. In the case of TiAl alloys, there were no ${\alpha}$-case formation reactions. There were neither interstitial nor substitutional ${\alpha}$-case formations as TiAl alloys have both negligible solubility of oxygen and low activity in molten states. The fluidity of TiAl alloys increases with mold preheating temperature since they have a peritectic reaction that appears in the form of envelope, surrounding each particles of the primary constituent. The results of the investment casting of TiAl alloys confirm that the casting route in our study can be an effective approach for the economic net-shape forming of TiAl alloys.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.304-304
• /
• 2006

The possibility to develop optoelectronic devices with improved properties by controlling the degree of organization at the molecular level of organic materials has been driving the design of new ${\pi}-conjugated$ systems. In particular, the organization by self-assembling processes (${\tilde{\Box}}{\d{\Box}}}$ interactions, hydrogen bonding) of well-defined oligomeric systems such as disubstituted oligothiophene derivatives has been demonstrated as a promising approach to conjugated materials with a high degree of structural order of the constituent building blocks. The self-organization of conjugated building blocks in solution or on surfaces, leading to the construction of nanoscopic and mesoscopic architectures, represents a starting point for the construction of molecular electronics or even circuits, through surface patterning with nanometer-sized objects.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.337-341
• /
• 2004

This paper concerns the analytical modeling and dynamic analysis of advanced rotating blade structure implemented by a dual approach based on structural tailoring and viscoelastic materials technology. Whereas structural tailoring uses the directionality properties of advanced composite materials, the passive materials technology exploits the damping capabilities of viscoelastic material(VEM) embedded into the host structure. The structure is modeled as a composite thin-walled beam incorporating a number of nonclassical features such as transverse shear, warping restraint, anisotropy of constituent materials, and warping and rotary inertias. The VEM layer damping treatment is modeled by using the Golla-Mushes-McTavish(GHM) method, which is employed to account for the frequency-dependent characteristic o the VEM. The displayed numerical results provide a comprehensive picture of the synergistic implications of the application of both techniques, namely, the tailoring and damping technology on vibration response of thin-walled beam structure exposed to external time-dependent excitations.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.43-47
• /
• 2012

Electromigration in molten $Ge_2Sb_2Te_5$ (GST) was characterized using pulsed DC stress to an isolated line structure. When an electrical pulse was applied to the GST, GST lines were melted by Joule heating, and Ge and Sb atoms migrate to the cathode, whereas Te atoms migrate to the anode. This elemental separation in the molten GST was caused by an electrostatic force-induced electromigration. The effects of O-, N-, and Bi-doping on the electromigration were also investigated, and atomic mobility changes by the doping were investigated by quantifying $DZ^*$ values. The Bi -doping did not affect the $DZ^*$ values of the constituent atoms in the molten GST, but the D$DZ^*$ values decreased by O-doping and N-doping.

• Economic and Environmental Geology
• /
• v.33 no.5
• /
• pp.435-442
• /
• 2000

Although the mummies of Lee Myeong-Jung and his wife who were a member of the Moon family, were buried in similar sites in around 1560, the degree of decay of the dead bodies and antiquities between two people were quite different. This study was focused on the cause of-those differences in terms of engineering geology. Cranular soil found several metered depth around the study site has good drainage ability and such characteristic could be a factor of excellent conservation of dead body. From the physical characteristics of the lime-containing material that is considered to be a barrier from water and air, it was observed that the material around dead body of wife was more compact and denser than that of husband. Such results could be a clear evidence that the lime containing material around dead body of wife was excellent barrier for keeping away from water and air. To investigate those differences of physical characteristics and constituent materials between two lime-containing materials, minerals had to be identified from the two materials. It was revealed that lime-containing material around dead body of wife contains gypsum and more calcite, which could be the reason for better barrier preventing from water and air than those around husband.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.685-688
• /
• 2005

Antibacterial and antiplatelet activities of Acorus gramineus rhizome-derived asaronaldehyde and asaron were analyzed using platelet aggregometer and six human intestinal bacteria. Active constituent of A. gramineus rhizome was isolated and characterized as asaronaldehyde by spectral analyses. At 2 and 1 mg/disk, asaronaldehyde exhibited strong inhibition of Clostridium perfringens and C. difficile without adverse effects on growth of beneficial bacteria such as Bifidobacterium bifidum, Lactobacillus acidophilus, and L. casei. Asaron also revealed moderate growth inhibition against C. perfringens and C. difficile at 2 mg/disk, no growth-inhibiting activity was observed on B. bifidum, L. acidophilus, L. casei, and E. coli. At 50% inhibitory concentration ($IC_{50}$) value, asaronaldehyde was effective in inhibiting platelet aggregation induced by collagen ($IC_{50}$, $27.6\;{\mu}M$) and arachidonic acid ($IC_{50}$, $53.7\;{\mu}M$). These results suggest asaronaldehyde may be useful as lead compound for inhibiting platelet aggregation induced by collagen and arachidonic acid.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.158-161
• /
• 2006

Superconducting YBCO films were successfully fabricated by MOD process using chemically modified precursor solution. In this study, a chemically modified precursor solution for MOD processing was synthesized using metal-organic salts and organic additives. It was shown that crack-free and uniform precursor films were formed after calcination in humidified Oxygen atmosphere. Less than 3 hours are required to finish the calcination process. XRD measurement shows that $BaF_2,\;CuO,\;Y_2O_3$ are major constituent of precursor films. Furthermore, YBCO films without any secondary phases were successfully fabricated after annealing in wet $Ar/O_2$ atmosphere. The YBCO film prepared on a $LaAlO_3$ single crystal substrate ($10mm{\times}10mm$) gives transport $I_c$ of 10A at 77K. This chemical modification approach is a possible candidate for improving MOD-processing of YBCO coated conductor.

• Korean Journal of Materials Research
• /
• v.25 no.1
• /
• pp.48-53
• /
• 2015

$TiH_2$ nanopowder was made by high energy ball milling. The milled $TiH_2$ and CNT powders were then simultaneously synthesized and consolidated using pulsed current activated sintering (PCAS) within one minute under an applied pressure of 80 MPa. The milling did not induce any reaction between the constituent powders. Meanwhile, PCAS of the $TiH_2$-CNT mixture produced a Ti-TiC composite according to the reaction ($0.92TiH_2+0.08CNT{\rightarrow}0.84Ti+0.08TiC+0.92H_2$, $0.84TiH_2+0.16CNT{\rightarrow}0.68Ti+0.16TiC+0.84H_2$). Highly dense nanocrystalline Ti-TiC composites with a relative density of up to 99.7% were obtained. The hardness and fracture toughness of the dense Ti-8 mole% TiC and Ti-16 mole% TiC produced by PCAS were also investigated. The hardness of the Ti-8 mole% TiC and Ti-16 mole% TiC composites was higher than that of Ti. The hardness value of the Ti-16 mole% TiC composite was higher than that of the Ti-8 mole% TiC composite without a decrease in fracture toughness.