• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.952-959
• /
• 2010

This study was conducted to evaluate growth, behavior and carcass traits of fattening Hanwoo (Korean native cattle) steers managed in different group sizes. A total of 48 animals, 6 months of age, were allocated to one of three group sizes and the experiment was conducted from 12 to 30 months of age. Groups were balanced for weight and the group sizes consisted of 4, 8, or 12 steers which were named 4sG, 8sG and 12sG, respectively. When animals were 12 months of age, initial fasted body weight (BW, $304.51{\pm}12.40\;kg$) was measured. All animals were housed at a constant space allowance of $8.82\;m^2$ per animal, and a feeder and drinker were provided per 4 animals. The whole fattening stage was divided into three phases: phase I (from 12 to 18 month of age), phase II (from 19 to 24 month of age), and phase III (from 25 to 30 month of age). Steers managed in 12sG showed low (p<0.05) growth rate and feed conversion rate (FCR) in phase I and phase II when compared to other treatment groups. However, this difference was not observed for the whole fattening phase (p>0.05). Steers managed in 4sG had a thick (p<0.05) ultrasound back fat thickness at 15 and 18 months of age. However, group size had no effect on meat yield and quality traits of area and marbling score. Animals managed in 8sG yielded a better meat grade of "A" than the "B" grade in other treatment group sizes. Lean color, fat color, firmness and maturity scores did not differ among group sizes. Hanwoo steers housed under 12sG spent less time on eating concentrate, relevant higher eating rate, less frequency of allogrooming, and more time on walking (p<0.05). It could be concluded that a large group size retarded growth rate and back fat thickness in the fattening stage, which was mainly focused on 15 and 18 months of age.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2298-2304
• /
• 2011

This paper describes and presents the design of a miniaturized low pass filter (LPF) for microwave frequency region using a common defected ground structure (CDGS). In this study a half-sized LPF is obtained using CDGS, while the previous LPFs with the conventional DGS showed a mild size-reduction. The common DGS (CDGS) is realized on the common ground plane of two microstrip lines, i. e double-sided microstrip lines, which exist back-to-back to each other. In order to show the validity of the proposed design, an example of LPF using CDGS and double-sided microstrip lines is designed, fabricated and measured using the dielectric substrate with the dielectric constant of 2.2 and with the thickness of 31mils. The size of the designed LPF using CDGS is only 52.6% compared to that of the previous LPF with the conventional DGS. In addition, it is shown that the performances of the proposed LPF are well preserved after the size-reduction with the measured S11 and S21 of -22dB, min and -0.19dB, max, respectively.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.783-787
• /
• 2004

Microwave dielectric properties and the microstructure of $Ba_5Nb_4O_{15}$ ceramics with $PbO-B_2O_3-SiO_2$ glass frit were investigated to reduce the sintering temperature of $Ba_5Nb_4O_{15}$ ceramics as a function of the amount of glass frit from $0.5wt\%$ to $10wt\%$ and the sintering condition. The sintered density and the microwave dielectric properties of $Ba_5Nb_4O_{15}$ ceramics were remarkably changed with the amount of glass fit which existed as a liquid phase and assisted the densification. $Ba_5Nb_4O_{15}$ with $3wt\%$ $PbO-B_2O_3-SiO_2$ glass frit sintered at $900^{\circ}C$ for 2 h showed dielectric constant (K) of 41.4, a quality factor (Q $\times$f) of 13,485 GHz, and a Temperature Coefficient of resonant Frequency (TCF) of 9 ppm/$^{\circ}C$. Due to no trace of physical and chemical reaction between this composition and Ag electrode cofired at $900^{\circ}C$ for 2 h, this ceramics can be a good candidate for the multilayer dielectric filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.486-493
• /
• 2010

This article introduces a novel ultra wideband(UWB) bandpass filter(BPF) with sharp roll-off characteristics in stripline structure. The UWB characteristic is basically obtained from capacitive coupled cross resonator. The resonator has ${\lambda}/2$ length. And at the center of the resonator, two stubs are loaded, one is a ${\lambda}/8$ short-circuited stub and the other is a ${\lambda}/8$ open-circuited stub. The two stubs provide two attenuation poles at lower and upper cutoff frequencies. For input and output lines, two identical capacitively coupled lines have been installed to suppress the unwanted signals in the lower and upper stopbands. The filter has been designed for the U.S. UWB band(3.1~10.6 GHz) with two transmission zeros at 2.4 and 11.1 GHz. The filter has been realized with Low Temperature Core-fired Ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. Insertion loss less than 0.7 dB and return loss better than 14 dB in the pass band have been measured. The group delay in the center frequency is 0.27 ns and the group delay variation within pass band is less than 0.5 ns. The size of the filter is $6{\times}18{\times}0.6\;mm^3$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.50-60
• /
• 2018

In this paper, we developed a broadband multi-layered radome applicable for high-power applications. In this regard, we presented the wave propagation characteristics of the broadband multi-layered radome with the ABCD matrix and obtained the optimal thickness and the material constant for each layer by an optimization algorithm called "particle swarm optimization," implemented by a commercial numerical modeling tool. Further, we redesigned it in view of mechanical properties to reflect environmental conditions such as wind, snow, and ice. The power transmission property was reanalyzed based on the recalculated data of each layer's thickness to consider the limitations of the fabrication of a large structure. Under the condition of a peak electric field strength that is 10 dB above the critical electric field strength in air breakdown, we analyzed the air breakdown by radio frequency(RF) in the designed radome using the commercial full-wave electromagnetic tool. The radome was manufactured and tested by continuous wave(CW) RF small signal and large signal in an anechoic chamber. The test results showed good agreement with those attained by simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.141-146
• /
• 2018

Recently, location recognition technology has attracted much attention, especially for locating people or objects in an indoor environment without being influenced by the surrounding environment GPS technology is widely used as a method of recognizing the position of an object or a person. GPS is a very efficient, but it does not allow the positions of objects or people indoors to be determined. RFID is a technology that identifies the location information of a tagged object or person using radio frequency information. In this study, an RFID system is constructed and the position is measured using tags. At this time, an error occurs between the actual and measured positions. To overcome this problem, a neural network is trained using the measured and actual position data to reduce the error. In this case, since the number of read tags is not constant, they are not suitable as input values for training the neural network, so the neural network is trained by converting them into center-of-gravity inputs and median value inputs. This allows the position error to be reduce by the neural network. In addition, different numbers of trained data are used, viz. 50, 100, 200 and 300, and the correlation between the number of data input values and the error is checked. When the training is performed using the neural network, the errors of the center-of-gravity input and median value input are compared. It was found that the greater the number of trained data, the lower the error, and that the error is lower when the median value input is used than when the center-of-gravity input is used.

• Composites Research
• /
• v.13 no.2
• /
• pp.30-39
• /
• 2000

It is difficult for civil engineer to apply composite materials of laminated type to structure for civil construction because of complicated theory although those have much merit. A simple method by which one can predict "exact" values of the natural frequency of vibration of laminated plates is presented. Many laminates with particular orientations have negligible values of $B_{16}$ and $B_{26}$ as the number of plies increases. Such laminates, with $D_{16}$ = $D_{26}$ ->0 can be solved by the same equation as for the special orthotropic laminates(1991,1995). If the quasi-isotrpic constants are used, It is possible to simplify analysis procedure since the equations for isotropic plates can be used. Use of some coefficients can produce "exact" values for laminates with such configuration. This coefficient, in fact, represents the effect of the anisotropy of the laminate. D. H. Kim proposed to use a correction factor, he developed, to produce "exact" solution out of the approximate solution obtained by using the quasi-isotropic constants(1995). In this paper, the fiber orienation studied is [$\alpha$/$\beta$/$\beta$/$\gamma$/$\alpha$/$\alpha$/$\beta$]r, with $\alpha$=-$\beta$, and $\gamma$${\gamma}$=$0^{\circ}$ or $90^{\circ}$ and the above-mentioned method is used to obtain the natural frequencies of plates with such orientations, and detailed result is presented for the use of engineers.nted for the use of engineers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.3
• /
• pp.285-294
• /
• 2020

This study investigated the use of Ground Penetrating Radar (GPR) over a two-decade period on public roads, focusing on the electromagnetic characteristics of the pavement dielectrics and attenuation. From the results, a typical range of characteristic value, influencing factors, and a correction method were suggested. The typical dielectrics of asphalt pavements were 4-7, as measured by an air-coupled 1 GHz GPR antenna. The dielectrics of concrete pavements were very large in the early age, but were drastically reduced with ageing. Ten years on, collection was in the range of 6-12. The dielectrics were proportional to the relative humidity (R.H.) of the atmosphere. The effects were reduced to one eighth with an overlay. Attenuation generally increased with thickness of the road layer, and also increased where there was damage. The GPR results could also vary depending on the weather conditions as well as on the characteristics of the GPR equipment, even at the same frequency. Therefore, GPR surveys should be performed on road surfaces without debris on a single, fine day. The reliability of the GPR analysis could be improved by cores and equipment calibration with other non-destructive test surveys.

• Development and Reproduction
• /
• v.15 no.2
• /
• pp.133-141
• /
• 2011

The marine ornamental industry has become a multi-billion dollar industry these days. As developing, however, this industry has been criticized for the indiscriminate captures and the destruction of the surrounding environment. To circumvent these problems, it is suggested to breed the organisms artificially. While clownfishes Amphiprion sp. and Premnas sp. are the most famous ornamental organisms in the trade, few studies are yet available on the culture and commercial production of these fishes. These studies were performed to investigate the spawning periodicity, behavior and the habits during egg incubation, and to provide the information on the mass hatching system. The spawning periodicity and frequency were different in 4 pairs under the constant condition, temperature, salinity and photoperiod. On the contrary, the male's behaviors for egg incubation are almost same in the all. The egg-fanning activity of the male increased as the developing eggs reaching to the hatching day. Based on the above results, we designed a new artificial hatching system, the rotating type (RT), and compared it with the aeration type (AT) and spray type (ST) that were previously described. RT showed higher hatching rate of 87.3% than AT (74.4%) and ST (60.5%). Also, there were no significant differences in the hatching rate regardless of the number (2, 3, 5) of hatching plates. We suggest RT may accommodate various number of hatching plates and constitute a better hatching system for clownfishes.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.641-651
• /
• 2019

This study investigates three buildings arranged alongside at the same level, namely, the Josadang, the Buljojeon, and the Palsangjeon. Their backside is blocked by an embankment with an environmental condition unsuitable for wooden buildings. The pillar behind the Josadang had termite damage for which termite damage and environmental investigations had been conducted for the past four years. The termite damage was monitored four times using the termite detection dogs, and the environmental factors were surveyed 27 times, except during the winter season. As a result, the locations of the columns with a high frequency of responses from the termite detection dogs were found and damage was confirmed. According to the surface moisture content investigations, the surface moisture content was highest in the Josadang and lowest in the Buljojeon. After a statistical analysis, the mean, the median, and the mode values were compared. The difference between the mean and the median was found to be less, however, the mode varied significantly. The mode values of the Josadang and the Palsangjeon were 14.5% and 10.8%, respectively, higher than the 6.1% mode value of the Buljojeon. It was concluded that the temperature and the water content affected the termite damage, which increases if the temperature and the water content remain constant owing to the environmental factors.