• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.8
• /
• pp.392-398
• /
• 2006

The properties of tunable dielectric materials on RF frequency band are important high tunability and low loss for RF variable devices, variable capacitor, phased array antenna and other components application. Various composite of BST(barium strontium titanate) ratio combined with other non-electrical active oxide ceramics have been formulated for such uses. We present the tunable properties and Curie temperature on BST thick films. The grain growth of the weight ratio of $BaTiO_3$ increased. This can be explained by the substitute $Sr^{2+}$ ion for $Ba^{2+}$ ion in the $BaTiO_3$ system. The Curie temperature was shifted to lower temperature with increasing $SrTiO_3$in the $BaTiO_3-SrTiO_3$ system, because of decreasing the lattice constant. Also, the dielectric constant, tunability and K-factor of $(Ba_xSr_{1-x})TiO_3$ at over the Curie temperature decreased, at over the $60^{\circ}C$ fixation, maximum dielectric constant at Curie temperature and hence sharper phase transformation occurred at Curie temperature. The result were interpreted as a process of internal stress relaxation resulting form the increase of $90^{\circ}$ domains induced the BST. As a result, It is concluded that over the Curie temperature, frequency response and DC field effect for the tunable properties of BST thick film are suppressed by the transition broadening. For the application of tunable devices, that the curie temperature was investigated to be increased.

• Journal of the Korean institute of surface engineering
• /
• v.13 no.3
• /
• pp.146-154
• /
• 1980

The effects of various electrodeposition conditions (deposition temperature and cathode current density) on preferred orientation and microhardness of electrodeposited Ni-Sn and Sn-Zn alloys were studied. At deposition temperatures from 25$^{\circ}$ to 95$^{\circ}C$ and constant cathode current density of 270 and 530 A/$m^2$ Ni-Sn and Sn-Zn were codeposited in chloride-fluoride acid and stannate-cyanide alkaline electrolyte bath respectively. Ni-Sn alloy deposited at temperatures from 25$^{\circ}$ to 35$^{\circ}C$ was composed of single phase of $Ni_3Sn_4$ with 73 wt.% Sn and the one deposited at temperatures from 45$^{\circ}$ to 95$^{\circ}C$ was made of multiphase mixture of NiSn, $Ni_3Sn_2$ and $Ni_3Sn_4$ with nearly equiatomic composition (65.5 wt.% Sn). The random orientation of thermody-namically metastable NiSn phase (hexagonal structure) predominated at deposition temperature range 25$^{\circ}$-45$^{\circ}C$, and the strong (110) preferred orientation was found at 65$^{\circ}$-85$^{\circ}C$ and then disappeared again at 95$^{\circ}C$. The microhardness of Ni-Sn deposits increased with deposition temperature up to 85$^{\circ}C$, and then decreased at constant cathode current density. The preferred orientation and the maximum microhardness were discussed in terms of lattice contractile stress which result from desorption of hydrogen atom absorbed in deposit lattice. The Sn content of Sn-Zn alloy deposits increased with deposition temperature up to 75$^{\circ}C$, and then decreased at constant cathode current density of 530 A/$m^2$. It also decreased with cathode current density up to 530 A/$m^2$, and then increased at constant deposition temperature of 25$^{\circ}C$. Sn-Zn alloy deposits were composed of two-phase mixture of ${beta}$-Sn and Zn. The preferred orientations of ${beta}$-Sn (tetragonal structure) changed with deposition temperature. The microhardness of Sn-Zn deposits decreased with deposition temperature. It also increased with cathode density up to 530 A/$m^2$, and then decreased at constant deposition temperature of 25$^{\circ}C$. The microhardness of Sn-Zn deposits was observed to be determinded more by the Sn content than by the preferred orientation.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.702-710
• /
• 2017

Recently, in many reptiles (14 genera of turtles in five families), common characteristics of incubation temperatures are known to determine the sexes of hatchlings in many species of turtles, including the map turtles, painted turtles and snapping turtles, emys turtle, etc. According to many researcher's reports, in general, incubation at $25^{\circ}C$ (cooler temperatures) produces all or mostly males, however, incubation at $31^{\circ}C$ (higher temperatures) or higher produces all or mostly females. Exceptionally, even cooler temperature ($20^{\circ}C$) produce females, they produced all or mostly females. Accordingly, it is well-known that incubation temperature is the sex determining agent in these turtles. However, this paper presents study of the sex ratio and nest ecology in natural spawning nest: Observations on hatching sex ratios of eggs collected from natural nests of T. sinensis are similar to a previous report of the same genus Trionyx in the soft-shelled turtles. However, this genus (or species) showed some different phenomena to other kinds of turtles such as various kinds turtles mentioned above. After collection of naturally spawned eggs (17 eggs of T. sisnensis) on the natural nests, a laboratory experiment by the constant incubation temperatures was conducted with natural fluctuating soil temperatures in the natural nest with the soft-shelled turtle, T. sinensis. And also laboratory experiments were conducted using constant incubation temperatures of $25^{\circ}C$ (cooler temp.) and $30^{\circ}C$ (higher temp.) with the turtle, T. sinensis. Exceptionally, it was confirmed that the first and second incubation temperatures can't control sex-determination in the freshwater soft-shelled turtle, T. sinensis. The sex ratio approximated 1:1 (${\chi}^2=0.06$, P>0.05 (the Ist experiment). And the sex ratio approximated 1:1 independently of incubation temperature (${\chi}^2=0.33$, P>0.05 (the 2nd experiment). Consequently, temperature has no effect on sex determination in the genus Trionyx in a soft-shelled turtle.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.120-126
• /
• 2004

In order to understand the temperature dependence of magnetic properties of $F_{84}Nb_{16}$(wt.%) thin films, ferromagnetic resonance experiments have been carried out. The ferromagnetic resonance spectra for all temperatures consist of several volume modes and one (or two) surface modes. It is suggested that both surface of the film have a perpendicular hard axis to the film plane (negative surface magnetic anisotropy). Saturation magnetization coincides with the Block's T$\^$2/3/ and spectroscopic splitting factor is almost constant in the temperature range from 113 K to 293 K. The surface magnetic anisotropy constant K$\_$s2/ of the film-substrate interface increased with decreasing temperature in the temperature range from 233 K to 293 K. The surface magnetic anisotropy constant K$\_$s1/ of the air-substrate interface decreased from -0.322 erg/$\textrm{cm}^2$ to -0.394 erg/$\textrm{cm}^2$ as the temperature decreased to 253 K and was almost constant below 233 K.233 K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.90-90
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode($Pt/Ti.SiO_2/Si$) using RF sputtering method. The dielectric constant of SBN thin films were increased with the increase of annealing temperature. The maximum dielectric constant of SBN thin film is obtained by annealing at 700[$^{\circ}C$]. The dielectric constant and dielectric loss had a stable value within -5~+5[V].

• Journal of ILASS-Korea
• /
• v.1 no.3
• /
• pp.29-36
• /
• 1996

The present study systematically investigates the effect of evaporation rate on the combustion characteristics and the flame stabilization in a gasoline engine. A constant volume combustion chamber was used to elucidate a basic combustion characteristics and the premixer was installed to control temperature and equivalence ratio. And the maximum pressure, combustion duration and flame propagation according to the evaporation rate were measured to determine the optimal temperature range for evaparating a gasoline fuel. These experimental results indicate that the combustion characteristics such as combustion chamber pressure and combustion duration were deteriorated by decreasing surrounding temperature of fuel injected. It was also found that the overall gasification process for gasoline fuel was strongly influenced by a combustion chamber temperature rather than a premixer temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.588-594
• /
• 2001

The aim of this paper is to develop the low temperature vacuum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation Usally operations just below atmospheric pressure, as with direct dryers, but some are built for vacuum operation with pressure as low 50 mmHg abs. The lowers the boiling point to $39^{\circ}C$ The experimental data of quantitative analysis for using practically were obtained by the constant drying rate period and reducing drying rate period according to the temperature of hot water which is the experimental parameters of present experiment. As the results, it took about 20 hours for material to reach about 18% of the final moisture content is order to store products for a long time about 450% of the early moisture content at the beginning of drying and maximum drying rate comes to about 0.30 kg/m2hr at about 350% of the moisture content.

• Journal of the Korean Ceramic Society
• /
• v.21 no.4
• /
• pp.341-348
• /
• 1984

$BaTiO_3$ and $SrTiO_3$ were mixed with the mole ratio of 35:65， 50:50 and 65:35 and heated at 1100~120$0^{\circ}C$ for 1~64 hours. The dielectrics of $BaTiO_3$-$SrTiO_3$ system were investigated as a function of amount of solid solution formed. The dielectric constant was increased and Curie temperature was shifted to higher temperature with increasing of heating of soaking time for the same composition and heating temperature. This can be explained by the homogeneous distribution of $Ba^{2+}$ and $Sr^{2+}$ ion in the $BaTiO_3$ system. The Curie temperature was shifted to lower temperature with increasing $SrTiO_3$ in the $BaTiO_3$-$SrTiO_3$system because of decreasing the lattice constant.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.441-447
• /
• 1995

Ba0.65Sr0.35TiO3 (BST) thin films were deposited on Pt/SiO2/Si(100) substrate by rf magnetron sputtering. The substrate temperature changed from 35$0^{\circ}C$ to 55$0^{\circ}C$ and crystalline BST thin films were deposited above 45$0^{\circ}C$. Most of the films had (111) preferred orientation regardless of deposition temperature, but the films changed to (100) preferred orientation as gas pressure increased. The dielectric constant increased with increasing substrate temperature and film thickness, and ranged from 100 to 600 at room temperature. The leakage current increased as substrate temperature increased or as film thickness decreased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1118-1122
• /
• 2006

In this study, in order to develop the low temperature sintering multilayer piezoelectric actuator, PMN-PNN-PZT system ceramics were manufactured and their microstructure, ferroelectric and piezoelectric properties were investigated. By increasing sintering temperature, remanent polarization$(P_r)$ was increased due to the increase of sinterability and grain size. However, coercive $field(E_c)$ showed an opposite tendency to remanent polarization owing to the feasibility of domain wall motion. At the sintering temperature of $900^{\circ}C$, dielectric $constant({\varepsilon}_r)$, electromechanical coupling $factor(k_p)$, piezoelectric $constant(d_{33})$ and mechanical quality $factor(Q_m)$ showed the optimal value of 1095, 0.60, 363 and 1055, respectively, for multilayer piezoelectric actuator application.