• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1290-1291
• /
• 2006

Fabrication of $Fe_3AlC$ matrix in-situ composite, reinforced by a FeAl phase, was studied by using the powder metallurgical processing route. Especially, in order to disperse the second phase more finely, we chose the mechanical alloying process. We investigated the microstructural and mechanical properties of the consolidated material. After consolidation by vacuum hot pressing, the compact showed almost full density and consisted of a $Fe_3AlC$ matrix and FeAl second phase (average particle size was less than 1m). The compact showed HV746, which was higher than that of the arc melted $Fe_3AlC$ monolithic material, HV603.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 Lecture Notes by Two Distinguished Scholars
• /
• pp.1.1-16
• /
• 1997

This lecture summarizes the progress of the development of the different ground improvement techniques in Bangkok Plain and is reviewed in relation to the extensive deep wen pumping and the resulting piezometric drawdown at deeper depths. Case records of test embankments with sand drains, sand wicks and PVD are presented to inustrate the effectiveness of different types of vertical drains with surcharge. The use of prefsbicated drain seems more superior than the other types of sand drain. Construction of test embaxlkment, criteria for PVD selection and relevant laboratory testing techniques are discussed for formulating the specif'ication. Alternative teckuuque, such in, the use of deep chemical mixing is reviewed in terms of the efficiency of cement, lime and flyash as additive. Vacuum pre-loading with surcharge and elctro- osmotic consolidation are also explored as possible tectmiques to improve the engineering properties of soft Bangkok clay.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1181-1192
• /
• 2008

A laboratory investigation was carried out into effects of strain rate on undrained shear behavior of Holocene clay underneath Kobe Airport with an objective to evaluate the factor of safety of the retaining structure built on it. It was examined in a series of triaxial compression and extension tests performed using different rate of axial straining. A comparative compression test in which the strain rate was changed in steps was also carried out. Similar tests were performed in constant-volume direct shear box (DSB) test. And, the deformation characteristics of the clay were also examined in order to evaluate the variation of stiffness during undrained shearing. It was found that the undrained strength increased with not only the shear rate but also the consolidation period. ISOTACH properties seemed a key to govern the undrained shear behavior.

• Smart Structures and Systems
• /
• 제1권2호
• /
• pp.217-233
• /
• 2005

Elastic and electromagnetic waves can be used to gather important information about particulate materials. To facilitate smart geophysical characterization of particulate materials, their fundamental properties are discussed and experimental procedures are presented for both elastic and electromagnetic waves. The first application is related to the characterization of particulate materials using shear waves, concentrating on changes in effective stress during consolidation, multi-phase phenomena with relation to capillarity, and microscale characteristics of particles. The second application involves electromagnetic waves, focusing on stratigraphy detection in layered soils, estimation of void ratio and its spatial distribution, and conduction in unsaturated soils. Experimental results suggest that shear waves allow studying particle contact phenomena and the evolution of interparticle forces, while electromagnetic waves give insight into the characteristics of the fluid phase and its spatial distribution.

• 공업화학
• /
• 제23권5호
• /
• pp.480-484
• /
• 2012

구조재료로 사용되는 콘크리트란 시멘트, 모래, 자갈과 같은 고형분들이 물에 분산되어 있는 복합물질이다. 수중에 콘크리트 몰탈을 타설할 때, 점탄성 특성이 우수하면 재료 분리가 적고, 물에 쓸려 내려가는 성질이 적고, 또 콘크리트가 잘 충진되어 강도가 강화될 수 있다는 점에서 콘크리트의 레올로지 물성은 매우 중요하다. 본 연구에서는 음이온 계면활성제, 양이온 계면활성제, 고분자계 증점제의 사용에 따른 콘크리트 첨가제의 최적 혼합 비율을 알아보았으며, 콘크리트나 몰탈의 레올로지 물성의 변화와 수중불분리성에 대해 연구하였다. 음이온과 양이온 혼합계면활성제를 사용하는 pseudo-polymeric system을 적용한 콘크리트는 고점성이면서 수중불분리성은 우수하지만 펌핑성이 떨어지지만, 여기에 poly methyl vinyl ether (PMVE)를 소량 첨가하면 오히려 점도는 감소되면서 점탄성이 증가되고, 흐름성이 우수하며, 수중불분리성, 펌핑성 및 콘크리트 충진성이 향상되었다.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.289-297
• /
• 2019

Indiscriminate disposal of waste and citation of open dumpsites are some of the key factors affecting the various soil geotechnical properties. Atterberg limit and consolidation tests were conducted to determine the effects of two open waste dumpsites (Uselu Market and New Benin) on geotechnical properties of their underlying soils. Soil sample collected from Uselu Market dumpsite in Benin City metropolis showed slightly lower hydraulic conductivity (K) of $1.0{\times}10^{-6}$ with plasticity index of 18.53% compared to sample collected 1.6 m from the same dumpsite which had high K value of $2.42{\times}10^{-3}$ with plasticity index of 6.9%. Soil sample collected from New Benin dumpsite in Benin City metropolis showed slightly lower K of $1.45{\times}10^{-6}$ with plasticity index of 13.8% than sample collected 1.6 m from the same dumpsite which had high K value of $2.14{\times}10^{-2}$ with plasticity index of 6.0%. X-ray florescent analyser (X-MET 7000) and direct soil pH meter were used to determine the composition of the aforementioned soil samples. The result of samples collected from both dumpsites indicated a low hydraulic conductivity compared to samples collected 1.6 m from both dumpsites. Also, the chemical composition and pH of both dumpsite underlying soils indicated high level of soil contaminants with pH of 3.3 and 3.5 which is very acidic unlike pH of other samples which were in the neutral range (6.8-7.1). Hence, a liner is recommended for all dumpsites or engineered landfill systems to mitigate against the challenges associated with open waste dumping system in the environment.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제13권1호
• /
• pp.13-23
• /
• 2008

오염물질로 오염된 퇴적점토의 강도, 변형 및 투수특성 변화를 파악하기 위하여 NaCl 수용액과 매립장 침출수를 시료의 간극수(포화수)로 교체하여 삼축압축시험과 압밀시험을 수행하였다. 또한, 채취된 점토시료의 화학적 특성을 규명하기 위하여 주사전자현미경(SEM) 관찰과 에너지분산분광(EDX) 분석이 수반된다. 화학성분 분석결과 O, C, Si, Al, Fe 크기 순의 구성비가 얻어졌으며, 삼축압축시험 및 압밀시험결과는 NaCl의 농도가 증가할수록 극한응력(강도)은 증가하고 압축성과 투수성이 커지는 경향을 보이는데, 이는 전해질의 농도가 증가할수록 확산이중층(DDL)의 두께가 감소되어 면모화되기 때문인 것으로 판단된다. 또한, 점토 차수재를 투과한 침출수가 지하수 오염에 미치는 영향을 분석하기 위하여 MT3D 해석모델이 이용되었으며, 지하수 오염거동 해석결과 초기 염소이온 농도가 클수록 측정농도도 커지며, 시간경과에 따라 지하수 오염농도는 비선형적으로 증가되었다. 지하수 오염농도 감쇄 관계식을 유도하여 지하수 오염 이동거리를 예측한 결과, 초기농도가 클수록 지하수 오염 이동거리도 크게 나타났다.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• 보존과학회지
• /
• 제27권4호
• /
• pp.357-369
• /
• 2011

봉암사 정진대사원오탑(보물 제171호)은 고려시대의 부도탑으로 장석 반정을 갖는 우백질화강암으로 구성되어 있다. 주요 조암광물은 조립과 세립의 석영, 장석, 운모 등이며, 부재는 암편탈락, 결실, 박리 및 박락 등의 물리적 풍화가 진행되어 있다. 이 탑의 전면에 걸쳐 적외선열화상분석을 실시한 결과, 균열이 발생한 부분을 중심으로 내부 박리 및 박락도 심한 것으로 나타났다. 표면 변색 부위에 대해 P-XRF 측정 결과, 암흑색, 황갈색 및 회백색 변색이 발생된 지점을 중심으로 Fe, S, Ca, Mn의 농도가 높게 나타났다. 또한 적색 안료의 피복흔적이 있는 부분은 Fe의 함량이 신선한 부분보다 5배 높게 측정되었으며, 적철석을 원료로 하는 안료를 사용한 것으로 해석된다. 부재의 초음파속도는 1,350~1,400 m/s로 모든 방위에서 유사한 값을 나타냈으나 박리, 박락 및 균열이 발생한 부분은 1,000m/s 이하의 값을 보였다. 따라서 풍화가 심해 물성이 약해진 부위와 균열대는 강화처리 및 재접합이 필요하며, 접합 부위가 넓은 암편은 강화처리를 선행해야 할 것으로 판단된다.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.17-23
• /
• 2006

Paper has fibers and fines network structure and it is strongly affected by interface bond-ing between fibers. Paper structural properties can be determined depending on the inter-fiber bonding. Fines play an important role in Campbell and consolidation effect through wet pressing and drying operations. The fines are essential for the formation of bonds between fibers and for the improvement of strength properties of papers. Since the fines are components of the pulp, there are always two factors to be considered: the quality and quantity of the fines. The quality of fines might be a potential variable to give a more accurate picture of the papermaking potential of the pulp. The object of this study is to investigate the effect of different types of pulp fines on the properties of paper and to access the potential of fines for controlling the bulk of paper. Refined Sw-BKP, Hw-BKP and BCTMP fines were used to investigate the fines effect. Wet-web strength, breaking length, scattering coefficient, and hydrodynamic specific volume, and drying shrinkage were measured. According to the results, chemical and morphological compositions of fines do not strongly affect to wet-web forming by their similar Campbell effect, but strongly affect to drying operation which forms hydrogen bonding among fiber-fines-fiber matrixes. Paper bulk should be controlled by the extent of hydrogen bonding between fibers during drying operation.