• 대한토목학회논문집
• /
• 제28권6C호
• /
• pp.321-329
• /
• 2008

본 연구에서는 전통적인 압밀촉진공법의 단점을 보완하기 위한 방법으로 석션보드드레인 공법을 제안하고, 본 공법의 개량특성을 파악하기 위해, 배수재 종류 및 단계 진공압 조건에 따른 일련의 Column 실험을 실시하였다. 이때 실험 간 발생되는 침하량과 실험 종료 후 발생된 함수비 저감효과 및 강도증진효과를 파악하고, 개량 기간에 따른 압밀도를 파악하여 각 조건에 따른 최적의 석션보드드레인 공법 영향인자를 산정하고자 하였다. 각 배수재(포켓식 성곽형, 코일형, 하모니카 형, 원형 및 열융착식 성곽형배수재) 종류에 따른 개량 효과를 파악하기 위한 실험 결과, Core 형상(원형, 판형)과 필터의 Core 부착 여부(포켓식, 열융착식)에 의해 열융착식 성곽형 배수재와 포켓식 원형배수재의 배수효율이 다른 배수재의 경우 보다 좋게 나타났다. 단계석션압 조건 실험의 경우 최종 단계석션압인 $-0.8\;kg/cm^2$으로의 기간이 짧을수록 개량도가 크게 나타났다. 또한 각 석션압 단계 별 압밀도-적용기간 곡선 상의 변곡점을 이용하여 압밀효과를 극대화 시킬 수 있는 적용기간을 산정할 수 있었다.

• 한국지반공학회지:지반
• /
• 제5권2호
• /
• pp.45-56
• /
• 1989

정규압밀 점성토의 응력-변형 거동은 응력경로에 의하여 어떠한 영향을 받게 되는가를 규명하기 위하여, 실험실에서 인위적으로 압밀한 Kaolin정성토 공시체를 사용하여 현위치 응력상태인 연. 응 역상태로 압밀하고, 여러가지 서로 다른 응력경로를 따라 삼축추축 배수시험을 행하였다. 그 결과, 응력증가비가 특정한 값, 곧 임계응력증가비를 가질 때 응력-변형 거동은 거의 녹형의 형태로 나타나고, 그 이상이 되면 응력의 증가와 더불어 재료의 성질이 강화되는 변형경화 현상을 나타내고 있음을 알 수 있었다. 본 연구에서는, 이러한 변Wi초화 현상을 보이는 응력-변형 거동을 Drnevich의 쌍유선 함수의 개념을 적용하여 모델화 하였으며, 이를 축대칭 하중을 받고있는지반의 응력경로를 고려한 여밀침하 계산에 적용하는 방법을 제시하였다.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.79-97
• /
• 2017

Natural clays exhibit features such as structural and anisotropy. In this work, a constitutive model that is able to replicate these two salient features of natural clays is presented. The proposed model is based on the classical S-CLAY1 model, where the anisotropy of the soil is captured through the initial inclination and rotation of the yield surface. To account for the structural of the soil, the compression curve of the reconstituted soil is taken as the reference. All parameters of the proposed constitutive model have clear physical meanings and can be conveniently determined from conventional triaxial tests. This proposed model has been used to simulate the behavior of soft soil in the undrained triaxial tests and the performance of Murro embankment in terms of settlement and horizontal displacements during embankment construction and consolidation stage. Results of numerical simulations using proposed model have been compared with the field measurement data. The comparisons show that the two features significantly influence the prediction results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.87-94
• /
• 1999

Sand drain as a vertical drainage is widely used in soft ground improvement. Recently, sand, the principal source of sand drain, is running out. A laboratory model test was carried out to utilize gravel as a substitute for sand. Though which the characteristics of gravel are compared to those of sand for engineering purpose. Two cylindrical containers for the model test were filled with marine clayey soil from the west coast of Korea with a column in the center, one with sand, the other with gravel. Vibrating wire type piezometers were installed at the distance of 1.0D, 1.5D and 2.0D from the center of the column. D is the diameter of the column. The transient process of pore water pressure with loading and the characteristics of consolidation were studied with the data gained from the measuring instrument place on the surface of the container. The parameter study was performed for the marine clayey soil before and after the test in order to check the effectiveness of the improvement. The clogging effect was checked at various depth in gravel column after the test. According to the test, the settlement was found to be smaller in gravel drain than in sand drain. The increase in bearing capacity by gravel pile explains the result. The clogging effect was not found in gravel column. As a result, it is assumed that gravel is relatively acceptable as a drainage material.

• 한국농공학회지
• /
• 제31권3호
• /
• pp.70-80
• /
• 1989

In this research program special triaxial compression tests and dehydration-swelling tests under the condition of freeze-thaw process were conducted to show the effects of freezethaw process on the physical properties of weathered granite soil, and their results as follows; 1.Consolidation settlement of weathered granite soil mass was increased due to freeze-thaw process, and the initial tangent coefficient of dense state was higher than that of loose state. 2.Compression behaviour of soil was increased according to the decrease of freezing temperature, and when the freezing temperature was reached under - 10$^{\circ}$C, the compression rate was not influenced by change of freezing temperature. 3.The experiments showed that the void ratio and permeability of soil were converged into their values of shrinkage limit, and the permeability was higher due to the freeze-thaw process and as the lower the freezing temperature. 4.The decrease of liquid limit was indicated as the lower the freezing temperature, and as more the freeze4haw cycles, the moisture content was shown the lower side. 5.It was shown that the shrinkage was decreased by freeze-thaw process and not influenced by way of freezing temperature, but dehydration rate was higher.

• 한국농공학회논문집
• /
• 제55권5호
• /
• pp.9-16
• /
• 2013

This study finds the characteristics of long-term settlement of Bottom Ash and to review the application of Singh-Mitchell creep equation and Burgers Model to the creep behavior of Bottom Ash. In the undrained state, it was confirmed that creep behavior appeared in the range to 30-80 % of the maximum deviator stress by applying condition in other three stresses through triaxial compression test after isotropically consolidation. By using sieve analysis, it was compared to each sample that was passed through 9.5 mm, 2 mm, 0.25 mm sieves. Also, using Singh-Mitchell creep equation and Burgers Model, it was compared between the theoretical behavior and the observed behavior for each sample. In the result, it is found that creep behavior of Bottom Ash is similar to the theoretical behavior of Singh-Mitchell creep equation and Burgers Model in early stage and it is possible to predict creep behavior of Bottom Ash by these models.

• 산업기술연구
• /
• 제22권B호
• /
• pp.191-197
• /
• 2002

This paper is experimental and numerical research results of performing centrifuge model tests to investigate the geotechnical engineering behavior of slag compaction pile as a substitute of sand compaction pile. In order to find the geotechnical engineering characteristics of the soft clay and the slag used in centrifuge model experiments, basic soil property tests, consolidation test, permeability tests and triaxial compression tests were performed. For centrifuge model tests, slags with changing relative density were used and their bearing capacity, stress concentrations in between pile and soft clay, settlement characteristics, and failure modes were investigated. As a results of centrifuge model tests, it was found that the bearing, capacity of model was increased with increasing density of slag pile and general shear failures were occured. Miniature soil pressure gauges were installed on model pile and soft ground respectively and thus vertical stress acting on them were measured. Stress concentration ratio was found to be in the range of 2.0~3.0. Bearing capacity obtained from the model test with slag was greater than that from the model test with a sand having the identical layout to each other. Thus it was confirmed the slag was an appropriate substitution of pile for sand.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.253-261
• /
• 2003

샌드드레인공법(SD공법)이나 고치환율의 샌드콤팩션파일공법(SCP공법)과 비교하여 저치환율SCP공법에 의해 개량된 복합지반의 역학거동은 모래말뚝과 점토지반 양방의 역학적 상호작용의 영향을 보다 현저하게 받는다. 따라서 본 공법의 적용에 있어서 침하저감효과나 모래말뚝 사이의 점토의 강도증가 등을 정확히 평가하기 위해서는 복합지반 내부에서의 모래말뚝과 점토와의 역학적 상호작용을 해명하여야 할 필요성이 있다. 본 연구에서는 저치환율의 모래말뚝이 타설된 복합지반에 대한 일련의 모형실험을 통하여 압밀중에 발생되는 모래말뚝과 점토 각각의 역학거동과 복합지반 내부에 대한 응력분담거동에 대하여 고찰하였다.

• Structural Engineering and Mechanics
• /
• 제33권5호
• /
• pp.635-647
• /
• 2009

For the calculation of foundation settlement it is recommended to take into account so called influence zone inside the subsoil bellow the foundation structure. Influence zone inside the subsoil is the region where the load has a substantial influence on the deformation of the soil skeleton. The soil skeleton is pre-consolidated or over consolidated due to the original geostatic stress state. An excavation changes the original geostatic stress state and it creates the space for the load transferred from upper structure. The theory of elastic layer in Westergard manner is selected for the vertical stress calculation. The depth of influence zone is calculated from the equality of the original geostatic stress and the new geostatic stress due to excavation combined with the vertical stress from the upper structure. Two close formulas are presented for the influence zone calculation. Using ADINA code we carried out several numerical examples to verify the proposed analytical formulas and to enhance their use in civil engineering practice. Otherwise, the FEM code accuracy can be control.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.692-701
• /
• 2009

The use of vertical drain method to improve the soft soil ground has been continuously increased in Korea such as Busan New Port, Saemangeum reclamation project and so on in Korea. Especially PBD(Plastic Board Drain), one of the vertical drain, has been widely used due to the economic feasibility, construction compatibility and quality control. However in case of using PBD, discharge capacity reduction caused by creep deformation of the PBD filter, bending, kinking and so on can be occurred. Therefore the purpose of this study is to solve these problems by developing Deformation-Compatible Vertical Drain, DCVD which allows to deform with consolidation settlement without bending and kinking of vertical drain. In order to investigate the performance of DCVD developed in this study, discharge capacity test, centrifuge model test and complex discharge capacity test for both PBD and DCVD are performed and the results are compared.