• 대한인간공학회지
• /
• 제27권2호
• /
• pp.39-47
• /
• 2008

This research was conducted to explore relationships among situation awareness, presence, and performance on a handheld game console. Situation Awareness was measured by SAGAT (Situation Awareness Global Assessment Technique) while presence was measured by PQ (Presence Questionnaire) version 3.0. The performance was measured by the number of aircraft shot down during the flight simulator game. The results show that both situation awareness and presence were positively significantly correlated with performance. In order to investigate the effect of performance level, subjects were divided into two significantly different groups: low and high performance groups. In the low performance group, both situation awareness and presence showed a significantly positive correlation with performance. The correlation between presence and situation awareness also showed a positively significant correlation. However, in the high performance group, there were no significant correlations among them. In conclusion, different performance levels could be said to be an important factor in the study of situation awareness and presence. Furthermore, this study also proved that the domain of research on situation awareness and presence was extended to small displays such as the handheld game console.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.8-14
• /
• 2016

Medical bed head consoles (BHC) are generally used to increase the efficiency of medical equipment and speed the medical treatment response time. The BHC design has been consistently improved including a movable shelf unit that is embedded to mount stably medical instruments on the lower part of the main console. The cost of a BHC can be reduced through design optimization to limit the overall weight. However, as the size of a head console might decrease due to design optimization, the BHC deflection could be increased. In this study, multi-objective optimal design was adopted to consider this BHC design problem. In order to reduce the cost of optimization planning, an approximate model was applied for the design optimization. In the context of approximate optimization, we used the response surface method and non-dominant sorting genetic algorithm developed from various fields. Multi-objective optimal solutions were also compared with a single objective optimal design.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.805-811
• /
• 2016

Prior to installation in a navy ship, shipboard equipment should be qualified by shock test requirements. The multi-function console mounted on the elastic platform of the ship should also withstand given shock loads. In this study, both real shock test methods, as well as numerical computer simulations using the finite element method were used to verify structural durability under shock load conditions. First, we used domestic test facilities to perform possible shock tests, including an impact hammer test, a drop table test and a shaker shock test. Full model tests satisfying the shock response spectrum level were performed. Thereafter, an analytical model of the complex console structure was built by the finite element method. Finally, numerical results were verified by modal test results of the real product and an FEA analysis was also performed with a full model transient response analysis.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.466-473
• /
• 2021

Fire protection is one of important issues to ensure safety and reduce risks of nuclear power plants (NPPs). While robust programs to shut down commercial reactors in any fires have been successfully maintained, the concept and associated regulatory requirements are constantly changing or strengthening by lessons learned from operating experiences and information all over the world. As part of this context, it is necessary not only to establish specific fire hazard assessment methods reflecting the characteristics of research reactors and educational reactors but also to make decisions based on advancement encompassing numerical analyses and experiments. The objectives of this study are to address fire simulation in the control room of an educational reactor and to discuss integrity of digital console in charge of main operation as well as analysis results through comparison. Three electrical fire scenarios were postulated and twenty-four thermal analyses were carried out taking into account two turbulence models, two cable materials and two ventilation conditions. Twelve supplementary thermal analyses and six subsequent structural analyses were also conducted for further examination on the temperature and heat flux of cable and von Mises stress of digital console, respectively. As consequences, effects of each parameter were quantified in detail and future applicability was briefly discussed. On the whole, higher profiles were obtained when Deardorff turbulence model was employed or polyvinyl chloride material and larger ventilation condition were considered. All the maximum values considered in this study met the allowable criteria so that safety action seems available by sustained integrity of the cable linked to digital console within operators' reaction time of 300 s.

• 전자공학회논문지C
• /
• 제35C권10호
• /
• pp.1-11
• /
• 1998

본 논문은 핵자기 공명신호를 검출하기 위하여 자석상자 내에 한 개의 코일을 가진 펄스방식의 핵자기 공명장치에 대한 새로운 구현방법에 관한 것이다. 수소 원자핵의 Larmor 주파수가 5MHz가 되도록 설계된 자석상자에 5MHz 고주파 자기장을 인가하여 자석상자 내에 투입된 글리세린 시료로부터 수소 원자핵의 공명신호를 얻었다. 자석상자 내의 정자기장은 자기장의 세기가 1168 gauss인 영구자석을 사용하여 만들었으며, 고주파 자기장은 5MHz의 주파수를 가지며 전류의 크기가 8A인 고주파 신호를 5.73μH의 코일에 인가하여 발생시켰다. 고주파 자기장의 발생시간을 2.8μsec로 하였을 때 핵자기 공명신호는 최대 크기로 나타났으며, 반복 검출을 하기 위하여 고주파 자기장의 발생주기를 100msec로 설계하였다. 시료에서 발산되어 자석상자 내의 코일에 감지되는 핵자기 공명신호는 Larmor 주파수와 같은 주파수를 가지는 신호가 진폭변조된 형태로 나타났다. 코일에 감지된 신호를 송수신 분리회로와 전치증폭기 및 중간증폭기에서 각각 20.7dB, 36dB 및 40dB로 증폭하고 동기검파회로에서 검파하여 핵자기 공명신호를 얻었다.

• ETRI Journal
• /
• 제4권3호
• /
• pp.55-61
• /
• 1982

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2006년도 학술발표대회 논문집
• /
• pp.380-380
• /
• 2006

• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.71-78
• /
• 2011

This paper contains the selection of operation parameters for protection and control of steam turbine in a Korea Standard Type Nuclear Power Plant. The safety of nuclear reactor must be ensured which generates nuclear energy and produces steam. Also, the safety of turbine, which consume the nuclear energy as a core machine, must be ensured. For the purpose of this, we describe how the operating parameters were selected, reviewed, implemented into the operator console and finally put into actual operation of the system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1555_1556
• /
• 2009

전자기기에서 외부 Console로 사용되는 Touch Pad의 입력오류를 줄이기 위해서는 안정된 전원의 공급이 필요하다, 전원에서 발생하는 노이즈는 PDN(Power Delivery Network)의 임피던스에 의해서 발생하며, 이들 노이즈를 줄이기 위해서는 decoupling capacitor의 적절한 수량과 위치를 선정하여, PDN의 임피던스를 최소화해야 한다. 본 논문에서는 임피던스의 최소화를 위해서 Full-wave 시뮬레이션을 이용해서 임피던스 특성을 분석하고, VNA(Vector Network Analyzer)를 이용하여 주파수에 대한 PDN 임피던스를 측정하고, Touch Pad 구동용 지그를 이용해서 Time Domain에서의 임피던스 저감에 따른 노이즈 특성을 분석 비교하였다.

• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.529-535
• /
• 2011

Indoor noise is very important related to the morale and fighting power of the crew as well as environmental condition for them in a navel vessel. Especially, the crew members working in CIC (combat information center) and sonar equipment room require much more quiet environment condition. One of the most serious noise source in CIC is the cooling fan noise installed in the console of the combat system. Therefore, in this paper, the design of the plenum chamber is studied to reduce the noise of the fan from these consoles by numerical analysis and experiment.