• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.21-33
• /
• 1992

Under the intense-impulsive loading, structures are subjected to the wide range of pressures at an instantaneous time. The constitutive laws capable to describe the material behavior under the extreme pressure as well as the low pressure are necessary for the analysis of the structural behavior under the intense -impulsive loadings. In this study, two plastic models, the pressure independent Von-Mises model and the pressure dependent Drucker-Prager model, are employed for the wave propagation analysis. Governing equations of this study are conservation equations of momentum and mass in Lagrangian coordinate system which is fixed to the material. Due to the shock-front which violates the continuity assumptions inherent in the differential equations numerical artificial viscosity is used to spread the shock front over several computational zones. These equations are solved by Finite Difference Method with discretized time and space coordinates. The associate normality flow rule as a plastic theory is implemented to find the plastic strains.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.4
• /
• pp.135-146
• /
• 2009

Urban forest area in South Korea has been increased up to 20.8% of national land as of 2007 by the mergence of municipalities and counties. The rate of park and green tract among urban forest averages out to about 4% nationally but the Capital, Seoul, almost 105% level, not easy to split the two. Park and green has positive management system because of its infrastructure attribute and relevant security obligation standard while urban forest left alone with no such concerns. The most important reason of the negligence comes from institutional inertia although it is possible to be managed functionally by forest laws as like forests of park, landscape, wind and noise protection, and timber product. As a results, it reaches below than 92.64% of the national average level of the timber stockpile especially in the metropolitan areas and loses broad acres rapidly due to the easy conversion system to the urban land usage. Therefore, there must be required some alternative methodologies to conserve and foster it. The paper proposes the four urban forest management types and their control methods. The four types divide into conservation, foster, development, and reservation ones. Also it suggests the five furtherance tract types with the combination among the four earlier types, optionally having one of the six aim climaxes and recommends the standardization of operation design. The total green quantity index of urban forest also suggested by the weight method according to location and DBH class. The case study of the suggested model was executed on the Daejon Metropolitan area and its index calculated as 110.4% level compared with the acreage.

• Ecology and Resilient Infrastructure
• /
• v.5 no.1
• /
• pp.45-53
• /
• 2018

Ecological networks can be generally classified into core areas, buffer zones, and corridors. Particularly, buffer zones connect core areas or ecological corridors, and preserve ecological network by reducing the impact from outside. We examined related laws and researches about buffer zone establishment associated with the resources of high ecological and conservation value to find out more researches are needed. In this study, we investigated various examples of the criteria for establishing buffer zones at domestic and overseas. Based on the results of railway environmental impact assessment and railway construction guidelines, we analyzed the application methods applicable to the railway development area and proposed the criteria to evaluate land cover status, species diversity, rarity, and connectivity. Through this study, the environmental and ecological value around the development area of the railroad was examined to reduce the environmental damage from railroad construction.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.81-89
• /
• 2014

Tandem-ejector has been devised for engine-bay cooling. In this study, 1-D model has been developed to analyze Tandem-ejector. In the model, the primary, the secondary and the tertiary flow conditions have been analyzed with isentropic process. The mixing process has been analyzed with conservation laws based on the control volume analysis. The total pressure loss of the primary flow has been analyzed under the matching condition between the static pressure of Tandem-ejector discharge flow and atmospheric pressure. Consequently, 1-D model can predict Tandem-ejector performance accurately and provide the performance map.

• Journal of Forest and Environmental Science
• /
• v.29 no.3
• /
• pp.237-248
• /
• 2013

The legal basis for the systematic prevention and response to landslide hazards, and the rehabilitation of landslide-hit areas, was established through the amendment of the Forest Protection Act in August 2012. The most noticeable amendment to the Act is the inclusion of clauses associated with the designation and management of landslide-prone zones (including debris flow-prone zones). In this paper, we (1) introduce the clauses related to the designation and management of landslide-prone zones that were included in the amended Forest Protection Act, (2) examine their significance by reviewing the present status of related domestic laws and structural countermeasures such as sediment check dams for sediment-related disaster prevention, and (3) suggest the future directions of the procedure for the designation and cancellation of such zones, and their maintenance and institutional aspects. The establishment of an institutional device for the designation and management of landslide-prone zones has great significance in the aspect of (1) the establishment of a comprehensive management and prevention system for potential landslide-prone zones in forested areas where the hazard risk has been poorly recognized as compared with the flood risks in lowlands, and (2) the establishment of the basis for overcoming the limits of structural countermeasures according to limited budgets. To develop the designation and management system for landslide-prone zones, not only must present problems be addressed, but a cooperation system between the administration and local residents must also be established.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.1
• /
• pp.73-87
• /
• 2012

This study was conducted to provide sustainable measures for conservation and management to protect valuable natural/ecological resources, offer differentiated quality assurance services for eco-tourism products, and explore measures for eco-tourism certification/designation systems. To achieve its goals, the study discussed domestic and overseas trends and literatures that concern eco-tourism certification/designation system and investigated case studies that were presently operational. A group of experts and a group of non-experts were surveyed separatedly to investigate the awareness of the national eco-tourism certification/designation system. The results from the investigation indicate that Europe, since the late 1990s to early 2000, has actively introduced a system that establishes and operates a dedicated institution, and European members have created a cooperation framework to formulate international partnerships and develop standardized assessment benchmarks to adhere to the goals of the system, the period for certification was designated from one year to five years, and renewals were granted based on periodic monitoring and reassessment. In Korea, from early 2000, the Ministry of Culture, Sorts and Tourism and other organizations have certified product quality and assessed travel products and national park tour programs. The certification period was established to be set between one and three years, and the vast majority were not reassessed. Upon investigating the results for awareness of national eco-tourism certification/designation system, a high number of respondents agreed with the need to establish a eco-tourism certification/designation system (90% of respondents), and the respondents cited eco-tourism quality assurance, conservation of value, means to maintain established institutions, and environmental education and information as reasons for needing a certification/designation system. In Korea, a certification/designation system for the eco-tourism industry is presently in operation, but the system regulates target institutions based on their characteristics. Therefore, this study proposes its suggestions via various categories, including designated institutions, designated purpose, designated subjects, designated organization, laws, regulations, and incentives.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.94-103
• /
• 2017

Surface soil is one of the most important resources that have many functions for human needs such as conservation of water resource, purification of contaminated materials, and productivity of food or energy. However, the surface soil is a limited resource that cannot be recovered readily for a long time once it is lost by erosion. In Korea, the Ministry of Environment enacted the notification on the investigation of surface soil erosion and corresponding countermeasures. As the results, database of soil quality assess criteria (biomass, groundwater recharge, habitat, carbon storage, buffer, and soil loss) was established, and the web-based system that can evaluate surface soil conditions was developed. However, non-experts have difficulties in using the system because the system requires in-depth knowledge about soil qualities. In this study, the Web Geographic Information System (GIS) watershed-based surface soil information system was developed to improve usability of the system and accessibility of soil quaility database. The system provides the current condition of surface soil characteristics and GIS-based soil data at selected locations. The users are able to download soil quality data in different districts, watersheds, and special regions allocated by TauDEM module. The system developed in this study would valuable surface soil information for studies of soil quality and its environmental effects, and thereby contributing to establishing more appropriate and robust soil conservation laws.

• Journal of dental hygiene science
• /
• v.20 no.4
• /
• pp.230-244
• /
• 2020

Background: The objective of the present study was to specifically divide the various work performed by dental hygienists in clinical practice for legal amendments regarding problems associated with conflict between job roles and illegal delegation to establish key basic data for legislation and policy utilization for realization of legal scope of dental hygienists. Methods: The study used work reports drafted based on research methods in the "Second Job Analysis Report on Dental Hygienists" researched by the Korean Health Personnel Licensing Examination Institute in 2012 and "Opinions of Dentists on Actual and Legal Work of Dental Hygienists," a report published by the Korean Dental Hygienists Association. Of these, the study focused on conservation dentistry, pediatric dentistry, prosthodontics, oral and maxillofacial surgery, and dental implant treatment, which make up some of the fields covered by dental hygiene practice, to investigate and analyzed work performed by clinical experience. Results: Analysis of work actually performed in dental practice showed that for work related to 33 items presented in the study methods, the participants responded that they are currently performing such work or are likely to perform such work in the future, although there were differences by year. Investigation by type of workplace showed that dental hygienists working in university hospitals could perform the work presented if they had ≥5 years of dental hygienist experience, whereas dental hygienists working in dental clinics or hospitals could perform simple duties in their first year and performed more diverse duties with greater degree of difficulty after their second to fourth year. Conclusion: The reality that medical assistance during surgical operations and various procedures that is still being performed is no longer legally protected directly contradicts the needs in dental practice, and thus, there is the need to amend laws that are realistic by clearly recognizing the work of dental hygienists.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.4
• /
• pp.419-425
• /
• 2015

In this study, a new idea for developing a space scale for measuring mass in a microgravity environment was proposed by using the inertial force properties of an object to measure its mass. The space scale detected the momentum change of the specimen and reference masses by using a load-cell sensor as the force transducer based on Newton's laws of motion. In addition, the space scale calculated the specimen mass by comparing the inertial forces of the specimen and reference masses in the same acceleration field. By using this concept, a space scale with a capacity of 3 kg based on the law of momentum conservation was implemented and demonstrated under microgravity conditions onboard International Space Station (ISS) with an accuracy of ${\pm}1g$. By the performance analysis on the space scale, it was verified that an instrument with a compact size could be implemented and be quickly measured with a reasonable accuracy under microgravity conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.4
• /
• pp.306-315
• /
• 1992

This paper addresses performance analysis of a reciprocating compressor. A computer simulation model has been developed to predict and estimate the compressor performance. Instead of using ideal gas equations, real gas equations are used in describing the state of gas. The compressor simulation model consists of a cylinder control volume, suction system and discharge system. Conservation laws of mass and energy are applied to the cylinder section only, The suction and discharge system are described by the Helmholtz resonator modeling. Some of input data required for the simulation have been obtained from experiments. These experimentally obtained input data are effective flow area, effective force area and dynamic characteristics of valves. Simulation results of real gas equations have been compared with those of ideal gas equations. It has been found that the simulation with real gas equations yields lower cylinder temperature and heat transfer compared with those of ideal gas equations. Differences in pressure, mass flowrates, valve motions and gas pulsations are found quite small.