• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.445-455
• /
• 2020

Shear lag phenomenon has long been taken into consideration in various structural codes; however, the AISC provisions have not proposed any specific equation to calculate the shear lag ratio in some cases such as fillet-welded connections of front-to-front double channel sections. Moreover, those equations and formulas proposed by structural codes are based on the studies that were conducted on riveted and bolted connections, and can be applied to single channel sections whilst using them for fillet-welded double channels would be extremely conservative due to the symmetrical shape and the fact that bending moments will not develop in the gusset plate, resulting in less stress concentration. Numerical models are used in the present study to focus on parametric investigation of the shear lag effect on fillet-welded tension connection of double channel section to a gusset plate. The connection length, the eccentricity of axial load, the free length and the thickness of gusset plate are considered as the key factors in this study. The results are then compared to the estimates driven from the AISC-LRFD provisions and alternative equations are proposed.

• 한국전자파학회논문지
• /
• 제25권2호
• /
• pp.223-234
• /
• 2014

본 논문은 위성통신 시스템에서 OTM(On-The-Move: 이동형) 위성단말이 운용되는 지역의 채널 특성을 분석한 결과를 다룬다. 무궁화 5호 위성의 20 GHz 대역 수신 신호를 이용하여 대전~대천까지 실 주행시험을 수행하였고, 측정 결과를 고속도로 환경과 국도 환경 두 부분으로 구분하여 통계적 분석을 수행하였다. 통계적 분석에는 확률밀도 함수와 Markov 모델을 이용하여 위성 채널의 특성을 분석하였고, 더불어 국도 환경과 고속도로 환경에서 수신 전력의 임계값 설정에 따른 ACD(Average Connection Duration), AFD(Average Fade Duration), LCR(Level Crossing Rate)을 각각 제시하고, 서로 비교하였다.

• 인터넷정보학회논문지
• /
• 제12권4호
• /
• pp.45-50
• /
• 2011

본 논문에서는 차량용 다중 카메라시스템에서 무선영상을 전송하기 위해 FH/TDD(Frequency Hopping/Time Division Duplex) 기반의 Motion JPEG 영상압축 코덱의 부호화 지연시간을 분석한다. 또한, Motion JPEG기반으로 FH/TDD에 의한 다중접속을 위해 시분할 시에 상호 동기화된 채널이동 과 접근방식(Synchronized shift & access)이 가능하도록 채널의 상태를 파악한 후, 채널충돌(Channel Collision)을 최소화하기 위한 동기화 연결(Synchronized connection) 방식을 설계한다.

• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.29-34
• /
• 2009

MPEG4 High Efficiency Advanced Audio Coding (HE-AAC) and MPEG Surround are one of the most efficient combinations for low bit rate multi-channel audio coding. Based on the fact that these two codecs have identical quadrature mirror filter (QMF) analysis and synthesis structures, we propose a dual-domain connection scheme for the codecs. Specifically two time-domain connection methods are analyzed and compared to the QMF subband-domain connection method. Experimental results show that both the time-domain connection methods cause no subjective sound quality degradation compared to the QMF subband-domain connection method, which verifies that one can select either of them depending on application scenarios.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.922-925
• /
• 2004

Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1052-1057
• /
• 2004

Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2255-2262
• /
• 2015

최근 저심도의 도시철도 시스템이 제안되어 지상고가 형식의 민원과 지하경전철 형식의 비경제성을 극복하기 위한 연구가 진행중이다. 본 연구에서는 저심도 지하구조물의 경제성과 시공성 확보를 위하여 가시설을 대체하는 프리캐스트 형식의 모듈식 구조체를 적용하기 위하여 영구 강성벽체와 상부 슬래브간 연결부 조인트에 대한 구조적 성능을 검증하고자 실내 재하실험을 수행하였다. 성능재하 실험결과, 가시설 대체 강성벽체와 상부 슬래브간 연결부 구조는 휨모멘트 전달구조임을 확인하였다. 특히 휨 지배를 받는 상부에서는 채널형태보다는 커플러 조합이 휨 저항 성능이 30%정도 증가하여 유리함을 확인하였으나, 성능 개선이 필요한 것으로 확인되었다.

• 한국IT서비스학회지
• /
• 제9권2호
• /
• pp.163-177
• /
• 2010

In this paper, we consider a channel ordering problem that seeks to maximize the service quality in mobile radio communication systems. If a base station receives a connection request from a mobile user, one of the empty channels belonging to the base station is assigned to the mobile user. In case multiple empty channels are available, we can choose one that incurs least interference with other channels assigned to adjacent base stations. However, note that a pair of channels that are not separated enough generates interference only if both channels are assigned to mobile users. That is, interference between channels may vary depending on the channel assignment sequence for each base station and on the distribution of mobile users. To find a channel assignment sequence that seems to generate minimum interference, we develop an optimization model considering various scenarios of mobile user distribution. Simulation results show that channel assignment sequence determined by the scenario based optimization model significantly reduces the interference provided that scenarios and interference cost are properly generated.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.437-448
• /
• 2020

In high rise buildings that utilize precast large panel system for construction, the shear wall provides strength and stiffness during earthquakes. The performance of a wall panel system depends mainly on the type of connection used to transfer the forces from one wall element to another wall element. This paper presents an experimental investigation on different types of construction detailing of the precast wall to wall vertical connections under reverse cyclic loading. One of the commonly used connections in India to connect wall to wall panel is the loop bar connection. Hence for this study, three types of wet connections and one type of dry connection namely: Staggered loop bar connection, Equally spaced loop bar connection, U-Hook connection, and Channel connection respectively were used to connect the precast walls. One third scale model of the wall was used for this study. The main objective of the experimental work is to evaluate the performance of the wall to wall connections in terms of hysteretic behaviour, ultimate load carrying capacity, energy dissipation capacity, stiffness degradation, ductility, viscous damping ratio, and crack pattern. All the connections exhibited similar load carrying capacity. The U-Hook connection exhibited higher ductility and energy dissipation when compared to the other three connections.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.132-138
• /
• 2012

VANET(Vehicular Ad-hoc Network)을 지원하기 위해 IEEE 802.11p 규격이 표준화 진행중에 있다. 802.11 MAC 프로토콜은 전송률에 관계없이 모든 노드들에 동일한 확률의 채널 획득 기회를 부여하므로, 전송률이 낮은 노드가 상대적으로 채널 점유시간이 길어져서 전송률이 높은 노드도 전송률이 낮은 노드의 전송률로 하향 평준화되는 문제와, 노드가 많아질 경우 충돌 확률이 높아지는 문제가 있다. 본 논문에서 제안하는 알고리듬은 일단 채널을 획득한 단말기가 다른 노드와의 채널획득 경쟁의 우위를 일정 기간 유지하는 알고리듬에, 현재 전송률에 따라 적절히 연속전송 한계값을 정하는 TXOP 개념을 더했다. CW의 폭을 표준보다 더 넓게 설정여 효과적으로 충돌을 회피하면서도 대기시간을 최소화하면서 또한 채널 점유 시간에 따라 연속전송 한계값을 다르게 정하는 방법을 통해 전체 네트워크의 향상을 보이고 있다.