• Journal of Information Processing Systems
• /
• v.7 no.4
• /
• pp.653-678
• /
• 2011

WiMAX is intended for fourth generation wireless mobile communications where a group of users are provided with a connection and a fixed length queue. In present literature traffic of such network is analyzed based on the generator matrix of the Markov Arrival Process (MAP). In this paper a simple analytical technique of the two dimensional Markov chain is used to obtain the trajectory of the congestion of the network as a function of a traffic parameter. Finally, a two state phase dependent arrival process is considered to evaluate probability states. The entire analysis is kept independent of modulation and coding schemes.

• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.112-122
• /
• 2004

In this paper, we propose a mobility estimation model based on inner regions in a cell and a dynamic resource reservation scheme which can control dynamically classes of mobile hosts on the mobile network. The mobility estimation model is modeled based on the reducible Markov chain. And the mobility estimation model provides a new hand off probability and a new remaining time for the dynamic resource reservation scheme. The remaining time is n estimated time that mobile hosts can stay in a cell. The dynamic resource reservation scheme can reserve dynamically a requested resource according to the classes of mobile hosts. This scheme can efficiently improve the connection blocking probability and connection dropping probability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.726-747
• /
• 2013

In order to support a large number of mobile stations (MSs) with statistical multiplexing in cellular networks, a random access scheme is widely used for uplink (UL) bandwidth request (BR). In the design of a random access based BR scheme, there are two important requirements: short connection delay and diverse Quality of Services (QoSs) support. Such requirements are crucial for IMT-Advanced systems like IEEE 802.16m to provide various types of fourth generation (4G) data services. IEEE 802.16m provides advanced UL BR schemes for non-real time polling service (nrtPS) and best-effort (BE) service to meet the requirements of short connection time and multiple QoS level support. In order to provide short connection time and multiple QoS support, three-step and differentiated BR procedures are adopted. In this paper, a novel modelling of IEEE 802.16m contention based BR scheme is proposed that uses a 2-dimensional discrete time Markov chain. Both the short access delay three-step BR procedures and normal five-step BR procedure are considered in the model. Our proposed model also incorporates the IEEE 802.16m differentiated BR procedure. With the proposed model, we extensively evaluate the performance of IEEE 802.16m BR for two different service classes by changing QoS parameters, such as backoff window size and BR timer. Computer simulations are performed to corroborate the accuracy of the proposed model for various operation scenarios. With the proposed model, accurate QoS parameter values can be derived for the IEEE 802.16m contention-based BR scheme.

• Journal of Sensor Science and Technology
• /
• v.18 no.2
• /
• pp.128-134
• /
• 2009

Integrated circuit of a new neuron chain with a synapse function for Hodgkin-Huxley model which is a good electrical model about a real biological neuron is implemented in a $0.5{\mu}m$ 1 poly 2 metal CMOS technology. Pulse type neuron chain consist of series connected current controlled single neurons through synapses. For the realization of the single neuron, a pair of voltage mode oscillators using operational transconductance amplifiers and capacitors is used. The synapse block which is a connection element between neurons consist of a voltage-current conversion circuit using current mirror. SPICE simulation results of the proposed circuit show 160 mV amplitude pulse output and propagation of the signal through synapses. Measurements of the fabricated pulse type neuron chip in condition of ${\pm}2.5\;V$ power supply are shown and compared with the simulated results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.1030-1050
• /
• 2021

The edges with "bridge characteristic" play the role of connecting the communication between regions in power optical cable network. To solve the problem of mining edges with "bridge characteristic" in provincial power optical cable network, the complex power optical cable network model is constructed. Firstly, to measure the generated potential energy of all nodes in n-level neighborhood local structure for one edge, the n-level neighborhood local structure topological potential is designed. And the minimum connected chain attenuation is designed to measure the attenuation degree caused by substituted edges. On the basis of that, the minimum connected chain attenuation topological potential based measurement is designed. By using the designed measurement, a bridge-edges mining algorithm is proposed to mine edges with "bridge characteristic". The experiments are conducted on the physical topology of the power optical cable network in Jilin Province. Compared with that of other three typical methods, the network efficiency and connectivity of the proposed method are decreased by 3.58% and 28.79% on average respectively. And the proposed method can not only mine optical cable connection with typical "bridge characteristic" but also can mine optical cables without obvious characteristics of city or voltage, but it have "bridge characteristic" in the topology structure.

• Structural Engineering and Mechanics
• /
• v.82 no.6
• /
• pp.735-745
• /
• 2022

The suspension thyristor valve can generate tremendous vertical acceleration responses in layers and large tension forces in hangers. A shaking table test of a scaled-down model of thyristor valves suspended on a hall building is performed to qualify the risk of vertical uplift of two representative types of valves, the chain valve and the rigid valve. Besides, an analytical model is established to investigate the source of the slackening of hangers. The test results show that the valves frequently experience a large vertical acceleration response. The soft spring joint can significantly reduce acceleration, but is still unable to prevent vertical uplift of the chain valve. The analytical model shows a stiffer roof and inter-story connection both contribute to a higher risk of vertical uplift for a rigid valve. In addition, the planar eccentricity and short hangers, which result in torsional motion of the valve, increase the possibility of vertical uplift for a chain valve. Therefore, spring joints with additional viscous dampers and symmetric layout in each layer are recommended for the rigid and chain valve, respectively, to prevent the uplift of valves.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.207-221
• /
• 2003

A hash chain is highly efficient, attractive structure to use in electronic cash. Previous systems using hash chain were, however, either credit-based vendor-specific cash or debit-based general-purpose cash which lacks efficiency due to double spending problem. In this paper, we propose a new divisible cash system using hash chain. This newly proposed cash is general-purpose, debit-based, anonymous, and offline. The efficiency of the system results from its capacity to pay variable amounts with no additional costs. A client always performs a single blind signature in the withdrawal phase, independent of the length of the chain. During payment, a client performs a single challenge-and-response or generates a single signature, independent of the amount paid. This system provides a new refund mechanism, which uses a refund ticket, that allows clients to refund the unspent part of the chain without revealing any connection to the spent part.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.353-362
• /
• 2016

As ships become larger and construction of offshore plants increases recently, the amount of outsourcing has increased accordingly in the shipyard. Consequently, the system integration in terms of SCM (Supply Chain Management) of information and material flows has become much more important. Especially, since the SCM in the shipbuilding industry is operated in accordance with the production planning in connection with design, purchasing and production process which are the main components of the supply chain, the best production plan has to be established over the whole scheduling activities from the long-term planning to the short-term planning. The paper analyzes the characteristics of the SCM and the production planning system and suggests the need and the direction of APS (Advanced Planning System) development specialized in the supply chain management only for shipbuilding industry. Furthermore, propose a new SCP-Matrix (Supply Chain Planning Matrix), which is the basis of the APS development, appropriate for the shipbuilding industry and draw the core function of the APS module for the practical production plan.

• Journal of the Korean Geographical Society
• /
• v.44 no.6
• /
• pp.723-744
• /
• 2009

The purpose of this paper is to clarify the prospects and problems in the study of geography related to the concept of commodity, transport, and supply chains. The geography studies related to commodity chains are expanded to each field of industry focusing on the subjects and economic difference which lead the commodity chain in core and periphery regions. These vertical connection are studied with the political economy approach that gives attention to geographical pattern of agricultural products and foods. But in viewpoint of commodity circuit and commodity network, the culture or subjects of micro regions and interaction are also studied. The contents of these study are to clarify the importance of cultural turn and local. And the study of chain standpoint appears that the series of transport process by transportation modes can be understood by transport chains and the physical distribution process of sea freight is to be grasped by supply chains.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.1
• /
• pp.27-38
• /
• 2023

How the port, shipping, shipbuilding, and vender industries in Korea can have a seamless value chain through their digitally smooth cooperation by applying the latest information and communications technology through the "4th industrial revolution" was examined. Also considered was the proposition that the value chain should be a smart, seamless value chain among industries with successful hyperconnection. Their cooperative relationships were defined, and the crucial elements for the sustainable development of these industries were considered. As a result, the direction for achieving environmental, social, and governance management by realizing decarbonization through today's digitalization could be studied. In particular, the importance of digitization as a way to respond to the future market from the perspective of small and medium-sized enterprises and the role of digitization realized by small and medium-sized equipment companies in the overall industry were examined. The results simultaneously show the state of linkage between industries and the reason why the value chain must maintain a smooth relationship. In addition, using the lessons learned from recent failure cases from the Korean shipbuilding industry as a cornerstone, the direction for creating a strategic pathway for intelligent connection was investigated.