• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.74-77
• /
• 1998

We consider connection-oriented wireless cellular networks. These networks employ dedicated radio channels for the transmission of signaling information. A forward signaling channel is a common signaling channel assigned to carry the multiplexed stream of paging and channel allocation(virtual circuit allocation) packets from a base station to mobile stations. The delay levels experienced by paging and channel allocation packets have serious effect on the utilization level of the limited radio channel capacity. While a slotted mode operation is used to reduce the power consumption level at mobile stations, it may induce an increase in packet delay levels. In this paper, we thus consider a multiplexing scheme for paging and channel allocation packets under which slots are dynamically allocated for the paging packet transmission. For this dynamic scheme, we develop an analytical method for deriving the delay characteristics exhibited by paging and channel allocation packets, and investigate the effect of network parameters on the delay level by using this method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.78-85
• /
• 2012

Low-Voltage power lines should equip surge protection devices which protect electronic equipments and human lives against lightning and abnormal voltages. Data transmission capacity of the power line is determined by frequency characteristics of the surge protective devices. To analyze the effects of surge protective devices on the data transmission performance, various combinations of installation methods are tested which include ZnO varistor elements that is compatible with class I, class II and class III. The result claims that ZnO varistor for class III is found to be one of the main factors that deteriorates the transmission performance. To overcome this problem a serial connection methed between Gap type SPD and ZnO varistor is proposed. With the proposed scheme, laboratory experimental results show that the data transmission performance can be improved up to 91.9[%] with proper SPD combination.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.1
• /
• pp.19-27
• /
• 1988

In the user-network interface for the parcticing ISDN, an effective phase aligned time compression multiplexing transmission system is designed and analyzed in the 2 wire passive BUS. In TCM, tha average SNR due to crosstalk from adjacent channelis 9.72(dB), and in regarding the phase aligned process, frames are designed to have maximum propagation time of 6(us) so that the connection distance is extended by 0.8(Km). Therefore, the proposed transmission system is suitable for the connection between end-subscriber and network.

• Journal of Biomedical Engineering Research
• /
• v.26 no.5
• /
• pp.301-307
• /
• 2005

We introduce a new multimedia telemedicine system which is called Telemedicine for Real-time Emergency Multi-consultation(TREM), based on multiple connection between medical specialists. Due to the subdivision of medical specialties, the existing one-to-one telemedicine system needs be modified to a simultaneous multi-consulting system. To facilitate the consultation the designed system includes following modules: high-quality video, video conferenceing, bio-signal transmission, and file transmission. In order to enhance the operability of the system in different network environment, we made it possible for the user to choose appropriate data acquisition sources of multimedia data and video resolutions. We have tested this system set up in three different places: emergency room, radiologist's office, and surgeon's office. All three communicating systems were successful in making connections with the multi-consultation center to exchange data simultaneously in real-time.

• International Journal of Computer Science & Network Security
• /
• v.21 no.1
• /
• pp.119-124
• /
• 2021

Elastic Optical Networks (EONs) allow to solve the high demand for bandwidth due to the increase in the number of internet users and the explosion of multicast applications. To support multicast applications, network operator computes a tree-shaped path, which is a set of optical channels. Generally, the demand for bandwidth on an optical channel is enormous so that, if there is a single fiber failure, it could cause a serious interruption in data transmission and a huge loss of data. To avoid serious interruption in data transmission, the tree-shaped path of a multicast connection may be protected. Several works have been proposed methods to do this. But these works may cause the duplication of some resources after recovery due to a link failure. Therefore, this duplication can lead to inefficient use of network resources. Our work consists to propose a method of protection that eliminates the link that causes duplication so that, the final backup path structure after link failure is a tree. Evaluations and analyses have shown that our method uses less backup resources than methods for protection of a multicast connection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2106-2112
• /
• 1998

In this paper, we propose an antenna sharing scheme between 800 MHz AMPS and CDMA systems using CDMA transmission antenna. We restructured the path of signals such that signals from two systems use AMPS amplifier or CDMA amplifier. The performance of proposed scheme is compared with currently operating system's performance in terms of call connection rate, call completion rate and dropped-call rate after implementing proposed method to the AMPS/CDMA basestation. The results show that the voice quality and call connection of the proposed system is comparable to that of the commercial systems. The number of antenna at the base station can be reduced without performance degradation if the proposed transmission antenna sharing scheme and previously reported receiving antenna sharing technique are used together.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.199-201
• /
• 2000

This paper describes the theory and experimental result of scaled model of STATCOM. The STATCOM, a solid-state voltage source inverter coupled with a transformer, is tied to a transmission line. A STATCOM inject an almost sinusoidal current of variables magnitude, at the pont of connection. This injected current is almost in quadrature with the line voltage, thereby emulating an inductive or capacitive reactance at the point of connection with the transmission line.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.2
• /
• pp.28-30
• /
• 1975

In this paper a new network configuration for two-line four-line connection in telephone transmission system is proposed. It is proved that this network configuration is useful not only in an anti-sidatone circuit for telephone substation but also in a repeater station in the telephone system. It can ba realized in an integrated circuit.

• Journal of Computing Science and Engineering
• /
• v.4 no.3
• /
• pp.225-239
• /
• 2010

This paper introduces a new approach to modeling relative distance among nodes under a variety of communication rates, due to node's mobility in Mobile Ad-hoc Networks (MANETs). When mobile nodes move to another location, the relative distance of communicating nodes will directly affect the data rate of transmission. The larger the distance between two communicating nodes is, the lower the rate that they can use for transferring data will be. The connection certainty of a link also changes because a node may move closer to or farther away out of the communication range of other nodes. Therefore, the stability of a route is related to connection entropy. Taking into account these issues, this paper proposes a new routing metric for MANETs. The new metric considers both link weight and route stability based on connection entropy. The problem of determining the best route is subsequently formulated as the minimization of an object function formed as a linear combination of the link weight and the connection uncertainty of that link. The simulation results show that the proposed routing metric improves end-to-end throughput and reduces the percentage of link breakages and route reparations.