• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.644-647
• /
• 2007

In this paper, we present our method of controlling the transmission path of compressor vibration to reduce the vibroacoustic of refrigerator. Firstly, to reduce the vibroacoustic radiated from compressor _ mount system, main transmission path was found experimentally and applied partial contact to transmission path to minimize the transmissibility from compressor operation to base plate. In order to verify our method, we designed changing of the connection part between grommet and base plate. Through experiment with modified connection part, we certificate experimentally the noise reduction of refrigerator. Finally, we apply previous connection part to grommet inner shape to enhance the effect of the system. From experimental results, we make certain the possibility of noise reduction of refrigerator through this approach.

• 한국멀티미디어학회논문지
• /
• 제21권6호
• /
• pp.667-677
• /
• 2018

Since sensor networks consist of sensor nodes with limited energy resources, so efficient energy use of sensor nodes is very important in the design of sensor networks. Sensor nodes consume a lot of energy for data transmission. Clustering technique is used to efficiently use energy in data transmission. Recently, mobile sink techniques have been proposed to reduce the energy load concentrated on the cluster header near a sink node. The CMS(Cluster-based Mobile sink) technique minimizes the generation of control messages by creating a data transmission path while creating clusters, and supports the inter-cluster one-hop transmission. But, there is a case where there is no connectivity between neighbor clusters, it causes a problem of having a long hop data transmission path regardless of local distance. In this paper, we propose a SCBC(Strong connection balancing cluster) to support the path of the minimum number of hops. The proposed scheme minimizes the number of hops in the data transmission path and supports efficient use of energy in the cluster header. This also minimizes a number of hops in data transmission paths even when the sink moves and establishes a new path, and it supports the effect of extending the life cycle of the entire sensor network.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.192-194
• /
• 2001

The Transmission network provides physical transport, network security, and connection services. The five principles of Transmission pricing are economic efficiency, cost recovery, efficient regulation, simplicity and transparency, non-discrimination. The Transmission Charges are made up of transmission connection charge and transmission charge of network. The Transmission Losses will be considered through Marginal Transmission Loss Factors in the market operation. The transmission loss rentals are used for the reduction of the annual revenue requirement of the transmission network for the purpose of derivation of transmission use of network charge.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.129-138
• /
• 2013

Water interruption is often caused by a rupture in the branch-like singular pipeline. This will cause critical complaints from household and may decrease public service quality. As an alternative of singular pipeline, additional parallel pipeline could be installed for sustainable water supply. This system is called double pipeline system and able to be utilized for water transmission line between treatment plant and distribution reservoir. Construction of double pipeline was thought to increase capital cost, which can be an issue to waterworks authorities. Reducing capital cost was possible by means of installing connectors between two parallel pipelines because of reduced diameter of each pipe. To obtain optimal design condition for connectors, it was necessary to compare water pressure according to accident location, to investigate flow according to connection pipe spacing, connection pipe diameter, and aging of pipe. Reliable and economical connection layouts were determined based on these results. The cost estimation for each design condition was carried out. Cost was approximately reduced by 20 ~ 30 % compared to the double pipeline without connections. In addition to this, connection between double pipelines could expect extra benefits for maintenance since the pipe could be repaired and rehabilitated without interruption.

• 한국지반공학회논문집
• /
• 제29권10호
• /
• pp.5-18
• /
• 2013

부등침하는 연약지반에 시공되는 철탑기초에 있어서 주요한 손상을 야기한다. 송전철탑용 연결형 말뚝기초는 연약지반에서의 송전철탑기초의 부등침하를 방지하기 위한 구조물로서, 주기초체와 주기초체 사이에 위치하여 기초를 연결하는 연결보로 구성된다. 본 연구에서는 송전용 철탑기초에 작용하는 연결보의 영향을 조사하기 위하여, 전라북도에 위치한 건설현장에서 24회의 모형재하시험을 수행하였다. 시험에서는 다양한 하중조건과 연결보 조건이 고려되었으며, 시험결과 수평하중에 의한 연결형 말뚝기초의 발생변위가 철탑에 작용하는 수평하중의 각도에 따라 달라지는 것으로 나타났다. 연결형 기초의 침하는 연결보의 강성이 증가할수록 감소하였으며, 수평지지력은 수평하중이 재하되는 철탑의 높이가 낮을수록 증가하였고, 파괴시점에서의 하중의 크기는 대부분의 경우 하중재하방향에 상관없이 유사한 것으로 나타났다.

• 한국통신학회논문지
• /
• 제29권12B호
• /
• pp.1042-1051
• /
• 2004

IEEE1394는 멀티미디어 흠 네트워크 환경에서 사용되는 대표적인 네트워크 프로토콜로서 비동기 전송과 등시성 전송을 통한 멀티미디어 서비스를 제공한다. 하지만 다수의 A/V 디바이스가 IEEE1394 네트워크에 참여하여 멀티미디어 데이터 전송을 하게 되면 등시성 자원의 독점과 등시성 연결의 중복이 발생할 수 있다. 본 논문에서는 IEEE1394-IEC61883 기반의 멀티미디어 홈 네트워크 환경에서 등시성 자원과 등시성 연결의 효율적인 관리를 위한 미들웨어를 제안한다. 본 논문에서 제안된 등시성 연결 관리 미들웨어는 다양한 종류의 등시성 연결을 지원하며 등시성 연결의 안정적인 복원을 보장하며 멀티미디어 데이터의 실시간 송수신을 보장하도록 설계 구현되었다. 제안된 미들웨어에서 등시성 연결 관리를 위한 코바 APl를 제공하였으며 성능 평가 및 검증을 하였다.

• 한국통신학회논문지
• /
• 제32권2B호
• /
• pp.118-123
• /
• 2007

This paper studied the transmission control protocol over IP network to enhance the performance of the GSO satellite communication networks. The focus of this study is how to reduce the long round trip time and the transmission data rates over satellite link in the bidirectional satellite network. To do it, this study applied the caching and spoofing technology. The spoofing technology is used to reduce the required time for the link connection during communication. The caching technology is to improve the transmission bandwidth efficiency in the high transmission data rate link The tests and measurements in this study was performed in the commercial GSO communication satellite network and the terrestrial Internet network. The results of this paper show that the studied protocol in this paper highly enhance the performance of the bidirectional satellite communication network compare to the using TCP/IP satellite network protocol.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.75-78
• /
• 2007

The structural methodology in designing a transmission tower have been performed to assume a simple truss behavior. But there're quite differences between a simple truss behavior and a real one. A suitable explanation for a structural stability can be expressed as a semi-rigid connection instead of the assumed hinged connection. This study proposes an alternative structural analysis modelling strategy for the transmission tower design. Proposed element models are truss element model, beam element model, and combined beam-truss element model. The static finite element analysis shows that there's a moment distribution between a mainpost member and the other bracing member.

• 한국항행학회논문지
• /
• 제16권5호
• /
• pp.781-786
• /
• 2012

본 논문에서는 캐패시터가 주기적으로 병렬 연결된 전송선로를 이용한 높은 분배 비율을 갖는 비대칭 분배기의 설계와 성능을 제안하였다. 높은 분배 비율을 갖는 분배기에서 요구되는 높은 임피던스 값은 마이크로스트립 선로로 구현 가능한 값으로 제한하였고, 낮은 임피던스 값은 캐패시터가 주기적으로 병렬 연결된 전송선로를 이용하여 설계하였다. 이러한 설계 방법은 선로 임피던스 값이 $10{\Omega}$ 이하의 전송선로를 마이크로 스트립으로 구현 가능하게 하였다. 이러한 설계 방법을 증명하기 위해서 중심주파수 1 GHz이고, 분배 비율이 10:1인 비대칭 분배기를 구현하였으며, 그 결과는 시뮬레이션과 1dB 이내에서 일치함을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
• /
• pp.37-40
• /
• 2002

Ground connection began by experimenting lightning with the use of a kite and it means electric appliances, communication equipments, measuring instruments and so on connecting the Earth in order to flow away overcharged electricity. There are two kinds of earth connection: Power Ground and Signal Ground. Power Ground is for preventing an electric shock and in general there's no current in the connector. However in an accident, there's a quick flow of electricity out to the Earth. Signal Ground is not only for the safety of appliances but also for the safety of equipment operation. This paper is about connection for noise and interference reduce in order to prevent wrong operation and distortion of signal in the electrical appliances which can take place in cable TV.