• 한국해양공학회지
• /
• 제37권5호
• /
• pp.215-224
• /
• 2023

While melting glaciers due to global warming have facilitated the development of polar routes, Arctic vessels require reliable anti-icing methods to prevent hull icing. Currently, the existing anti-icing method, i.e., the heating coil method, has disadvantages, such as disconnection and power inefficiency. Therefore, a carbon nanotube-based surface heating element method was developed to address these limitations. In this study, the numerical analysis of the surface heating element method was performed using ANSYS. The numerical analysis included conjugate heat transfer and computational fluid dynamics to consider the conduction solids and the effects of wind speed and temperature in cold environments. The numerical analysis method of the surface heating element method was validated by comparing the experimental results of the heating coil method with the numerical analysis results (under the -30 ℃ conditions). The surface heating element method demonstrated significantly higher efficiency, ranging from 56.65-80.17%, depending on the conditions compared to the heating coil method. Moreover, even under extreme environmental conditions (-45 ℃), the surface heating element method satisfied anti-icing requirements. The surface heating element method is more efficient and economical than the heating coil method. However, proper heat flux calculation for environmental conditions is required to prevent excessive design.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.793-802
• /
• 2024

In the framework of the European project SAMOSAFER, this numerical study focuses on some thermal aspects of the Emergency Draining Tank (EDT) located underneath the core of a Molten Salt Reactor. In case of an emergency, this tank passively receives the liquid fuel salt and is designed to ensure a subcritical state. An important requirement is that the fuel does not overheat to maintain the EDT Hastelloy container integrity. The present EDT is based upon a group of hexagonal cooling assemblies arranged in a hexagonal grid and cooled down thanks to conduction through the inert salt layer up to an air flow in charge of removing the heat. This numerical thermal study relies on a conjugated heat transfer analysis coupling a Finite Element solid thermal code (SYRTHES) and two instances of a Finite Volume CFD codes (Code_Saturne). Calculations on an initial design suggest that a simple center airpipe flow is likely to not sufficiently cool the device. Alternative solutions have been evaluated. Introduction of fins to enhance the heat transfer do not bring a noticeable improvement regarding maximum temperature reached. However, a solution in which the central pipe air flow is replaced by several cooling channels located closer to the fuel is investigated and suggests a better cooling.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.265-274
• /
• 2024

The current research focuses on the development of a numerical approach to forecast strongly subcooled flow boiling of FC-72 as the refrigerant in various vertical minichannel shapes for high-heat-flux cooling applications. The simulations are carried out using the Volume of Fluid method with the Lee phase change model, which revealed some inherent flaws in multiphase flows that are primarily due to an insufficient interpretation of shearlift force on bubbles and conjugate heat transfer against the walls. A user-defined function (UDF) is used to provide specific information about this noticeable effect. The influence of shape and the inlet mass fluxes on the flow patterns, heat transfer, and pressure drop characteristics are discussed. The computational results are validated with experimental measurements, where excellent agreements are found that prove the efficiency of the present numerical model. The findings demonstrate that the heat transfer coefficient decreases as the mass flux increases and that the constriction design improves the thermal performance by 24.68% and 10.45% compared to the straight and expansion shapes, respectively. The periodic constriction sections ensure good mixing between the core and near-wall layers. In addition, a slight pressure drop penalty versus the thermal transfer benefits for the two configurations proposed is reported.

• Earthquakes and Structures
• /
• 제26권3호
• /
• pp.229-237
• /
• 2024

This paper studied the subgrade spring stiffness and its influencing factors in the seismic deformation method of circular tunnel. Numerical calculations are performed for 3 influencing factors: stratum stiffness, tunnel diameter and burial depth. The results show that the stratum stiffness and tunnel diameter have great influence on the subgrade spring stiffness. The subgrade spring stiffness increases linearly with stratum stiffness increasement, and decreases with the tunnel diameter increasement. When the burial depth ratio (burial depth/tunnel diameter) exceeds to 5, the subgrade spring stiffness has little sensitivity to the burial depth. Then, a proposed formula of subgrade spring stiffness for the seismic deformation method of circular tunnel is proposed. Meanwhile, the internal force results of the seismic deformation method are larger than that of the dynamic time history method, but the internal force distributions of the two methods are consistent, that is, the structure exhibits elliptical deformation with the largest internal force at the conjugate 45° position of the circular tunnel. Therefore, the seismic deformation method based on the proposed formula can effectively reflect the deformation and internal force characteristics of the tunnel and has good applicability in engineering practice.

• 자원환경지질
• /
• 제44권5호
• /
• pp.413-431
• /
• 2011

옥천변성대 남서부에 위치하는 전남 해남군 황산면 모이산 지역에는 백악기 말 유천층군 해남층의 황산 화산쇄설 암을 모암으로 하는 천열수 금-은 광화대가 발달한다. 본 연구는 광화대의 형성과 관련된 지질구조를 파악하기 위해 모이산 지역의 층리배열, 습곡, 단층, 단열계, 석영맥의 특성, 단열계의 상대적인 발달순서 등을 조사하였고, 이를 바탕으로 광화작용이 발생할 당시의 지구조환경을 고찰해 보았다. 층리는 동북동 주향 방향이 우세하며 북북서 내지 남남동 방향의 저각 경사를 보이고 분산된 층리 배열은 경사-이동 단층 이외에 (동)북동 방향의 준수평-직립 개방습곡에 의해 규제되어 있다. 단열계는 적어도 6~7회의 변형단계를 걸쳐 형성되었다. D1 단계; 연장성이 우세한 동서 (D1-1)와 남북(D1-2) 방향의 주 단열조 형성기, D2 단계; 북서 방향의 인장단열 형성기, 동서(우수향)와 남북(좌수향) 방향의 공액 전단단열 운동기, D3 단계; 북동 방향의 인장단열 형성기, 동서(좌수향)와 남북(우수향) 방향의 공액 전단단열 재활동기, D4 단계; 연장성이 미약한 남북 방향의 인장단열 형성기, D5 단계; 북서 방향의 인장단열 재형성기. 동서(우수향)와 남북(좌수향)방향의 공액 전단단열 재활동기, D6 단계; 연장성이 미약한 동서 방향의 인장단열 형성기. 변형단계별 단열조의 출현빈도는 D1-1(19.73 %)> D1-2(16.44 %)> D3=D5(14.79 %)> D2(13.70 %)> D4(12.33 %)> D6(8.22 %) 순으로 우세하게 나타나고 평균개수/1 m는 D6(5.00개)> D5 = D4(4.67개)> D2(4.60개)> D3(4.13개)> D1-1(3.33개)> D1-2(2.83개) 순으로 높게 나타난다. 전체 단열조의 평균 조밀도는 420개로서 모이산 지역의 단열조는 평균 23.8 cm 간격 이상으로 발달한다. 석영맥의 방향성별 출현빈도는 동서 방향(52 %)> 북서 방향(28 %)> 남북 방향(12 %)> 북동 방향(8 %) 순으로 우세하게 나타난다. 전체 석영맥의 평균 조밀도는 4.14개로 나타나고 모이산 지역의 석영맥은 평균 24.2 cm 간격 이상으로 발달한다. 석영맥에 대한 미구조 연구결과, 천열수 금-은 광화작용(약 77.9~73.1 Ma)은 지구조적 응력이 아닌 천열수 파괴 단열작용과 직후의 정적인 지구조환경 하에서 기존에 형성된 연장성이 우세한 D1 단계의 동서 방향과 남북 방향의 단열조를 따라 발생한 것으로 보인다. 모이산 지역의 D1 단열작용은 유천층군과 불국사 화성압류의 화성활동과 변형을 초래하는 후기 백악기 이자나기판의 북향-사교 섭입작용과 관련하여 남북 방향의 압축력과 인정력이 교호하는 불안정한 지구조환경 하에서 발생하였던 것으로 고찰된다.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.197-213
• /
• 2001

Conjugate trienoic acids (CTA) occurred in triacylglycerols (TGs) of the seed oils of Trichosanthes kirilowii, Momordica charantia and Aleurites fordii, and they were easily converted to their methyl esters in a mixture of sodium methoxide-methanol without any structural destruction. The main fatty acids in triacylglycerol (TG) fraction of the seed oils of Trichosanthes kirilowii are $C_{18:2{\omega}6}$ (32.2 mol %), $C_{18:3{\;}9c.11t,13c}$ (38.0 mol %) and $C_{18:1{\omega}9}$ (11.8 mol %), followed with $C_{16:0}$ (4.8 mol %) and $C_{18:0}$ (3.1 mol %). The TG fraction was resolved into 20 TG molecular species according to the partition number (PN) by reversed-phase (RP)-HPLC. The main TG species were $DT_{c2}$, $MDT_{c}$ and $D_{2}T_{c}$, of which amounts reached 63 mol % of total TG molecular species. The TG sample was fractionated into 11 fractions according to the number of double bond in the molecule by $Ag^{+}-HPLC$ and the species of $DT_{c2}$, $MDT_{c}$ and $D_{2}T_{c}$ were also eluted as main components. The TG species containing CTA showed unusual behaviours in the order of elution by HPLC ; first, TG moleular species of $DT_{c2}$ (D; dienoic acid, $T_{c}$; punicic acid, $T_{ci}$; ${\alpha}-eleostearic$ acid, M ; monoenoic acid, $S_{t}$; stearic acid) was eluted earlier than $Mt_{c2}$, although they have the same PN number of 40, and, secondly, the species of $DT_{ci2}$ with eight double bonds was eluted earlier than that of $D_2T_{ci}$ with seven double bonds. Intact TG of the seed oils of Momordica charantia contained mainly fatty acids such as $C_{18:3{\omega}9c,11t,13t}$ (57.7 mol %), $C_{18:1{\omega}9}$ (17.4 mol %), $C_{18:0}$ (12.3 mol %) and $C_{18:2{\omega}6}$ (10.6 mol %), and was classified into 13 fractions by RP-HPLC. The main TG species were as follows ; $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3\;9c,11t,13t})_{2}$, 39.1 mol %] and $S_{t}T_{ci2}$ [$(C_{18:0})(C_{18:3\;9c,11t,13t})_2$, 33.9 mol %] comprising about 73 mol % of total TG species, accompanied by $DT_{ci2}$ [$(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})_{2}$, 7.3 mol %], $D_{2}T_{ci}$ [$ (C_{18:2{\omega}6})_{2}(C_{18:3\;9c,11t,13t})$, 3.6 mol %] and $MDT_{ci}$ [$(C_{18:1{\omega}9})(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})$, 3.5 mol %]. Simple TG species of $T_{ci3}$ [$(C_{18:3\;9c,11t,13t})_3]$ was present in a small amount of 1.4 mol %, but other simple TG species were not detected. The TG was also resolved into 11 fractions according to the number of double bond by $Ag^{+}-HPLC$, and the species were mainly occupied by $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3\;9c,11t,13t})_{2}$, 39.4 mol %] and $S_tT-{ci2}$ [$(C_{18:0})(C_{18:3\;9c,11t,13t})_{2}$, 35.4 mol %] $DT_{ci2}$ species with eight double bonds was also developed faster than $D_2T_{ci}$ one with seven double bonds as indicated in the analysis of TG of the seed oils of T. kirilowii, and $MT_{ci2}$ species with cis, trans, trans-configurated double bond was eluted earlier than $MT_{c2}$ species with cis, trans, cis-configurated double bond. The main components of fatty acid in total TG fraction isolated from the seed oils of of Aleurites fordii were in the following order ; $C_{18:3\;9c,11t,13t}$ (81.2 mol %)> $C_{18:2{\omega}6}$ (8.5 mol %)> $C_{18:1{\omega}9}$ (5.4 mol %)$. With resolution of the TG by RP-HPLC, eight fractions such as $T_{ci3}$, $Dt_{ci2}$, $D_{2}T_{ci}$, $MT_{ci2}$, $PT_{ci2}$ (P; palmitic acid), $PMT_{ci}$, $PDT_{ci}$ and $S_{t}T_{ci2}$ ($S_{t}$; stearic acid) were isolated, respectively. TG species of $T_{ci3}$ [$(C_{18:3\;9c,11t,13t})_{3}$, 54.2 mol %], $DT_{ci2}$ [$(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})_{2}$, 15.0 mol %] and $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3 9c,11t,13t})_{2}$, 14.8 mol %] were present as main species.

• 한국응용과학기술학회지
• /
• 제13권1호
• /
• pp.21-29
• /
• 1996

박과식물(科植物) 종실(種實)에는 총지질량(總脂質量)이 $21.9{\sim}50.7%$의 범위(範圍)로 비교적(比較的높았으며, 특(特)히 박, 하늘타리의 경우는 41.9%와 50.7%로 조사(調査)한 시료(試料)중에 제일 높았으며, 또 모든 시료(試料)가 약(約) 98% 이상(以上)의 중성지질(中性脂質)을 함유(含有)하고 있었다. 호박, 수세미오이, 수박, 참외, 오이 및 박종자(種子)의 총지질(總脂質)에는 리놀산(酸)의 함량(含量)이 제일(第一) 많아 $56.8{\sim}84.0%$이였으며, ${\alpha}$-리놀레산(酸)의 함량(含量)은 0.0${\sim}$0.6%로 매우 적었고, 올레산(酸)이 주성분(主成分)인 모노엔산(酸)과 팔미트산(酸)이 대부분(大部分)인 포화지방산(飽和脂肪酸)은 그 함량(含量)이 각각(各各) 5.7${\sim}$22.2%와 9.9${\sim}$20.6%로 시료(試料)에 따라 심한 차이(差異)를 보였다. 하늘타리 종자(種子)의 총지질(總脂質)에는 $C_{18:2{\omega}6}$과 $_{9c.11t.13c-}C_{18:3}$(Punicic acid)이 40.5%와 34.9%로 주요(主要) 성분(成分)이였고, 그 다음으로 $C_{18:1{\omega}9$가 13.8% 함유(含有)되어 있었으며, 그러나 $_{9c/11t.13t-}C_{18:3}$(${\alpha}-eleostearic$ acid)는 2.2%에 지나지 않았다. 한편 여주의 경우(境遇)에는 $_{9c.11t.13c-}C_{18:3}$이 66.9%로 제일(第一) 많았으며, 그 다음으로 $C_{18:1{\omega}9$와 $C_{18:1{\omega}6$이 17.7%, 10.4% 각각(各各) 함유(含有)되어 있었고, 하늘타리에 많이 함유(含有)되어 있는 $_{9c.11t.13c}-C_{18:3}$는 $_{9t.11t.13c-}C_{18:3}$(${\beta}-eleostearic$ acid)와 함께 1.1% 정도(程度)로 소량(少量) 포함(包含)되어 있었다. ${9c.11t.13c-}C_{18:3}$와 $_{9c.11t.13t-}C_{18:3}$와 같은 conugate trienoic acid는 여타시료(餘他試料)에서는 전연 검출(檢出)되지 않았다. 하늘타리와 여주의 종자유(種子油)의 극성지질(極性脂質)에는 이틀의 중성지질(中性脂質)에 다량(多量)으로 존재(存在)하는 conjugate trienoic acid가 극(極)히 소량(少量)밖에 존재(存在)하지 않는 것은 매우 특징적(特徵的)이며, 포화지방산(飽和脂肪酸)이 중성지질(中性脂質)(9.9${\sim}$20.6%)에 비(比)하여 극성지질(極性脂質)(25.0${\sim}$29.4%) 에 보다 많이 함유(含有)되어 있다는 사실(事實)을 나머지 시료(試料)에서 공통적(共通的)으로 찾아볼 수 있었다. 박과식물(科植物) 종자(種子)는 리놀산(酸)을 많이 함유(含有)하고 있는 군(群)과, $_{9c.11t.13c}-C_{18:3}$ 및 $_{9c.11t.13t-}C_{18:3}$와 같은 conjugate trienoic acid를 가진 군(群)으로 대별(大別)할 수 있었다.

• Animal cells and systems
• /
• 제5권1호
• /
• pp.51-57
• /
• 2001

We have previously shown that oocyte maturation is induced by an immobilized progesterone, progesterone-3-carboxymethyloxime - bovine serum albumin conjugate (P-BSA) in Rana dybowskii. In this study, we confirmed the maturation inducing activity of P-BSA on Xenopus oocyte and examined the binding character of the immobilized progesterone on the surface of Xenopus oocytes after removal of the vitelline layer. P-BSA induced maturation of Xenopus oocytes but E-BSA failed to do so as observed in Rana. Binding of the immobilized progesterone, fluorescein isothiocyanate-labeled progesterone-3-0-carboxymethyloxime-BSA (P-BSA-FITC) on the devitellined oocytes surface was examined by fluorescence confocal microscopy. The binding affinity of P-BSA-FITC to the devitellined oocyte was higher than that of estrogen-BSA-FITC (E-BSA-FITC) or testosterone-BSA-FITC (T-BSA-FITC). The binding disappeared in the presence of excess free progesterone but not in the presence of free estrogen. Maximum binding occurred after two-hours of incubation with P-BSA-FITC at pH 7.5. Stronger binding occurred in oocytes at stage Vl than stage IV, and in vitro treatment of hCG enhanced the binding. Taken together, these results suggest that a specific receptor for progesterone exists on the plasma membrane of Xenopus oocytes and that progesterone acts initially on this putative receptors and triggers generation of membrane-mediated second messengers during the early stage of oocyte maturation In amphibians.

• 공업화학
• /
• 제25권5호
• /
• pp.544-547
• /
• 2014

본 연구에서는 효소면역 분석법(enzyme-linked immunosorbent assay)과 면역크로마토그래픽 기법을 결합하여 Legionella pneumophila 검출을 위한 면역스트립을 제작하였다. 면역스트립은 4종의 멤브레인을 이용하여 제작하였다. 니트로셀룰로오스 멤브레인은 포획항체를 고정화하여 신호 발생을 일으키기 위해 사용되었고, 두 종류의 유리섬유 멤브레인은 각각 중합체 패드와 시료주입 패드로 사용되었다. 셀룰로오스 멤브레인은 모세관 현상으로 시료흐름을 유도하는 흡수 패드로 이용하였다. 샌드위치 면역반응과 효소반응에 의해 30 min 이내에 생성된 발색신호는 정성 및 정량 분석이 가능하였다. 분석조건 하에서 육안에 의한 정성 검출뿐 아니라, $1.3{\times}10^3-1.3{\times}10^6CFU/mL$ 범위의 L. pneumophila 농도를 디지털카메라와 자체 제작된 소프트웨어를 이용하여 정량적으로 분석할 수 있었다.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.100-107
• /
• 2007

A internal lobe pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. In particular, the pump is an essential machine element of an automotive engine to feed lubricant oil. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the rotors: usually the outer one is characterized by lobes with circular shape, while the inner rotor profile is determined as conjugate to the other. The topic of this paper is the design of a new rotor, which is based on specific performance as different types depending on the shape of the lobe of the outer rotor. First, the design of internal lobe pumps with circular, elliptical, and their combined lobe profiles is considered. The latter is a new type of lobe profile with special shape whose curvature follows a definite function. Then we introduce the performance indexes used for the comparison. Some of these indexes, such as flow rate and flow rate irregularity, are commonly used for the comparison, while specific slipping is particularly suitable in this case. It is possible to notice that the circular and elliptical type is comparable to the circular one or the elliptical one in terms of flow rate irregularity, but has improved performance in terms of specific slipping. Results obtained from the analysis enable the designer and manufacturer of oil pump to be more efficient in this field.