• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.259-260
• /
• 2023

The rapid urbanization and modernization observed in countries like Myanmar have led to significant concerns regarding traffic congestion, especially in urban areas. This study focuses on the analysis and revitalization of urban transport in selected areas of Myanmar. The core of urban transportation planning lies in travel forecasting, which employs models to predict future traffic patterns and guide decisions related to road capacity, transit services, and land use policies. Travel demand modeling involves a series of mathematical models that simulate traveler behavior and decision-making within a transportation system, including highways, transit options, and policies. The paper offers an overview of the traditional four-step transportation modeling system, utilizing a simplified transport network in the context of Mandalay City, Myanmar.

• Journal of the Korea Society for Simulation
• /
• v.15 no.1
• /
• pp.19-25
• /
• 2006

As metropolitan areas are rapidly growing in both a lot of population and traffic volume, it causes traffic congestion. Generally, High Occupancy Vehicle (HOV) lanes may increase the efficiency of road usage. The main contribution in this paper is to provide the scientific attempt to measure the effectiveness with regard to HOV lanes adaptation using an Integration simulation tool in order to alleviate the traffic congestion in Olympic highway.

• Journal of the Korean housing association
• /
• v.21 no.4
• /
• pp.11-22
• /
• 2010

In the urban area where rapid suburbanization trend continues, the role of mixed use building is controversial. It is argued that the mixed use building is an effective tool to recover residential function of urban core(urban regeneration). It is also argued that the building is a cause of serious urban problems, such as congestion, public service shortages. The fundamental purpose of this study is to examine the role of mixed use building in terms of urban growth management in Seoul. For this purpose, data of mixed use building from 1981 to 2007 are collected and analysed. The results show that most of mixed use buildings are located in either sub-centers or population losing areas, rather than traditional urban core. Therefore, it is hard to accept that the two controversial arguments. The mixed use building noncore areas in most cases. However, it dose help to increase population inflow in non-core areas. it is difficult to accept the public service assertion which states that super-high rise mixed use building causes public service congestion, because the building is built in population losing or demand decreasing area. Based on these findings this study suggests some policy alternatives such as urban service boundary or concurrency program to management urban growth.

• Journal of Korean Society of Transportation
• /
• v.18 no.3
• /
• pp.7-16
• /
• 2000

Traffic congestion has become severe in large metropolitan areas by the travel behavior of employees as the low rate of vehicle occupancy and the high rate of Private auto using. In order to relieve traffic congestion, central and local government plan to implement diverse transportation demand management strategies. The governments want to know what employment types and locations in different metropolitan areas lead to the highest rate of vehicle occupancy and Private auto use. This study suggest that in large metropolitan areas, the employment locations of urban and suburban as well as the employment type of service show low vehicle occupancy. In medium metropolitan sizes. low vehicle occupancies are observed in service employment as well as in the employment locations of CBD. CBD fringe. In small metropolitan areas, a low rate of vehicle occupancy exists in service employment as well as in the employment locations of urban and suburban areas. A high rate of auto use shows not only in basic employment but also in the employment locations of CBD and CBD fringe.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.52-57
• /
• 2003

This study suggests several ways to improve the railroad facilities in the urban areas so as to maintain the urban railroad facilities and minimize their adverse impact on the roads around the facilities. Environmental problems such as noise and vibration can be minimized by constructing soundproofing walls and improving railway and train systems. To reduce the traffic congestion at the railroad crossings, current at-grade crossings should be changed to separated crossings. Moreover, the criteria by where railroad crossings are located should be revised. In the long term, the land use development for the railroad station and the surrounding areas needs to be changed. Several case studies of Japan's and France's major cities show the potential of successfully integrating the development of railroad facilities and their surrounding areas. In addition, there is a need to .consider institutional aspects, to improve the railroad facilities in the urban areas and to allow the integrated development of the railroad facilities and the surrounding areas.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.333-350
• /
• 1999

Today freeway is thought to be a very important transportation facility carrying tremendous traffic flow as the main corridor within the area of between the areas. However freeway is experiencing severe congestion and accidents by increased entrance ramp flow especially at peak time period. Ramp meters on the freeway entrance ramps that supply traffic to the freeway in a measured or appropriately regulated amount are needed for alleviating freeway congestion. Because ramp meters can be operated to discharge traffic at a measured or regulated rate thus maintaining more uniform speed on the mainline section maximizing the throughput to the freeway within the capacity of a downstream bottleneck and reducing the congestion related accidents. Thus the objectives in this study were to analyze the traffic characteristics on the freeway I-94 with ramp metering system before/after ITS technology in Detroit (Michigan) area compare shifts of the traffic characteristics on the freeway I-94 before/after ITS technology and finally suggest a better ramp metering strategy for the freeway system The following results were obtained: i)Flow occupancies and speeds on the mainline merge section of freeway were shown to be a big difference depending on the peak periods areas and directions based on the distribution of traffic flow characteristics on the freeway. ii)Reduced speed was shown to be more than 5 mph and ramp flow was also shown to be more than 240 vph at peak periods if there was the ramp metering system constructed on the freeway. iii)Ramp metering system was shown to be optimally operated on the freeway if ramp flow could be maximized within the range of over 900 vph and reduced occupancy could be also maximized by no more than 2 percent at peak periods. iv)The average flows on the freeway after the ITS technology were shown to be a decrease of over 20% depending on the peak periods areas and directions when compared with those flow on the freeway before the ITS technology. over 20% depending on the peak periods areas and directions when compared with those speeds on the freeway before the ITS technology. vi)The average metering rates on the freeway after the ITS technology were shown to be an increase of over 10% depending on the peak periods areas and directions when compared with those metering rates on the freeway before the ITS technology.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.57-58
• /
• 2018

As interest in the Internet of Things increases, technologies are being studied to handle information exchanged between things using the Internet of Things. Specially, as container terminals are automated, the use of the Internet of Things in the terminals increases and varies. However, the use of the Internet of Things to enhance the efficiency of the container terminal operation is insufficient. Currently, the container terminal shows that the arrival pattern of the external truck is concentrated at a particular time. This resuls in gate congestion and affects the waiting times of the truck. The damage is caused by environmental pollution problems and social problems in neighboring port areas. Therefore, in this thesis, we will analyze the causes of the external truck's waiting time problems affecting the gate congestion at container terminals and study methods to mitigate congestion under Internet of Things environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.215-222
• /
• 2010

Average speed denotes a travel speed based on the average travel time of vehicles to traverse a segment of roadway, and average travel speed is used as a measure of effectiveness (MOE) suggested in the highway capacity manual (HCM) for evaluating the level of service (LOS) of roadway. Most of the urban freeways in our country are having congestion problem regardless of the rush hours as a high-speed highway with a speed limit of 80km/h or less. Especially traffic congestion within the ramp junction areas is becoming worse by the increased traffic and lack of links with the arterials around the urban freeway. So, the purpose in this study is to identify the traffic characteristics within the ramp junction areas of urban freeway, predict the average speed within the ramp junction areas based on the traffic characteristics identified, and finally prove the validity of the average speed predicted.

• Journal of information and communication convergence engineering
• /
• v.11 no.1
• /
• pp.30-44
• /
• 2013

Traffic congestion has become a serious problem with the recent exponential increase in the number of vehicles. In urban areas, almost all traffic congestion occurs at intersections. One of the ways to solve this problem is road expansion, but it is difficult to realize in urban areas because of the high cost and long construction period. In such cases, traffic signal control is a reasonable method for reducing traffic jams. In an actual situation, the traffic flow changes randomly and its randomness makes the control of traffic signals difficult. A prediction of traffic jams is, therefore, necessary and effective for reducing traffic jams. In addition, an autonomous distributed (stand-alone) point control of each traffic light individually is better than the wide and/or line control of traffic lights from the perspective of real-time control. This paper describes a stochastic optimum control of crossroads and multi-way traffic signals. First, a stochastic model of traffic flows and traffic jams is constructed by using a Bayesian network. Secondly, the probabilistic distributions of the traffic flows are estimated by using a cellular automaton, and then the probabilistic distributions of traffic jams are predicted. Thirdly, optimum traffic signals of crossroads and multi-way intersection are searched by using a modified particle swarm optimization algorithm to realize real-time traffic control. Finally, simulations are carried out to confirm the effectiveness of the real-time stochastic optimum control of traffic signals.

• Journal of Industrial Technology
• /
• v.39 no.1
• /
• pp.27-31
• /
• 2019

Semiconductor logistics systems are facing difficulties in increasing production as production processes become more complicated due to the upgrading of fine processes. Therefore, the purpose of the research is to design predictive models that can predict traffic during the pre-planning stage, identify the risk zones that occur during the production process, and prevent them in advance. As a solution, we build FABs using automode simulation to collect data. Then, the traffic prediction model of the areas of interest is constructed using deep learning techniques (keras - multistory conceptron structure). The design of the predictive model gave an estimate of the traffic in the area of interest with an accuracy of about 87%. The expected effect can be used as an indicator for making decisions by proactively identifying congestion risk areas during the Fab Design or Factory Expansion Planning stage, as the maximum traffic per section is predicted.