• Industrial Engineering and Management Systems
• /
• v.14 no.4
• /
• pp.413-419
• /
• 2015

This study solved the problem of unstable production chains by considering allocation rate conformance. We proposed two phased algorithm suitable for solving production planning that considers allocation rate conformance; the first phase was heuristic initial solution generation, and the second phase was tabu-search based solution improvement. By using three data sets which have different sizes of data and three different criteria, the results of proposed algorithm were compared with MIP results. The proposed algorithm showed the best production plan in terms of allocation rate conformance, and it was appropriate for other criteria; it solved the problem of unstable production chains by solving concentrated and unfair allocation.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.750-757
• /
• 1999

The protocol conformance testing is to check whether an implementation of a protocol conforms to its specification. And it is important to improve the interoperability of protocol and the efficiency of cost. In general, protocol is composed of the control flow representing observable behaviors and the data flow representing internally used variables. Until now, research for generation of test suite has been realized only consideration the control flow of protocol or separation control flow from data flow. Case of considering control flow, contents of test was simple and definite. Length of test was short. But it was of little application, and it didn't manage each kind errors in data flow. Therefore, we must generate test case that can manage control and data flow. So, anomaly of variable must be removed for efficient conformance testing. Therefore in this dissertation, we proposed algorithm which can remove anomaly of variable for efficient conformance testing. And it showed that anomaly of variable was got rid of applying this algorithm to real protocol.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.112-115
• /
• 2010

차량전장용 소프트웨어에 대한 합리적인 설계 및 테스트가 중요해졌다. 차량전장용 소프트웨어의 신뢰성을 검증하기 위해 AUTOSAR Conformance Test 표준이 마련되었는데, AUTOSAR Conformance Test 표준에는 테스트 대상, 테스트 커버리지, 테스트 요구조건 & 케이스 정의 및 테스트 아키텍처 환경에 대한 정의방법을 기술하고 있다. 본 논문에서는 차량전장용 소프트웨어의 안정성을 테스트하기 위해 소프트웨어가 저장되는 EEPROM 메모리에 대한 시뮬레이션 테스트를 수행하였으며, AUTOSAR 표준에 맞게 제작된 EEPROM Abstraction 시뮬레이션 모듈을 이용하였다. 또한 EEPROM Abstraction 시뮬레이션 모듈 위에서 AUTOSAR Conformance Test 표준에 정의된 적합성 테스트를 수행하기 위한 테스트 어댑터와 타겟 어댑터의 기능을 기술하고, EEPROM Abstraction 시뮬레이션 모듈에서 리얼타임 요소를 만족하기 위해 필요한 개선 사항을 제안하고자 한다.

• ETRI Journal
• /
• v.8 no.3
• /
• pp.44-50
• /
• 1986

본고는 현재 수행중에 있는 ISDN 프로토콜 연구 과제에 속하는 프로토콜 검증장치구현과 관련하여 X. 25 Product의 level 2에 대해 conformance test를 실시하는데 사용된 테스트 방법, 테스트 시스팀 구성, 테스트 시나리오 등의 테스트 환경과 실제 테스트를 실시한 결과 등을 중심으로 기술하였다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.217-224
• /
• 2010

Nowadays, people perform their tasks anywhere anytime using their mobile devices. For this reason, data synchronization (DS) between mobile devices and a central server has become one of the most essential technologies in mobile environments. Currently, several mobile DS protocols are proposed and used. However, the existing DS protocols cannot guarantee interoperability between them. To solve the problem, an embedded DS gateway has been developed in our previous study. The gateway runs on a Windows Mobile-based emulator. It converts data on a mobile device into common data specified by OMA DS standard protocol and vice versa. The embedded gateway has been built to support the OMA DS standard protocol. In order to verify that the embedded gateway conforms to the OMA DS standard protocol, two kinds of OMA conformance tests have to be conducted - interoperability test with an OMA DS-based server and conformance test with SCTS (SyncML Conformance Test Suit). In this paper, some parts of the gateway previously built are modified and the modified gateway is installed on a Windows Mobile-based smart phone. And the interoperability test and the conformance test with the SCTS are conducted. The results of the tests show that the embedded DS gateway operates properly on the Windows Mobile-based smart phone and that the gateway passes the tests, verifying its conformity to the OMA DS standard protocol. In addition, DS performance tests show that DS delay times between a real smart phone and a DS server increase gently as the number of DS data increases. In other words, the embedded DS gateway built in this paper can be used for a real smart phone at a reasonable performance cost.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.653-656
• /
• 2007

A concern about the ebXML concentrated, the necessity for Validation request among the ebXML sollutions has become both at home and abroad. There aren't any test implement for Validation of BPSS. The ebXML BPSS system establishment related to ebMS Standard Conformance and Interoperability is required. In this paper, We'll suggest system model to estimate Conformance of document in accordance with case items to frame the ebXML BPSS Validation items.

• ETRI Journal
• /
• v.31 no.4
• /
• pp.376-386
• /
• 2009

An active radio frequency identification (RFID) system has the advantages of a long identification distance and a good identification rate, overcoming passive RFID drawbacks. Therefore, interest in the development of active RFID systems has been gradually increasing in areas of harbor logistics and national defense. However, some identification failures between active RFID systems developed under the same standards have been reported, presumably due to a lack of development of accurate evaluation methods and test equipment. We present a realization of the hardware and software of an emulator to evaluate the standard conformance of an active RFID system in a fully anechoic chamber. The performance levels of the designed emulator are analyzed using Matlab/Simulink simulations, and the applicability of the emulator is verified by evaluating the standard conformance of a real active RFID tag. Finally, we propose a new evaluation method by incorporating a self-running test mode environment into the RFID tags to reduce testing time and increase testing accuracy. The application of the suggested method to actual tags improves measurement uncertainty by 0.56 dB over that obtained using existing methods.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.75-77
• /
• 2006

In this paper, the technology of the conformance test for Broadcast Web Site Service (BWS) which is one of the data services of the T-DMB (Terrestrial Digital Multimedia Broadcasting) is proposed. First, the standard of the BWS Service is introduced and then the method of the conformance test of BWS bitstream and BWS receiver module is provided. A BWS bitstream analyzer is implemented for use in verifying the transmitted BWS bitstreams. To provide a means for the receiver manufactures to verify their own BWS receiver modules, a receiver test suite is developed including BWS test bitstreams and a BWS reference receiver module. The BWS bitstream analyzer includes the analysis function for the conformance test of MOT protocol, HTML, PNG, MNG, JPEG, and Ecma Script. Also, it was actually used for verifying the BWS test bitstreams. In the course of developing a HWS receiver module, 4he BWS receiver module under test can be verified by comparing the results of the BWS reference receiver module with those of the receiver module under test. when the same BWS test bitstreams are fed into the two receiver modules.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.45-53
• /
• 2022

The avionics industry has recently adopted an open architecture to increase software portability and reduce the development schedule and cost associated with changing hardware equipment. This paper presents a data modeling method compliant with FACE, a widely used open avionics architecture. A FACE data model is designed and implemented to output data from VOR/ILS avionics equipment. A FACE Conformance Test Suite (CTS) program is utilised to verify that the data model meets FACE standards. The proposed data modeling method is expected to improve the development schedule and cost associated with modifying communication methods and ICDs (Interface Control Documents).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.169-176
• /
• 2010

Substation Automation System is basically operating throughout communicative services among IEC 61850 based devices. So, minimum requirement in order to install the system in the substation is to verify server and client conformance of IEDs and HMIs according to the IEC 61850 standard. Even though UCA IUG issued IEC 61850 conformance test procedures for both the server and the client, Much of the test is limited to IEDs as server and there is no client-only testing tool except KEMA server test tool sets. this study aims to develop IEC 61850 client testing system for verifying the full communication conformance of the substation automation system and this paper describes the design and implementation of the testing system.