• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1264-1264
• /
• 2001

The affect of surface temperatures of fruits on spectrum which measures actual sugar contents was observed. PLSR was applied to develop the sugar content evaluation system that was not affected by temperature. The reflected spectrum was used at the wavelengths of 654 and 1052nm with the separation distance of 2.5nm. To increase the conformance of a model using unknown samples, let the minimum value of PRESS be an optimum factor. 71 Shingo pears stored in a refrigerator were left in a room temperature for a while and these temperatures and reflected spectrums were measured. Reflected spectrums were measured at the wavelengths of 654 and 1052nm, 3 samples in one second. To measure these at different temperatures, the experiment was repeated hourly and four times. Starting temperatures of 2-3 were increased up to 17. The total number of measured spectrum was 284. To develop a sugar content evaluation system model using measured reflected spectrum, three groups of samples were considered. First group had 51 samples at 14 and second group had 141 samples with lower or higher temperatures than 14. Third group had 155 samples with well distributed temperatures. Other samples were used as validations to ensure the conformance. Measuring the sugar contents of samples with surface temperatures other than 14 were difficult with PLS model I, developed by using a sample temperature of 14. If the sugar contents were compensated using samples' temperatures, results of prediction would be close to the expected results and it would be one of the most important factors to develop this system. PLS models I and II could compensate the temperature but the precision would not come up to the standard. High precision was expected by using samples with wide ranges of temperatures and sugar contents. Both models showed the possibility of an improvement of a sugar content evaluation system disregarding the temperature. For practical use of a system, selecting samples should be done carefully to reduce the effect of the temperature.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.35-51
• /
• 2012

Cloud computing is internet-based computing where computing resources are offered over the Internet as scalable and on-demand services. In particular, in case a number of various cloud services emerge in accordance with development of internet and mobile technology, to select and provide services with which service users satisfy is one of the important issues. Most of previous works show the limitation in the degree of user satisfaction because they are based on so called concept similarity in relation to user requirements or are lack of versatility of user preferences. This paper presents cloud service selection reasoning which can be applied to the general cloud service environments including a variety of computing resource services, not limited to web services. In relation to the service environments, there are two kinds of services: atomic service and composite service. An atomic service consists of service attributes which represent the characteristics of service such as functionality, performance, or specification. A composite service can be created by composition of atomic services and other composite services. Therefore, a composite service inherits attributes of component services. On the other hand, the main participants in providing with cloud services are service users, service suppliers, and service operators. Service suppliers can register services autonomously or in accordance with the strategic collaboration with service operators. Service users submit request queries including service name and requirements to the service management system. The service management system consists of a query processor for processing user queries, a registration manager for service registration, and a selection engine for service selection reasoning. In order to enhance the degree of user satisfaction, our reasoning stands on basis of the degree of conformance to user requirements of service attributes in terms of functionality, performance, and specification of service attributes, instead of concept similarity as in ontology-based reasoning. For this we introduce so called a service attribute graph (SAG) which is generated by considering the inclusion relationship among instances of a service attribute from several perspectives like functionality, performance, and specification. Hence, SAG is a directed graph which shows the inclusion relationships among attribute instances. Since the degree of conformance is very close to the inclusion relationship, we can say the acceptability of services depends on the closeness of inclusion relationship among corresponding attribute instances. That is, the high closeness implies the high acceptability because the degree of closeness reflects the degree of conformance among attributes instances. The degree of closeness is proportional to the path length between two vertex in SAG. The shorter path length means more close inclusion relationship than longer path length, which implies the higher degree of conformance. In addition to acceptability, in this paper, other user preferences such as priority for attributes and mandatary options are reflected for the variety of user requirements. Furthermore, to consider various types of attribute like character, number, and boolean also helps to support the variety of user requirements. Finally, according to service value to price cloud services are rated and recommended to users. One of the significances of this paper is the first try to present a graph-based selection reasoning unlike other works, while considering various user preferences in relation with service attributes.

• Korean Business Review
• /
• v.20 no.2
• /
• pp.135-145
• /
• 2007

We defined quality management practice factor and workforce management factor and confirm their conformance, and examine the former affect positively on production performance. Moreover, we examine whether workforce factor have an moderate effect on 'quality management practice facor - performance' relationship, using moderate regression. As the result of empirical study on nationwide manufacturing companies, workforce management factor have an moderate effect on the relationship which means need for investment on two factors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2255-2263
• /
• 1994

Protocol conformance testing consists of procedures to observe an output and to check a transition state of the Implementation Under Test considered as a black box by applying an input. There are several methods to check the transition state such as Unique Input/Output(UIO) sequence. Distinguishing Sequence(DS) and Characterization Set(CS). Particularly, as a test method for a state having no UIO sequence, Partial UIO sequence method can be considered. In this paper, three properties which can be found among Partial UIO sequence and a modified algorithm using these properties are suggested.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2002.11a
• /
• pp.621-624
• /
• 2002

최근 급속도로 발전하고 있는 생체인식 분야는 상업적인 활성화와 이에 따른 사용자의 신뢰성 확보를 위해 서로 다른 생체인식 제품들의 상호호환성과 상호연동성을 고려한 표준화된 생체인식 데이터 및 API에 대한 기술 개발을 하고 있으며, 이러한 생체 인식 기술의 표준화는 제품들의 호환성 측면에서 매우 중요하므로 생체 정보를 이용하는 모든 제품에 대하여 시스템과 소프트웨어에 대한 표준적합성 시험이 요구될 것이다. 이에 따라 본 연구에서는 생체인식시스템 응용 인터페이스 표준 규격인 BioAPI에 대하여 표준 적합성 시험도구를 개발하기 위하여 우선적으로 BioAPI 표준규격에서 명시하는 필수함수에 대한 표준적합성시험을 수행하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3070-3076
• /
• 1999

Petri net is one of the effective modeling techniques which analyzes and designs concurrent and asynchronous systems. CPN is an extended Petri net which has color tokens. In this paper, we propose a new test case generation method using CPN. It transforms Estelle Specification into CPN, which is applicable to Design/CPN. It also generates UIO and subtour from OG and descriptor, which are resulted from Design/CPN. Using the proposed method, we can get more improved test coverage than existing methods. Therefore, more effective protocol conformance testing could be conducted. The test case generating method will be the basis of the automatic testing environmented.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.41-42
• /
• 2008

무선방식으로 원격에서의 인식으로 정보교환을 가능하게 하는 RFID(Radio Frequency IDentification) 시스템은 태그 내의 배터리 유무에 따라 수동형과 능동형으로 구분된다. 수동형 태그는 판독기로부터 받은 RF 신호를 에너지로 이용하기 때문에 인식거리가 짧으며, 가격이 싸고 반영구적으로 사용할 수 있는 장점이 있다. 반면에, 능동형 태그는 금속재질에 취약한 수동형의 단점을 극복하는 동시에 인식거리가 길고, 인식률이 좋은 장점이 있다. 따라서 항만물류나 국방 분야에서 능동형 RFID 시스템에 대한 개발이 점차 확대되고 있다. 하지만 동일한 표준으로 개발된 제품의 서로 간에 인식이 불가능한 사례가 보고되고 있으며, 국제적으로 정확한 평가방법 및 장치가 정립되지 않아 개발된 제품들 간의 상호 운용성 및 표준 적합성 평가에 대한 어려움이 존재한다. 본 논문에서는 능동형 RFID 시스템의 적합성 평가를 위한 에뮬레이터의 하드웨어 및 소프트웨어를 설계하고 제작하였다. 설계된 장치는 Matlab의 Simulink를 통한 시뮬레이션으로 성능을 분석하였고, 실제 능동형 RFID 태그의 표준적합성 평가를 통해 에뮬레이터의 적용 가능성을 검증하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.65-71
• /
• 2016

Bluetooth technology(BT) is a standard for short distance wireless communication and widely used to connect and control various electronic and telecommunication devices without wires, where CSR8670 chip is generally adopted. These BT devices are required to comply with BT specification and the equipments for conformance test are also important. However, the existing BT testing methods have inconvenience in that they are mostly time-consuming procedure due to not only repetitive execution for each evaluation element but also error-prone nature of manual experiments. This paper proposes an automated BT communication test method using CSR8670 chip, which solves the problems related to manual testing methods. The proposed method can reduce the development period of BT products and guarantee the quality improvement owing to the exact system error detection capability.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.960-964
• /
• 2004

During system resource improvement process that based on Object-Oriented technology could be affect to the continuous system performance if lack appropriate management and control objects mechanism. This paper proposes a methodology to support continuous system performance and its stability. The adoption is based on Java Container Framework and Collections Framework for object collection. Also includes Software Engineering, Object Migration and Multiple Class Loaders mechanism accommodate to construct Continuous Migration Container (CMC). CMC is a runtime environment provides interfaces for management and control to support upgrading object process. Upgrade object methodology of CMC can be divided into two phase are object equivalence checking and object migration process. Object equivalence checking include object behavior verification and functional conformance verification before object migration process. In addition, CMC use Multiple Class Loaders mechanism to support reload effected classes instead of state transfer in migration process while upgrading object. These operations are crucial for system stability and enhancement efficiency.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.481-484
• /
• 2001

본 논문에서는 MPEG-2 AAC 디코더의 DSP구현에 관한 연구결과로서 IS0/1EC 13818-7 표준에 의거 구현된 MPEC-2 AAC 디코더의 각 세부 기능블럭들의 구성 및 동작원리에 대하여 요약 기술하고. DSP연산에 최적화된 연산구조의 연구를 바탕으로 16bit 고정소수점 연산구조를 가지는 DSP상에서 구현된 MPEG-2 AAC 디로더의 시스템의 하드웨어 및 소프트웨어 구성에 관하여 간략한 기술하였다. 구성된 디코더의 성능평가를 통하여 MPEC-2 AAC 비트스트림을 디코딩하기 위하여 필요로 하는 연산량 및 소요 메모리의 양을 측정하고, 디코더 성능의 중요 척도인 음질평가를 수행하였다. 수행방법으로서 conformance test에 의거하여 PSNR을 측정함으로써 객관적인 성능 지표의 제시와 함께, 주관적인 음질 평가도 병행하여 수행하였다.