• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.180-180
• /
• 2012

A microplasma system source based on microwave parallel stripline resonator (MPSR) was developed for the generation of microplasmas in a wide range of pressure from some torr to 760 torr. This source was operated at its resonance frequency that much depends upon not only its discharge gap size but also operated pressure. This paper applied a simple circuit model to analyze the effects of discharge gap size and pressure to resonance frequency and impedance of MPSR in the cases with and without plasma exist inside the discharge gap. In the process of calculating, the conformal mapping method was used to estimate the capacitance of the MPSR. The calculating results by using circuit model agree well with the simulation results that using commercial CST microwave studio software.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.337-343
• /
• 1998

In Korea, map coordinates has been confused in use since the map projection system has been complicated by using two different methods i.e., Gauss conformal double projection and Gauss-Kruger projection which are com-plicated in using through history. So, we have to understand the two projections' characteristics and differences. In this study, we would find out a fact that the maximum difference occurred in longitude and latitude is about 15cm at the Korean peninsular. This shift is accepted as proper in GIS and cartographic application but should be considered carefully in converting of the geodetic control point coordinates.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.13-16
• /
• 2004

In this paper, FDTD analysis of the bow-tie antenna is investigated by incorporating static field solution that is suitable to the bow-tie antenna without increasing computational time. Transforming static feld solution to the rotated grid system, we can obtain the transformed static field solution which is able to represent field behavior near the oblique edge line of the bow-tie antenna. The result shows a good agreement with a MoM analysis and is compared conformal modeling technique and regular FDTD method.

• Smart Structures and Systems
• /
• v.16 no.3
• /
• pp.435-457
• /
• 2015

The most widely known form of multifunctional aircraft structure is smart structures for structural health monitoring (SHM). The aim is to provide automated systems whose purposes are to identify and to characterize possible damage within structures by using a network of actuators and sensors. Unfortunately, environmental and operational variability render many of the proposed damage detection methods difficult to successfully be applied. In this paper, an original robust damage detection approach using output-only vibration data is proposed. It is based on independent component analysis and matrix perturbation analysis, where an analytical threshold is proposed to get rid of statistical assumptions usually performed in damage detection approach. The effectiveness of the proposed SHM method is demonstrated numerically using finite element simulations and experimentally through a conformal load-bearing antenna structure and composite plates instrumented with piezoelectric ceramic materials.

• Kyungpook Mathematical Journal
• /
• v.56 no.3
• /
• pp.979-991
• /
• 2016

The object of the present paper is to study N(k)-quasi-Einstein manifolds. We study an N(k)-quasi-Einstein manifold satisfying the curvature conditions $R({\xi},X){\cdot}Z=0$, $Z(X,{\xi}){\cdot}R=0$, and $P({\xi},X){\cdot}Z=0$, where R, P and Z denote the Riemannian curvature tensor, the projective curvature tensor and Z tensor respectively. Next we prove that the curvature condition $C{\cdot}Z=0$ holds in an N(k)-quasi-Einstein manifold, where C is the conformal curvature tensor. We also study Z-recurrent N(k)-quasi-Einstein manifolds. Finally, we construct an example of an N(k)-quasi-Einstein manifold and mention some physical examples.

• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.192-200
• /
• 2011

This paper proposes a new modeling method for estimating the impedance of an on-chip power/ground meshed plane. Frequency dependent R, L, and C parameters are extracted based on the proposed method so that the model can be applied from DC to high frequencies. The meshed plane model is composed of two parts: coplanar multi strip (CMS) and conductor-backed CMS. The conformal mapping technique and the scaled conductivity concept are used for accurate modeling of the CMS. The developed microstrip approach is applied to model the conductor-backed CMS. The proposed modeling method has been successfully verified by comparing the impedance of RLC circuit based on extracted parameters and the simulated impedance using a 3D-field solver.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1272-1273
• /
• 2009

We demonstrate conformal phosphor coating and patterning methods on light emitting diodes (LEDs) using image processing based optofluidic maskless lithography (IP-OFML) system in microfluidic channels. IP-OFML allows a real-time detection and dynamic mask generation for packaging of randomly dispersed microchips. Our system detects each chip by considering rotation of the chip through image processing regardless of their arrangement error. Therefore, it precisely packages the chip making conformal polymer layer.

• Honam Mathematical Journal
• /
• v.40 no.2
• /
• pp.325-346
• /
• 2018

The object of the present paper is to study some types of Ricci pseudosymmetric $(LCS)_n$-manifolds whose metric is Ricci soliton. We found the conditions when Ricci soliton on concircular Ricci pseudosymmetric, projective Ricci pseudosymmetric, $W_3$-Ricci pseudosymmetric, conharmonic Ricci pseudosymmetric, conformal Ricci pseudosymmetric $(LCS)_n$-manifolds to be shrinking, steady and expanding. We also construct an example of concircular Ricci pseudosymmetric $(LCS)_3$-manifold whose metric is Ricci soliton.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.10
• /
• pp.2716-2721
• /
• 1999

The problem of determining the conformal maps from the unit disk onto a jordan region has been completed by solving the theodorsen equation that is nonlinear. For the hubners method, which has been well known for the efficient method among the many suggestions for the Theodorsen equation, it has been reproved in our early study that the convergence rate could be remarkably improved by exploring and applying a low-frequency pass filter[1]. However, in the Hubner's method with the low-frequency filter, the discrete numbers and parameters of the low-frequency filter were able to be acquired only by experience. In this paper we show algorithms that determine the discrete numbers and parameters of the low-frequency filter automatically in accordance with the given region. This results from analyzing the function, which decides the shape of the given domain under the assumption that the degree of the problem depends of the transformation of a given domain, as seen in the Fourier Transform.

• Kyungpook Mathematical Journal
• /
• v.58 no.4
• /
• pp.761-779
• /
• 2018

The object of the present paper is to study weakly Z symmetric spacetimes $(WZS)_4$. At first we prove that a weakly Z symmetric spacetime is a quasi-Einstein spacetime and hence a perfect fluid spacetime. Next, we consider conformally flat $(WZS)_4$ spacetimes and prove that such a spacetime is infinitesimally spatially isotropic relative to the unit timelike vector field ${\rho}$. We also study $(WZS)_4$ spacetimes with divergence free conformal curvature tensor. Moreover, we characterize dust fluid and viscous fluid $(WZS)_4$ spacetimes. Finally, we construct an example of a $(WZS)_4$ spacetime.