• 대한소아치과학회지
• /
• 제45권2호
• /
• pp.137-143
• /
• 2018

본 실험의 목적은 초기 우식 부위에 레진 침투법과 불소 적용 후 탈회 저항성을 비교하기 위함이다. 인공 우식을 유발한 시편을 대조군, 1.23% 산성불화인산염(Acidulated phosphate fluoride(APF))군, 레진 침투군으로 분류하고 각 재료를 적용 후 재탈회시켰다. 이후 공초점 레이저 현미경(Confocal Laser Scanning Microscope(CLSM))을 이용하여 탈회 깊이를 측정하였고 주사전자현미경(SEM)을 이용하여 법랑질 표면 거칠기를 관찰하였다. CLSM을 이용하여 탈회 깊이를 측정하였을 때 대조군, 1.23% 산성불화인산염군, $Icon^{(R)}$ caries infiltrant군 순으로 감소하였다. 탈회 깊이는 1.23% 산성불화인산염군, $Icon^{(R)}$ caries infiltrant군이 대조군에 비해서는 유의성 있는 차이를 보이지만 두 군 간의 차이가 없었다(p < 0.05). 표면거칠기는 대조군에서 매우 거칠고 표면이 불규칙한 양상을 보였고 1.23% 산성불화인산염군, $Icon^{(R)}$ caries infiltrant 군으로 갈수록 표면 거칠기와 불규칙성은 감소하였다.

• Restorative Dentistry and Endodontics
• /
• 제25권4호
• /
• pp.575-586
• /
• 2000

In this study, adaptation of compomer to saliva contaminated dentin was evaluated with scanning electron microscope(SEM) and confocal laser scanning microscope(CLSM). For the SEM study, the occulusal surfaces of thirty two molar teeth were grounded to exposure dentin surfaces. The specimen were randomly assigned to control and three experimental groups with four samples in each group. In control group, Dyract and F-2000 compomer were bonded on the specimens according to the manufactures direction. Experimental groups were subdivided into three groups. They were contaminated with saliva on dentin surfaces ; Experimental group 1 : Saliva was dried with compressed air. Experimental group 2 : Saliva was rinsed with air-water spray and dried. Experimental group 3 : After polymerization of an adhesive, they were contaminated with saliva, and then saliva was rinsed with air-water spray and dried. Dyract and F-2000 compomer were bonded on saliva-treated dentin surfaces. The interfaces between dentin and compomer were observed with SEM. For the CLSM study, Class V cavities were prepared in buccal and ligual surfacess of thirty two molars. The specimens were divided into control and experimental groups. Class V cavities in experimental group were contaminated with saliva and those surfaces in each experimental groups received the same treatments as for the SEM study. Cavities were applied Prime & Bond 2.1 and F-2000 compomer primer/adhesive that were mixed with fluorescein, and then were filled with Dyract and F-2000 compomer. Specimens were embedded in transparent acrylic resin and sectioned buccolingual1y with diamond wheel saw, and then mounted on cover slide for CLSM study. The interface between cavity and compomer was observed by fluoresence imaging with a CLSM. The results were as follows : 1. In SEM exammination of Dyract group, control group, experimental group 2, 3 showed close adaptation to dentin and hybrid layer of $3{\sim}4{\mu}m$ diameter. Interfacial gap between compomer and dentin in experimental group 1 was wider than in control group. 2. In SEM examination of F-2000 group, adaptation to dentin of control group was closer than Dytact control group, but hybrid-like layer was not observed. Interfacial gap between compomer and dentin in experimental group 1 was wider than in Dyract experimental group 1. 3. In dissolution specimens of Dyract and F-2000 group, resin tags penetrated through dentinal tubules in control group and experimental group 1 and 3, but the penetration of resin tag was irregular and partial in experimental group 1. 4. In CLSM exammination of Dyract and F-2000 group, adhesive patterns of control and experimental groups showed same as in SEM. This result suggests the treatment methods, rinsing & drying, repeating all adhesive procedures, will produce good effect on adaptation of compomer to dentin if the dentin surface or polymerized adhesive is contaminated by saliva.

• 대한화장품학회지
• /
• 제40권3호
• /
• pp.247-257
• /
• 2014

새로운 베지클인 glyceryl citrate/ lactate/ linoleate/ oleate를 이용한 수중유형 형태의 아스타잔틴 나노에멀젼에 대해 항산화 효과, 세포 생존력, 단백질과 관련한 효소의 영향, 피부 침투도 그리고 피부에 대한 보습 및 탄력 등의 약용화장품적인 측면에서의 전반적 연구를 실시하였다. 항산화력 및 세포 생존력에 대해선 각각 DPPH법과 MMT assay를 이용하여 측정하였다. 아스타잔틴 나노에멀젼에 대한 또 다른 성질은 2D-Page를 이용한 단백질 분석 및 컨포칼, in-vivo 테스트를 통해 측정하였다. 본 연구를 통해, 아스타잔틴을 포함하는 나노에멀젼은 MMP발현에 관련한 단백질 억제 및 세포외 기질의 분해를 막고 라디칼의 소거에 매우 우수한 결과를 보였다. 종전의 레시친을 이용한 나노에멀젼 보다는 새로운 베지클을 이용한 아스타잔틴 나노에멀젼의 피부 침투가 매우 효과적임을 CLSM을 통해 측정하였다. 또한 28일 동안의 한국 성인 여성 11명을 통한 보습 및 탄력 인비보 테스트에서 우수한 효과를 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.303-309
• /
• 2007

Statement of problem. The effect of gold electroforming on gold alloy was not studied. Purpose. This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. Material and methods. Three pieces of gold strips had undergone the electroforming procedures on one side and then half of the side again electroformed. The set mode for this study was program 1 ($200{\mu}m$). And the processing time was 15min (1/20 time to form $200{\mu}m$ coping). The confocal laser scanning microscope (PASCAL 5, Carl Zeiss, Bernried, Germany) was used to measure the thickness of the pure gold layer electroformed on the gold strips. Half of the gold strip was coated two times with electroformed gold, and the other half one time. The data from the cone focal laser system was processed to get the vertical profile of the strips and the difference of the vertical height between the double coated and single coated layer was regarded as the thickness of the gold coating. The layer thickness value to built 3D image of the cone-focal laser was set $0.5{\mu}m$. Next to the measurement of the thickness of the coating, the Vicker's hardness test was done. It was performed on the double coated surface, single coated surface and non-coated surface (back side) three times each. Results. The mean thickness value gained from gold electroforming technique was measured to be $22{\mu}m$ for sample 1, $23{\mu}m$ for sample 2, $21{\mu}m$ for sample 3. In the same condition of time, power and the amount of electrolyte, the data showed no difference between samples. According to the results of variance analysis, the differences among the variations in number of coating were statistically insignificant (p>0.05), meaning that the two times of gold electroforming coating did not change the hardness of gold-silver-palladium alloy. Conclusion. The test of thickness of gold coating proved the coherency of the gold electroforming procedure, in other words, when the power, the exposed surface area, processing time and the amount of electrolytes were set same, the same thickness of gold would be coated on. The hardness test showed that the electroformed gold coating did not change the hardness of the gold-silver-palladium alloy when it is coated not more than $45{\mu}m$.

• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.100-115
• /
• 1999

The purpose of this study was to investigate the distribution of calcitonin gene-related peptide containing nerve fibers in rat pulp after dentinl injury by means of immunohistochemistry and confocal laser scanning microscope. The Spague-Dawley rats weighing about 250-300gm were used. The animals were devided into normal control and experimental groups. Experimental animals were sacrified 1, 2, 4, 7, 10, 21days after dentinal injury (dentin cutting, and then acid etching with 35% phosphoric acid) on the maxillary molar teeth. The maxillary teeth and alveolar bone were removed and immersed in the 4% paraformaldehyde in 0.1M phosphate buffer (pH 7.4), then were decalcified with 15% formic acid for 10 days. Serial frozen $50{\mu}m$ thick sections were cut on a cryostat. The rabbit CGRP antibody was used as a primary antibody with a dilution of 1:2000 in 0.01M PB. The sections were incubated for 48 hours at $4^{\circ}C$, and placed into biotinylated antirabbit Ig G as a secondary anti body with dilution of 1:200 in 0.01M PB and incubated in ABC(avidin-biotin complex). The peroxidase reaction was visualized by incubating the sections in 0.05% 3,3 diaminobenzidine tetrahydrochloride containing 0.02% $H_2O_2$. For the confocal laser scanning microscopic examination, Primary antibody reaction was same as immunoperoxidase stainning, but fluorescein isothiocyanate(FITC)-conjugate antirabbit IgG as a secondary antibody was used. The confocal laser scanning microscope was used for the examination. A series of images of optical sections was collected with a 20x objective at $3{\mu}m$ intervals throughout the depth of specimen. FITC fluerescence was registrated through a 488nm and 568nm excitation filter, and images were saved on optical disk. The stereoscopic images and three dimentionnal images were reconstructed by computer software, and then were analyzed. The results were as follows : 1. In normal control group, CGRP containing nerve fibers were coursed through the root with very little branching, and then formed a dense network of terminals in coronal pulp. 2. A slight increase in CGRP containing nerve fibers at 1 and 2day postinjury was noted subjacent to the injury site. In the 4day group, there were an extensive increase in the number of reactive fibers, followed by a partial return toward normal levels at 7~10 day postinjury, and return by 21days. 3. The sprouting of the CGRP containing nerve fibers was evident within 2day after dentinal injury, and by 4days there was a maximal increased, but was decreased at 7days and returned to normal 10~21 day postinjury. 4. In confocal laser scanning microscopic exammination, the distinct distribution pattern and sprouting reaction of CGRP containing nerve fibers were observed in stereoscopic images and three dimentional images. These results suggest that CGRP containing nerve fiber can be important role in the response to dental injury and pain regulation.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.359-364
• /
• 2006

Di-block copolymers composed of two biocompatible polymers, poly(ethylene glycol) and poly(D,L-lactide), were synthesized by ring-opening polymerization for preparing polymer vesicles (polymersomes). Emulsion solvent evaporation method was used to fabricate the polymersomes. Scanning electron microscope (SEM) images confirmed that polymersomes have a hollow structure inside. Confocal laser microscope and optical microscope were also used to verify the hollow structure of polymersomes. Polymersomes having various sizes from several hundred nanometers to a few micrometers were fabricated. The size of the polymersomes could be readily controlled by altering the relative hydrodynamic volume fraction ratio between hydrophilic and hydrophobic blocks in the copolymer structure, and by varying the fabrication methods. They showed greatly enhanced stability with increased molecular weight of PEG. They maintained their physical and chemical structural integrities after repeated cycles of centrifugation/re-dispersion, and even after treatment with surfactants.

• Biomolecules & Therapeutics
• /
• 제26권2호
• /
• pp.182-190
• /
• 2018

The objective of this work is to evaluate the effect of polyamidoamine (PAMAM) dendrimers on electroosmotic flow (EOF) through skin. The effect of size and concentration of dendrimer was studied, using generation 1, 4 and 7 dendrimer (G1, G4 and G7, respectively). As a marker molecule for the direction and magnitude of EOF, a neutral molecule, acetoaminophen (AAP) was used. The visualization of dendrimer permeation into the current conducting pore (CCP) of skin was made using G4-fluorescein isothiocyanate (FITC) conjugate and confocal microscopy. Without dendrimer, anodal flux of AAP was much higher than cathodal or passive flux. When G1 dendrimer was added, anodal flux decreased, presumably due to the decrease in EOF by the association of G1 dendrimer with net negative charge in CCP. As the generation increased, larger decrease in anodal flux was observed, and the direction of EOF was reversed. Small amount of methanol used for the preparation of dendrimer solution also contributed to the decrease in anodal flux of AAP. Cross-sectional view perpendicular to the skin surface by confocal laser scanning microscope (CLSM) study showed that G4 dendrimer-FITC conjugate (G4-FITC) can penetrate into the viable epidermis and dermis under anodal current. The permeation route seemed to be localized on hair follicle region. These results suggest that PAMAM dendrimers can permeate into CCP and change the magnitude and direction of EOF. Overall, we obtained a better understanding on the mechanistic insights into the electroosmosis phenomena and its role on flux during iontophoresis.

• 대한한의학회지
• /
• 제27권3호
• /
• pp.107-131
• /
• 2006

Background and Aims: Dansamtongmek-tang (DSTMT) and Dansamsengmek-san (DSSMS) have been used for many years as therapeutic agents for the acute stage of cerebrovascular disease, hypertension and hyperlipidemia in Oriental medicine, but the effects of DSTMT and DSSMS on hyperlipidemia and safety for cell damage are not yet well-known. This study was done to investigate the effects of DSTMT and DSSMS on hyperlipidemia. Methods: In vivo test: after administering DSTMT and DSSMS to SHR and ICR occurred hyperlipidemia for 3 weeks, we analyzed body weight, cholesterol levels. TG, HDL-chol, LDL-chol, LDH in plasma, brain, liver and kidney tissue, and DNA by RT-PCR. In vitro test: after administering DSTMT and DSSMS to human hepatocellular carcinoma in hypoxia, we observed cell cohesion by light microscope, analyzed the inflow of Ca2+ by confocal laser scanning microscope and DNA by RT-PCR. Results: DSTMT significantly decreased the levels of triglyceride and increased the levels of HDL-cholesterol in SHR, and significantly decreased the levels of LDL-cholesterol and body weight and increased the levels of HDL-cholesterol in ICR. DSSMS significantly decreased body weight, total cholesterol levels, LDL-cholesterol, LDH and cardiac risk factor (CRE) in SHR and significantly decreased the levels of total cholesterol, triglyceride, LDL-cholesterol, LDH and CRF in ICR. DSTMT had an effect on protecting cells from damage by inhibiting production of p53 mRNA, and in DSSMS, by inhibiting production of p53 mRNA and p21 mRNA after hypoxia. DSTMT effectively blocked off Ca2+ at low density, but DSSMS effectively blocked off Ca2+ at high density. Both DSTMT and DSSMS had an effect on inhibiting lipid metabolism by blocking off production of apo B mRNA. Conclusions: These results suggest that DSTMT and DSSMS might be usefully applied for treatment of hyperlipidemia and suppression of brain damage.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.8-15
• /
• 1999

The effects of Condebelt press drying on the densification of recycled sheets made from KOCC , AOCC UKP and BKP were examined using CLSM (Confocal Laser Scanning Microscope) and thermal image analysis techniques. It was shown that significant improvement in sheet density, compression strength, tensile strength, surface smoothness was obtained by Condebelt drying. Densification effect by press drying was most prominent for recycled KOCC sheets. And this beneficial effect of Condebelt drying of increasing sheet density and strength was shown to provide opportunities of reducing the utilization ratio of AOCC for cost saving.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.40-40
• /
• 2010

CdSe nanocrystals (NCs) have been decorated on singlewalled carbon nanotubes (SWCNTs) by combining a method of chemically modified substrate along with gate-bias control. CdSe/ZnS core/shell quantum dots were negatively charged by adding mercaptoacetic acid (MAA). The silicon oxide substrate was decorated by octadecyltrichlorosilane (OTS) and converted to hydrophobic surface. The negatively charged CdSe NCs were adsorbed on the SWCNT surface by applying the negative gate bias. The selective adsorption of CdSe quantum dots on SWCNTs was confirmed by confocal laser scanning microscope. The measured photocurrent clearly demonstrates that CdSe NCs decorated SWCNT can be used for photodetector and solar cell that are operable over a wide range of wavelengths.