• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.

• Journal of Microbiology and Biotechnology
• /
• 제11권3호
• /
• pp.458-462
• /
• 2001

The localization of paclitaxel was investigated in suspension culture cells of Taxus chinensis. Over 93% of the cell-associated paclitaxel were detected throughout the entire culture period. Intracellular localization of paclitaxel over the culture time was analyzed further by cell fractionation for days 21 and 42. Paclitaxel contents in intracellular organelles were decreased at day 42, while the content in the cell wall fraction was increased at day 42 compared to the value for day 21. The localization of paclitaxel in the cell wall was confirmed by using the immunocytochemical method with the aid of a confocal laser scanning microscope.

• 한국생활과학회지
• /
• 제21권3호
• /
• pp.539-550
• /
• 2012

In-depth knowledge of fabric microstructure is essential for understanding clothing comfort since it plays a significant role in heat and mass transfer between the human body and clothing. In this study, a novel method was employed for investigating 3D surfaces and solid construction characteristics of specific fabrics by using a reverse engineering technique. The surface construction data were obtained by a confocal laser scanning microscope and then manipulated by a 3D analysis program. Triangle mesh was used for connecting each 3D point, with clouds and fabric surface characteristics created by rendering techniques. For generating a 3D solid model, determinants of radius of curvature was used. According to the proposed method, actual surface expression of the real fabric was achieved successfully. The results from this methodology can be applied to the detailed analysis of clothing comfort that is highly influenced by the microstructure of the fabric.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.577-580
• /
• 2005

Surface quality of a micro-processed sample with laser has been investigated by using of scanning confocal microscope(SCM) and atomic force microscope(AFM). Samples are bump electrodes and ITO glass of LCD module used in a mobile phone and a wafer surface scribed by UV laser. A image of $140\times120{\mu}m^2$ is obtained within 1 second by SCM because scan speed of a x-axis and y-axis are 1kHz and 1Hz, respectively. AFM is able to measure correctly hight and width of ITO and scribing depth and width of a wafer with a resolution less than 300 . However, the scan speed is slow and it is difficult to distinguish a surface composed of different nm kinds of materials. Results show that SCM is preferable to obtain a image of a sample composed of different kinds of material than AFM because the intensity of a reflected light from surface is different from each material.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.52-59
• /
• 2006

Surface qualities of a micro-processed sample with a pulse laser have been investigated by making use of scanning confocal microscope(SCM) and atomic force microscope(AFM). Samples are bump electrodes and ITO glass of LCD module used in a mobile phone and a wafer surface scribed by UV laser. A image of $140{\times}120{\mu}m^2$ is obtained within 1 second by SCM because scan speed of a x-axis and y-axis are 1kHz and 1Hz, respectively. AFM is able to correctly measure the hight and width of ITO, and scribing depth and width of a wafer with a resolution less than 300nm. However, the scan speed is slow and it is difficult to distinguish a surface composed of different kinds of materials. Results show that SCM is preferable to obtain a image of a sample composed of different kinds of material than AFM because the intensity of a reflected light from the surface is different for each material.

• 한국가축번식학회지
• /
• 제20권3호
• /
• pp.343-351
• /
• 1996

본 연구의 목적은 돼지난자의 체외성숙, 수정 및 단위발생시 일어나는 표층과립의 분포를 살펴보고, 그것들의 역할을 규명해 보고자 실시하였다. 난자의 표층과립은 형광염색을 실시한 후 laser scanning confocal microscope를 이용하여 관찰하거나 transmission electron microscope를 사용하여 관찰하였다. Germinal vesicle 단계의 돼지난자에서는 표층과립은 난자피질에 비교적 두꺼운 형태로 발견되었는데, germinal vesicle breakdown이 일어난 직후 피질 부근으로 표층과립의 움직임이 관찰되었다. Microfilaments의 중합화를 방해하는 cytochalasin B를 처리하였을 때 표층과립의 움직임은 관찰되지 않았다. 무 처리군의 수정 및 단위발생을 유도한 난자에서는 표층과립 내용물들이 위란강내에 균질하게 관찰되었으나, cytochalasin B를 처리한 난자에서는 비정상적인 cortical granule의 움직임을 관장하고 이러한 움직임이 수정시 다정자 침입을 막고 표층과립 반응에 영향을 미치는 것으로 사료된다.

• 열처리공학회지
• /
• 제24권5호
• /
• pp.262-270
• /
• 2011

Carbide precipitation and dissolution behavior at various temperatures during heat treatment has been studied in STD11 cold working die steel through confocal scanning laser microscopy; dilatometry; and X-ray diffraction analysis. The equilibrium phase diagram and phase fractions with temperature were calculated using a FactSage program. Confocal laser microscopic observation revealed that ${\alpha}$ to ${\gamma}$ transformation temperature is near $800^{\circ}C$; M7C3 carbides melt at $1245^{\circ}C$; and the melting temperature of STD11 is near $1370^{\circ}C$. XRD results indicated that the M23C6 carbides dissolve in the matrix if austenitized at over $1030^{\circ}C$; while the M7C3 carbides remain up to $1200^{\circ}C$ although their amount decreases. The calculated equilibrium phase diagram showed good agreement with experimental results on carbide dissolution and phase transformation temperatures.

• 한국정보기술학회 영문논문지
• /
• 제9권1호
• /
• pp.89-102
• /
• 2019

Collagen can be used in building artificial skin replacements for treatment of burns and towards the reconstruction of bone as well as researching cell behavior and cellular interaction. The strength of collagen in connective tissue rests on the characteristics of collagen fibers. 3D confocal imaging of collagen fibers enables the characterization of their spatial distribution as related to their function. However, the image stacks acquired with confocal laser-scanning microscope does not clearly show the collagen architecture in 3D. Therefore, we developed a new method to reconstruct, visualize and characterize collagen fibers from fluorescence confocal images. First, we exploit the tensor voting framework to extract sparse reliable information about collagen structure in a 3D image and therefore denoise and filter the acquired image stack. We then propose to segment the collagen fibers by defining an energy term based on the Hessian matrix. This energy term is minimized by a min cut-max flow algorithm that allows adaptive regularization. We demonstrate the efficacy of our methods by visualizing reconstructed collagen from specific 3D image stack.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권4호
• /
• pp.1-11
• /
• 2003

압축력의 변화에 따른 균열 간극변화 양상을 측정하고 간극변화와 수리전도도와의 관계를 파악하기 위해 이 연구에서는 다섯 단계의 수직 일축압축력을 균열면에 연속적으로 가하면서 고해상도의 공초점 레이저 스캔 현미경 (confocal laser scanning microscope; CLSM)을 이용하여 간극의 크기를 측정하고 디지털 이미지를 획득하였다. 기존의 연구들과는 달리 이 연구의 측정방법은 압력변화에 대한 동일시료 간극의 반응을 연속적으로 파악할 수 있는 점이 특징이다. 측정결과는 간극크기가 일정하지 않은 불평탄한 균열형태를 매우 잘 나타내었다. 균열 조도(roughness)로 인해 압력에 따른 간극 변화량은 일정하지 않고 부분마다 다름을 보였다. 각 압력단계에서 간극변화에 따른 투수성 변화양상을 파악하고자 실내투수시험을 병행하여 실시한 결과, 각 압력단계에서의 투수성 변화도 일정한 감소율을 나타내지 않고 간극 변화율이 크더라도 투수율은 오히려 작은 경우도 관찰되었다. 현미경을 통해 측정한 물리적 간극과 실제 유체유동 경로가 되는 수리간극의 크기 차이를 파악하기 위해 계산을 한 결과, 미미한 갈이지만 물리적 간극보다 작은 크기의 수리간극이 구해졌다. 또한, 실내투수시험 결과를 이용하여 구한 투수계수는 삼승법칙을 따르지 않는 것으로 드러났으며, 이러한 사실들은 균열 양쪽이 서로 평행하지 않고 불평탄한 양상을 가짐을 의미하는 것으로서, 현미경을 통해 직접 관찰한 간극양상과 잘 일치하는 것이다.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.320-325
• /
• 2008

The recent industrial application requires technical methods to get the cutting fluid droplet surfaces in particular from the viewpoint of topography and micro texture. To characterize the surface topography of droplet, the combination of the confocal laser scanning microscope (CLSM) and wavelet filtering is well suited for obtaining the droplet geometry encountered in tribological research. This technique indicates a better agreement in obtaining an appropriate droplet surface obtained by the CLSM over a detail range of surface accuracy (resolution: $2{\mu}m$). And the results allow an excellent accuracy in a measurement of a droplet surface. The combination of extended focal depth measurement configured and multi-scale wavelet filtering has proven that it can construct a droplet surface in a successive and accurate way. A multi-scale approach of wavelet filtering was developed based on the decomposition and reconstruction of droplet surface by 2D wavelet transform using db9 (a mother wavelet of daubechies). Also this technique can be extended to characterize the quantification of droplet properties and other field in a wide range of scales. Finally this method is verified to be a better droplet surface modeling in a micro scale arising in a mist machining.