• 제목/요약/키워드: Confocal laser microscope

검색결과 193건 처리시간 0.039초

4분할 photodiode를 이용한 scanning confocal microscope (Scanning confocal microscope using a quad-detector)

  • 유석진;김수철;이진서;권남익
    • 한국광학회지
    • /
    • 제8권2호
    • /
    • pp.165-168
    • /
    • 1997
  • 780 nm의 반도체 레이저, compact disk의 광 pick-up용 actuator, 그리고 4분할 photodiode를 이용하여 scanning confocal microscope를 구성하여 시료면의 높이와 재질의 차이를 측정하였다. 4분할 photodiode에 검출되는 오차 신호를 이용하여 렌즈가 장착되어 있는 actuator를 움직이면서 시료면에 레이저 광속의 초점이 항상 위치하도록 하였으며, 이 때 actuator에 흐르고 있는 전류를 시료면의 높이로 나타내어 3차원 영상으로 표현하였다. 또한 재질의 차이는 4분할 photodiode에 검출되는 합산 신호를 이용하여 컬러 프린터에 나타나는 3차원 영상의 색을 다르게 나타내었다. 전체적인 크기도 30 mm * 20 mm * 20 mm 로서 작고 간단하며 scan 영역은 최대 1.6 mm * 1.6 mm이다. 반사광의 세기를 이용한 scanning confocal microscope의 영상과 4분할 photodiode에 검출되는 오차 신호를 적분하는 방식을 이용한 scanning confocal microscope의 영상을 구하여 그 차이를 비교하였다.

  • PDF

공초점 원리를 이용한 표면 현상 측정 (Surface measurement using Confocal principle)

  • 송대호;유원제;강영준;김경석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 추계학술대회 논문집
    • /
    • pp.51-54
    • /
    • 2000
  • The traditional surface measuring method using confocal principle requires much time to measure an object surface since it is a scanning tool. In this paper, the upgraded confocal microscope is introduced. It is also a scanning tool but it requires 2D-scanning while the traditional one requires 3D-scanning. It means the time for measuring is considerably reduced. In addition, the measuring system is configured to increase the efficiency of beam. He-Ne laser whose frequency is 632.8nm is used for the laser source. An example of measuring result through the upgraded confocal microscope is showed.

  • PDF

암반 불연속면의 거칠기 특성 - 조.중.세립질 화강암을 중심으로 - (Characterization of Fracture Roughness in Coarse.medium.fine Grained Granite)

  • 김종태;정교철;김만일;송재용;박창근
    • 지질공학
    • /
    • 제14권2호
    • /
    • pp.147-168
    • /
    • 2004
  • 이 연구는 지하수유동에 영향을 주는 조ㆍ중ㆍ세립질 화강암 불연속면 거칠기의 특성을 비교한 것이다. 공초점 레이저 현미경으로 관찰된 거칠기 데이터는 스펙트럼 분석과 고속푸리에 변환에 의해 해석되었다. 또한 노이지가 제거된 거칠기 데이터에 대하여 거칠기 특성을 정량화하기 위하여 프랙탈 해석에 적용해 보았다. 이를 위해 조ㆍ중ㆍ세립질 화강암 코어를 대상으로 브라질리안 시험으로 인공 단열을 발생시켰다. 측정은 전체 12개의 공시체에서 36개의 조사선에서 실시되었다. 공초점 레이저 현미경을 사용하여 연속적인 거칠기를 이산 데이터로 표현할 수 있으며, 이렇게 하여 얻어진 이산데이터를 바탕으로 고속 푸리에 변환을 실시한 결과 제2 고조파 성분이 가장 큰 값을 보이고 있다. 또한 스펙트럼 에너지 분포는 조립질 공시체에서 0.9853, 중립질 공시체에서 1.0792, 세립질 공시체에서 0.6794의 평균값을 보이고 있으며, 이는 프랙탈 해석에서와 마찬가지로 거칠기가 클수록 저주파수 영역대에서 고조파의 에너지 분포가 높게 나타남을 알 수 있다.

A New Method for Measuring Refractive Index with a Laser Frequency-shifted Feedback Confocal Microscope

  • Zhou, Borui;Wang, Zihan;Shen, Xueju
    • Current Optics and Photonics
    • /
    • 제4권1호
    • /
    • pp.44-49
    • /
    • 2020
  • In this paper, a new method is presented to measure the refractive index of single plain glass or multilayered materials, based on a laser frequency-shifted confocal feedback microscope. Combining the laser frequency-shifted feedback technique and the confocal effect, the method can attain high axial-positioning accuracy, stability and sensitivity. Measurements of different samples are given, including N-BK7 glass, Silica plain glass, and a microfluidic chip with four layers. The results for N-BK7 glass and Silica plain glass show that the measurement uncertainty in the refractive index is better than 0.001. Meanwhile, the feasibility of this method for multilayered materials is tested. Compared to conventional methods, this system is more compact and has less difficulty in sample processing, and thus is promising for applications in the area of refractive-index measurement.

레버 증폭 구조의 플렉서를 이용한 공초점 현미경의 개발 (The Development of Confocal Microscopy Using the Amplified Double-compound Flexure Guide)

  • 이상원;김위한;정영대;박민규;김지현;이상인;이호
    • 한국광학회지
    • /
    • 제22권1호
    • /
    • pp.46-52
    • /
    • 2011
  • 본 연구에서는 레버 증폭 구조를 이용한 플렉서 기반의 나노 스테이지를 설계, 제작하였다. 제작된 나노 스테이지를 샘플 스테이지로 채용한 공초점현미경을 개발하였다. 2차원 이미징의 구현을 위해서, 기존의 공초점현미경은 레이저를 이미징 평면상에 스캐닝하는 방식으로 구현된다. 본 연구에서는 백 나노미터의 구동정밀도를 가지는 나노 스테이지 위에 놓인 샘플을 2차원으로 스캐닝하면서 2차원 이미지를 구현할 수 있는 공초점현미경을 개발하였다. 플렉서 기반의 나노 스테이지는 이중 판스프링, 변위증폭 레버, PZT 엑추에이터 그리고 변위 센서로 구성 되어 있다. 스테이지의 구동 성능 해석을 위해 상용 유한요소 해석 프로그램을 이용하였다. 현미경에 사용되는 광원은 적색광 레이저이며, 레이저는 여러 광학요소를 거쳐 샘플스테이지의 샘플에 입사되고, 반사된 빛은 광센서인 PMT(Photo Multiplying Tube)로 계측되게 된다. 계측된 빛의 크기를 이용하여서 2차원 이미징을 구현하였다. 개발된 공초점 현미경으로 생쥐 귀의 피부조직을 관찰하여 현미경의 이미징 성능을 검증하였다. 설계된 샘플 스테이지는 기존의 공초점 현미경의 기계적인 Beam 스캐너를 대신함으로써 현미경의 광경로 및 전체시스템을 간소화 하였다.

Confocal Scanning Laser Microscope (CSLM)을 이용한 신규 미백 효과 측정 연구 (New Measurement of Whitening Effects by Using Confocal Scanning Laser Microscope (CSLM))

  • 김명기;조석철;남개원
    • 대한화장품학회지
    • /
    • 제41권3호
    • /
    • pp.279-285
    • /
    • 2015
  • 여성의 얼굴에 과색소침착이 발생하는 것은 불안감, 특히 미적인 요소에 있어서 많은 고민을 유발한다. 피부의 흑화는 자외선(UV)에 대하여 이를 방어하기 위한 기작으로 멜라닌의 양과 밀접한 관계가 있다. 이러한 피부의 구성성분을 관찰하기 위해, confocal scanning laser microscope (CSLM)은 피부에 직접 현미경 검사를 실시하여 어떠한 조직의 변화 없이 피부를 실시간으로 관찰할 수 있는 비침습적 이미지 장치이다. 본 연구에서는 자외선 조사를 통해 유도된 하박 내측 피부의 과색소침착을 유도하여, 다른 피부색을 평가하는 측정기기와 상관성을 분석하여, CSLM을 이용한 새로운 미백 평가방법을 제시하였다. CSLM을 활용한 미백 효능 평가법은 소비자가 보다 이해하기 쉽도록 미백 제품을 평가하는데 유용할 것으로 생각된다.

공초점 레이저 주사 현미경을 이용한 단섬유 복합재료 사출 성형물 내의 섬유 배열 측정 및 수치모사 (Fiber Orientation in Injection-Molded Short Fiber Composites with a Confocal Laser Scanning Microscope and Numerical Simulation)

  • Lee, Kwang-Seok;Le, Seok-Won;Youn, Jae-Ryoun
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2001년도 춘계학술발표대회 논문집
    • /
    • pp.201-204
    • /
    • 2001
  • A Confocal Laser Scanning Microscope (CLSM) is applied to determine three-dimensional fiber orientation states in injection-molded short fiber composites. Since the CLSM optically sections the composites, more than two planes either on or below the surface of composites can be obtained. Therefore, three dimensional fiber orientation states are determined without destruction. To predict the orientation states, velocity and temperature fields are calculated by using a hybrid FEM/FDM method. The change of orientation state during packing stage is also considered by employing a compressible Hele-Shaw model. The predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from other effects, which are not considered in the numerical analysis.

  • PDF