• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.1-6
• /
• 2002

Engine lubrication system is generally affected by vehicle driving conditions, which are composed of acceleration, braking deceleration and accelerating during cornering. The major reason is due to the oil pan system in which oil is directly influenced by inertia farce caused by vehicle driving conditions. Therefore, to confirm safety of engine lubrication system inertia farce effects are also considered in the developing state. For the purpose, we have carried the engine tilting tests using ourselves made test rig. Verifying the test results we also measured the inertia effects on the engine lubrication system using the circular tuning and slalom test with vehicle. Through the comparison study between two kinds of results we obtained that the engine tilting test rig was very useful to confirm the safety evaluation of engine lubrication system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.346-361
• /
• 2006

We establish two models -'intermediate' role model and 'infra-structural' role model - to confirm what role the concepts of 'long-term orientation' and 'asset specificity' execute in the context of supply chain management practices affect on SCM performances. We confirm the model's statistical significance with empirical investigation about 167 manufacturing companies in all over the country. As a result, we find that real data fits to 'infra-structural' role model with added paths of concepts and variables rather to 'intermediate' role model. We prove these results with empirical method of confirmatory factor analysis and structural equation model with AMOS program.

• Journal of Distribution Research
• /
• v.1 no.2
• /
• pp.29-52
• /
• 1996

The objective of this study is to test Parasurman, Zeithaml & Berry(1985)'s service quality gap analysis model, and to confirm reliability and to confirm reliability and validity of the model. The reliability of the model is adopted, but the validity must be retested in the further study. In the results of the gap analysis model, the correlation between consumer expectations and management perceptions of consumer expectations(gap1) was not accepted. The correlation between management perceptions of consumer expectations and service quality specifications(gap2), the correlation between service quality specifications and the service actually delivered(gap3), and the correlation between services delivered and services promised to consumers(gap4) were accepted. To improve domestic telecommunication service quality, practical guides such as standardization of job roles, cooperation among customer-contact persons, communication between managers and employees, evaluation programs for employee's improvement of service quality, appropriate supports for customer-contact persons were suggested. For generalizing the gap model, additional studies under the different contexts and industries will be needed.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.1-5
• /
• 2015

Recently, data throughput of smart electric devices increases dramatically. There is a great interest in a new technology which exceeds the limit of electrical transmission method. Optical PCB can supplement the weakness of electrical signal processing, the research for optical PCB is very active. In this paper, we propose the thermal imprint lithography process to fabrication optical layer of optical PCB and experiment to optimize the process conditions. We confirm process time, pressure, process temperature, demolding temperature and fabricate optical interconnection structure which has $45^{\circ}$ tilted mirror surface for confirm the interconnection efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.175-178
• /
• 2000

An aerostatic stage has frictionless behavior, so it has a advantage of investigation into positioning characteristics. A one-dimensional aemstatic ceramic stage with ballscrew driven and laser scale feedback system is manufactured. aiming at investigating positioning characteristic of aerostatic stage, especially position error and repeatability, we analyze positioning behavior with other factors such as angular error, temperature. Experimemal results show that the aerostatic stage has a l0nm micro step response. Comparing experimental results and calculated abbe's error, we confirm that mean of position error is owing to angular error. And, also we confirm the temperature is dominant factor of repeatability in ten nm order.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.151-156
• /
• 2010

In this paper, several computer simulations are investigated to confirm the DVB-H system performance and to find proper single frequency network cell coverage. From the result, we confirm that 2K mode transmission is more robust to Doppler frequency than 8K mode. The result of this paper can be partially applied to the design the single frequency network.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.169-179
• /
• 2017

The purpose of this research is to identify the overall operation status of the marine program, which operates in the Department attempted, in various qualities and operational programs consisting of lecturers derives the problem, and to the policy proposal accordingly. In order to complete the purpose, to analyzed based on the status of marine programs of the Marine Training Center Chungcheong Cluster of three Education Offices from 2014 until the first half of 2016. In addition to direct visit the scene to confirm the status of the data collected through field surveys and interviews were officials confirm the validity of the data, and also to obtain additional study. In conclusion, First, Establish measures for the reduction of blind spots urgent law. Second, Appliances installed for program development and Instructors training.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.623-627
• /
• 1996

Combined SP/VLF surveys were carried out at tide embankment, Changgi-ri, Anmyeon-up, Chungcheongnamdo in order to confirm the seawater seepage zone of the embankment using the 128 Channels SP monitor system and VLF/Magnetometer system. These methods were successful in the detection of the seawater seepage zone. The self-potential method can give better resolution of the seepage zone than do VLF method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.26-31
• /
• 2005

The purpose of this study was to confirm paper strengthening properties with recently commercialized polyvinylamine. Because of its high cationic charge density, polyvinylamine has been investigated as a size retention and surface coating aids. In this study, we tried to confirm polyvinylamine as wet-end additives to improve dry and wet strength using LBKP and BCTMP pulps. As a result, we found improvement of dry and wet tensile properties of polyvinylamine with BCTMP were much better than LBKP condition. This phenomena could be explained that ionic bonding of cationic charge of polyvinylamine with abundant anionic substances of BCTMP was a very important factor to improve dry and wet strength of paper.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.879-884
• /
• 2012

Photoacoustic Tomography (PAT) is a promising medical imaging modality by reason of its particularity. It combines optical imaging contrast of optical imaging with the spatial resolution of ultrasound imaging and can demonstrate change of biological feature in an image. For that reason, many studies are in progress to apply this technic for diagnosis. But, real-time PAT system is necessary to confirm a biological reaction induced by external stimulation immediately. Thus, we developed a real-time PAT system using linear array transducer and self-developed Data acquisition board (DAQ) resources, To evaluate the feasibility and performance of our proposed system, two type of phantom test were also performed. As a result of those experiments, the proposed system shows enough performance and confirm its usefulness.