• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.203-206
• /
• 2009

Fibrous dysplasia is a slowly progressive, benign disorder characterized by fibrous tissue replacement of skeleton and may affect solitary or multiple bones. Monostotic fibrous dysplasia mainly occurrs in the rib, femur and tibia, however, rarely in the hand. We report a case of monostotic fibrous dysplasia confined to the 2nd metacarpal bone with findings of plain radiographs and MR imaging.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.5
• /
• pp.51-58
• /
• 2009

The total recovery ratio test on undisturbed clay soil sampling in the field and the finite element method analysis on modified static state of penetration process were conducted for the purpose of deciding the most important factor among the shape factors of thin wall tube. The adhesion between tube wall and soil did not decrease although internal clearance ratio of tube increased within the little change of tube area ratio. The most part of disturbance occurred in the tip of sampling tube during the penetration. The longitudinal displacement was larger than the lateral displacement because soil was confined laterally after being entered into tube, and also the longitudinal displacement was larger in the upper part of the sample tube than in the lower part.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.962-965
• /
• 2004

In this work, thin films of amorphous silicon (a-Si) were formed on plastic substrates by sputtering deposition and crystallized using excimer laser irradiation. As the entire process is conducted at room temperature, and the laser irradiation-induced heating is confined to the thin film, the plastic substrate is not subjected to thermal stresses. The microstructure resulting from the laser irradiation was dependent on the laser irradiation energy density and the composition of the underlying buffer layers. It was found that a layer of AlN deposited as a buffer between the plastic and the a-Si film increased the endurance of the a-Si film under laser irradiation, and resulted in polycrystalline Si grains up to 100nm in diameter.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.565-570
• /
• 1998

An objective of this study is to experimentally investigate the strength and ductility of reinforced concrete columns under uniaxial load and several test variables. To do this, we have conducted tests on twelve 20$\times$20$\times$60cm specimens with 8 and 12 longitudinal steel bars subjected to monotonic uniaxial compression. The main variables considered in this test are the configuration of ties, the strength of concrete, The results indicate that the strength and the ductility of reinforced concrete columns have been influenced on the configuration of ties, the strength of concrete.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.6
• /
• pp.583-593
• /
• 2003

The effect of liquid confined in a pipe on elastic waves propagating in the pipe wall was studied theoretically and experimentally. The axisymmetric motion of the wave was modeled with the cylindrical membrane shell theory. The liquid pressure satisfying the axisymmetric wave equation was included in the governing equation as a radial load. The phase speed of the wave propagating in the axial direction was calculated, accounting for the apparent mass of the liquid. Experiments were performed in a pipe equipped with ring-shaped, piezoelectric transducers that were used for transmitting and receiving axisymmetric elastic waves in the pipe wall. The measured wave speeds were compared with the analytical ones. This work demonstrates the feasibility of using pipe waves for the determination of the density and, eventually, the flow rate of the liquid in a pipe.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.39-58
• /
• 1998

In this research, first of all, the special feat-ures of Haute Couture design world (1990∼1996) prevailed in Paris and Rome are investigated, and additionally the understanding of collection concept and design structure analysis are performed to show the various method-ology of creative design. Expression method and design method are the main criteria in analyzing, and the main results of this research are summarized as follows : 1. Most of designers in Paris and Rome ex-press the traditional costume style. Paris designers are focusing on the expression of design morphology through the abstraction and re-appearance without being confined to theme expression ; Rome designers are expressing their main ideas utilizing the fashion image as their theme in lieu of expressing the design morphology. 2. Most of the designers in Paris and Rome are using simple lines for their design. Paris designers prefer the plastic design based upon formal and symmetrical balance of informal and asymmetrical balance to the partial trans-formation design ; Rome designers are enjoy-ing rather the partial transformation using the detail and trimming than the plastic design.

• Biomolecules & Therapeutics
• /
• v.1 no.2
• /
• pp.226-235
• /
• 1993

DA-125, a new anthracycline antitumor antibiotic, was administered to Sprague-Dawley rats intravenously for 4 weeks to investigate the repeated dose toxicity Focal alopecia was noted in three female rats receiving 1.0mg/kg/day. In rats receiving 1.0 mg/kg/day, weight gain decreased in both sexes after first or second week. Hematological examination revealed lower counts of total leukocyte and increased numbers of platelet after second week. At terminal necropsy, atrophy of thymus and spleen was observed. Lymphocytic depletion of thymus and atrophy of white pulp in spleen were observed microscopically. A decrease in the number of hematopoietic cells in the bone marrow and degeneration of germinal epithelia in testes were also observed. These treatment-related effects were mainly confined to rats receiving 1.0 mg/kg/day. And toxic effects with microscopic changes were not observed in rats receiving 0.2 mg/kg/day or 0.04 mg/kg/day.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.154-157
• /
• 2003

In order for testing faults of combinatorial logic circuit, the authors have developed a new diagnosis method: "Neural Network (NN) fault diagnosis", based on fm error back propagation functions. This method has proved the capability to test gate faults of wider range including so called SSA (single stuck-at) faults, without assuming neither any set of test data nor diagnosis dictionaries. In this paper, it is further shown that what kind of fault models can be detected in the NN fault diagnosis, and the simply modified one can extend to test delay faults, e.g. logic hazard as long as the delays are confined to those due to gates, not to signal lines.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.547-552
• /
• 1998

Lateral pressure by circular reinforcement greatly enhances the maximum strength and ductility of spiral columns. The lateral confinement effects will be improves ductility of high-strength concrete. The major purpose of this paper is to study on the improvements of maximum strength and strain at that point of spiral concrete columns subject to axial loads. For this purpose, this study collected the other analytical results and the experimental data that has been performed by a lot of worldwide researchers and also analyzed it statistically. As the result, the theoretical equation for predict maximum strength and strain at that point was proposed. It is based on calculation of lateral confinement pressure generated by circular reinforcement, and the resulting improvements in strength and ductility of confined concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.327-332
• /
• 2001

It is generally observed that steel fiber reinforced concrete with traditional straight steel fibers overcomes brittle nature of plain concrete by failure mechanisms by fiber pull-out rather than fiber rupture resulting from fiber yielding or concrete fracture at failured surface. Ring type steel fibers in concrete which is confined in concrete matrix and has better orientation, thus, lead to fiber yielding and concrete fracture as well as increase of flexural behavior of concrete more efficiently, Comparative experimental study is performed in order to measure the relative efficiencies of steel fiber reinforced concrete reinforced with two different fibers. It is found that better toughness is obtained from the ring type steel fiber reinforced concrete than from straight steel fiber reinforced concrete under flexural loading.