• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.856-859
• /
• 2010

WSN is composed of a lot of small sensors with the limited hardware resources. In WSN, at the initial stage, sensor nodes are randomly deployed over the region of interest, and self-configure the clustered networks by grouping a bunch of sensor nodes and selecting a cluster header among them. Specially, in Mobile-WSN environment, in which the administrator's intervention is restricted, the self-configuration capability is essential to establish a power-conservative Mobile-WSN which provides broad sensing coverage and communication coverage. In this paper, we propose a self-configuration routing protocol for Mobile-WSN, which consists of step-wise novel protocols for initial deployment, effective joining and removal of sensor nodes, which result in reducing overall power consumption, and extending the lifetime of network.

• Journal of the Korea Society for Simulation
• /
• v.13 no.4
• /
• pp.55-69
• /
• 2004

In MANET(Mobile Ad-hoc Network), unlike in wired networks, a path configuration should be in advance of data transmission along a routing path. Frequent movement of mobile nodes, however, makes it difficult to maintain the configured path and requires re-configuration of the path very often. It may also leads to serious problems such as deterioration of QoS in mobile ad-hoc networks. In this paper, we proposed a Reactive Routing Keyword (RRK) routing procedure to solve those problems. Firstly, we noticed it is possible in RRK routing to assign multiple routing paths to the destination node. We applied this feature into active networks and SNMP information based routing by storing unique keywords in cache of mobile nodes corresponding to present and candidate routings in a path configuration procedure. It was shown that the deterioration of QoS which may observed in Dynamic Source Routing(DSR) protocol was greatly mitigated by using the proposed routing technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.271-275
• /
• 2006

In STP, network performance differs depending on topology configuration. Therefore, we need to configure right topology for the optimal efficiency of networking. This paper suggest the optimal topology configuration for efficient networking between ethernet switchs. It finds out the best topology configuration by calculation mathematical model which uses transmission time between root switch and other switchs in the same domain. And it also analysed performance difference on locations of root switch. Through the performance analysis, we could conclude that placing the root switch in the center is the most efficient.

• Steel and Composite Structures
• /
• v.39 no.1
• /
• pp.35-50
• /
• 2021

Eccentrically braced frames (EBFs) are utilized as a lateral resisting system in high seismic zones. Links are the primary source of energy dissipation and they are exposed to high deformation, which may lead to buckling. Web stiffeners were introduced to prevent buckling of shear link. AISC 341 provides the required vertical stiffeners for a shear link. In this study, different stiffener configurations were examined. The main objective is to improve the behavior of short links using different stiffener configurations. Pursuant to this goal, a comprehensive numerical study is conducted using ABAQUS. Shear links with different stiffener configurations were subjected to cyclic loading using loading protocol mandated by AISC 341. The results are compared in terms of energy dissipation and shear capacities and rupture index. The proposed stiffener configurations were further verified with different link length ratios, I-shapes and thickness of stiffener. Based on the results, the stiffener configuration with two vertical and two diagonal stiffeners perpendicular to each other is recommended. The proposed stiffener configuration can increase the shear capacity, energy dissipation capacity and the ratio of energy/weight up to 27%, 38% and 30%, respectively. Detailing of the proposed stiffener configuration is presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.789-800
• /
• 2014

In this paper, we propose a cooperative protocol of relay-based WUSB/DRD and WLP device in WSS of ship area WiMedia environment. For this purpose, we investigate a RNT table configuration and algorithm of RNS relay node used in relay-based cooperative communication. Then, we describe a device that makes up WLP network and propose a cooperative protocol for WUSB/DRD/WLP device communication. The proposed cooperative protocol can communicate with WUSB/DRD/WLP devices by using standard DRP reservation and WUSB DRP reservation.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.27-38
• /
• 2013

Currently a number of managers exist to manage heterogeneous networks, in this situation, the NETCONF protocol for efficient network management has been proposed as a new protocol. However, the standard NETCONF protocol stack continuous improvement since the establishment but in four layers still have some problems. Especially in situations where there are multiple administrators, problems are more highlighted in operation layer. In this paper, we focus on these issues and the Operation layer has improved the efficiency and flexibility of operations among NETCONF four layers. Additionally, for the inefficiency of updates improved the device settings based on improved operation techniques. In addition, standard protocol NETCONF did not proposed content layer data structure and we propose standard technique of content layer that can generate configuration structure of devices. Improved the three techniques are applied appropriately to the NETCONF, the proposed method and the existing NETCONF was performed experiment to compare with experimental four factors. Compare key factor are four kind as maintaining the probability of network function, the reaction performance about command, the number of control packets, performance of data creation in content layer. Such factors after performing the experiment, the proposed method in this paper is superior to the existing NETCONF and there was confirmed by analysis Experimental results.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.69-81
• /
• 2002

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP-centric signaling and control architecture based on the generalized multi-protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross-connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS-based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user-network interface and network-network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to generalized MPLS signaling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.175-183
• /
• 1999

This paper describes the network configuration, No. 7 signaling IS-41.A protocol and basic operations for the RFC(Remote Feature Control) service which is one of the supplementary services provided in the mobile telephone network. In order to solve the protocol error occurred while providing the RFC service for analog system, this paper suggests three schemes and analyse detail signal algorithm for the proposed schemes. Through the simulations, it is verified the best choice of the proposed schemes without the signaling procedure error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1035-1037
• /
• 2009

Common to use fixed-node sensor network and wireless sensor networks, unlike the recent move of the node happens frequently. These wireless sensor networks by taking into account the mobility of sensor nodes dynamically self-configurable routing protocol is required. In this paper, a fixed-node configuration and energy efficiency in the self-LEACH protocol is based on the useful movement of the nodes of the cluster is dynamically self-configuring routing protocols offer M-LEACH.

• Journal of Animal Environmental Science
• /
• v.21 no.1
• /
• pp.9-20
• /
• 2015

The livestock manure recycling have been performed worldwide because of its environmental and economic benefits. However, domestic standard protocol was nothing for high solid manure. Therefore, This paper was conducted to review database configuration of manure characteristics, analysis methods, bio-methane potential test for high solid manure recycling. In American society of agricultural engineers standard, manure characteristics indicated about sort of thirty types. This is important information to determine for manure recycling method. Furthermore, in order to determine exact manure characteristics recommended that synchronized chemical analysis method among studies. Bio-methane potential tests are widely performed in studies about estimation of organic substrates methane production. Although various methods and parameters were used, was no standard protocol and guideline in domestic. Bio-methane potential test methods and parameters were reviewed through various researches. Consequently, this paper is expected that assist to additional studies and manure characteristic database.