• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.101-106
• /
• 2011

In this study, the velocity distribution according to upper side coner shape of underwater construction with rectangular cylinder was measured with PIV method and the wake flow characteristics was considered. According to the coner shape, the flow pattern of wake flow was also differed greatly and the step-shaped coner of cut-off ratio B/H=0.06 was similar in the slope shape in result.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.67-70
• /
• 1996

In this paper, the three-dimensional stress effect of thermal oxide is simulated. We developed the three-dimensional finite element numerical simulator including three-dimensional adaptive mesh generator that is able to refine and eliminate nearby moving boundary of oxide, and oxidation solver with stress model. The main effect of deformation at the coner area of oxide is due to distribution of oxidant, but the deformation of oxide is affected by the stress in the oxide. In the island structure which is the structure mostly covered with nitride and a coner is opened to oxidation, oxidation is reduced at the coner by compressive stress. In the hole structure which is the structure mostly opened to oxide and a coner is covered with nitride, however, oxidation is increased at the coner by tensile stress.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.2
• /
• pp.38-45
• /
• 1997

In this paper, the three-dimensional stress effect of thermal oxide is simulated. We developed a three-dimensional finite element numerical simulator including three-dimensional adaptive mesh generator that is able to refine and eliminate nearby moving boundary of oxide, and oxidation solver with stress model. To investigate the behavior of thermal oxidation the simulations of thermal oxidation for island and hole structures are carried out assuming silicon wafer of <100> direction, temperature of $1000^{\circ}C$, oxidation time of 60min, wet ambient, initial oxide thickness of $300\AA$, and nitride thickness of $2, 000\AA$. The main effect of deformation at the corner area of oxide is due to distribution of oxidant, but the deformation of oxide is affected by the stressin theoxide. In the island structure which is the structure mostly covered with nitride and a coner is opended to oxidation, oxidation is reduced at the coner by compressive stress. In the hole structure which is the structure mostly opedned to oxide and a coner is convered with nitride, however, oxidation is increased at the coner by tensile stress.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.6 no.1
• /
• pp.27-33
• /
• 2000

PURPOSE; The main purpose of this study is to develop a new learning model of Orthopedic Manual Therapy. METHOD; From 1997 to 1999, this survey was made of 318 students who had attended in Orthopedic Manual Therapy subject. RESULT; Results show that regard satisfaction with lecture was as 'good' by 235 person(73.3%). And the most interest subject among the therapists was orthopedic manual therapy(44.63%), next NDT(25.62%). CONCLUSION; This study suggest a new learning model of orthopedic manual therapy used by Role-play model and Coner study model. So we can be lecture effectively to focus students.

• Journal of architectural history
• /
• v.19 no.3
• /
• pp.107-124
• /
• 2010

The coner high column method that is used in the multi-roof building Sungryemoon seems to have been used for the first time during the Choseon Dynasty, and it's characteristics and trend of usage are studied in this paper. In the results, it was confirmed that the coner high column method is economic and structurally safe, and selectively combines the structural factors used in the Chinese seats. It was found that this method was a newly adopted construction method to effectively express the authority of the country with the establishment of a new dynasty. Also the meaning of the method could be guessed since it was continuously used in important structures from the Choseon Dynasty to the Daehan Empire, in spite of the new multi-roof building technologies.

• Journal of Integrative Natural Science
• /
• v.3 no.1
• /
• pp.43-48
• /
• 2010

본 논문은 지역 부분영상을 이용한 실시간 CCTV결합 시스템에 고나한 연구로써 프레임에 관한 결합 인식방법을 제안한다. 제안된 알고리즘은 기존에 비해 결합속도를 줄이고 이에 따라 전체적인 인식률을 높이는 것을 목표로 하고 있다. 기존 방법인 SIFT알고리즘은 특허가 있고 처리속도가 늦기 때문에 본 논문에서 개선된 지역영상 재생성 방식을 이용하여 실질적으로 CCTV 처리속도에 맞추어 속도를 높였다. 논문은 지역화 이미지를 이용하여 인식률과 속도를 바탕으로 전체적인 시스템 구현과 함께 알고리즘을 소개하는 것으로 구성되어 있으며 실제 실험을 통한 성능을 비교 평가 하였다. 실시간으로 동작하는 CCTV에 적용시킴으로 각각의 화면이 아닌 Inline System으로 감시자의 신체적 피로를 줄이고 경제적인 효과를 볼 수 있고 일반 사용자들도 쉽게 사용할 수 있는 저비용 시스템을 구축하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.18-24
• /
• 1995

Drilling chatter is regenerative type self-excited vibration and can be predicted by the measurments of the dynamic compliance between tool and workpiece based on structural dynamics and cutting dynamics. This paper describes the theoretical prediction about drilling chatter and the mechanism of the formation of multi-coner shape in holes by drilling chatter. By the experiments and theoretical study, it is found that the odd number of multi-coner shape is always generated by drilling chatter.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.2
• /
• pp.55-66
• /
• 2013

The experiment of model soil structures has been executed for the soil retaining wall in various conditions of excavation, in this study, to analyze the behavior of the corner of opening. The ground for experiment has been constituted with the sandy soil of relatively loose density, the construction condition has been divided into the opening length of corner, embedded depth, existence of strut, etc., and the excavation has been carried out for 4 stages in total. The behavior characteristics at the corner of opening area has been verified by concentrate analysis of the displacement of wall and the subsidence of ground surface, for each construction and excavation condition, using the measuring instrument mounted inside the model soil structure. In the result of experiment, it has been analyzed that the opening area of corner is unstable structurally compared to the linear area, as it shows that the wall displacement and subsidence of ground surface have been increased when the opening length of corner gets longer. The longer the embedded depth, ground surface settlement of coner was decreased 40%. To apply deeper embedded depth than designed estimate was an advantage in the safety. As a result of the analysis of coner behavior with added struts, maximum surface settlement and maximum horizontal displacement was evaluated 40% and 30%, respectively. Hence increased embedded depth with the added struts in coner edge was effective in the safety.

• Journal of the Korea Concrete Institute
• /
• v.11 no.4
• /
• pp.43-54
• /
• 1999

Shear tests are performed on four full-scale 12.5 m proto-type models, "least depth double tee," which are resulted from the optimization process. Domestic superimposed live load regulation, domestic material properties which is available to product. Korean building code requirements, construction environments and economy are considered as the main factors to establish the process. All of the specimens tested fully comply with the shear strength requirements as specified by ACI 318-95. The research has shown following results. 1) The development length requirement of ACI 318-95 does not seem a good predictor for the estimation of bond failure in a beam with the strands below the supports. 2) The load required for the first initial coner cracking in the dap end and first web shear cracking does not seem to have any relation with the dimension and shear strength of the section in the test beams. 3) The strand slip has a direct relationship with the web shear cracking. However, the coner cracking in the dap end does not give any help for the slip in anchorage. 4) Use of whole area for bearing steel at the bottom of dap end is desired for safe bearing pressure design in the precast prestressed double tee beams. 5) The deflection of beam influences directly on the amount of strand slip at the anchorage after initiation of it, and relationship between them are very linear.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.341-349
• /
• 2008

This study proposes new automatic thresholding method, which is important step for detecting binary change/non-change information using satellite images. Result value through pixel-based similarity measurement is calculated cumulatively with regular interval, and thresholding is pointed at the steep slope position. The proposed method is assessed in comparison with expectation-maximization algorithm and coner method using synthetic images, ALI images, and Hyperion images. Throughout the results, we validated that our method can guarantee the similar accuracy with previous algorithms. It is simpler than EM algorithm, and can be applied to the binormal histogram unlike the coner method.