• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.

• 구강회복응용과학지
• /
• 제17권2호
• /
• pp.113-123
• /
• 2001

The success of complete denture prosthesis is to satisfy three basic requirements for the edentulous patient : maximum comfort, efficiency, and esthetic appearance. This can be achieved only if the dentures are both stable and retentive. When the residual alveolar ridge has resorbed significantly, stability and retention are more dependent on the correct position of the teeth and external surfaces of the denture. The stability and retention of the denture can be improved by locating the denture in the neutral zone and reproducing exact mandibular border movement for balanced occlusion. The neutral zone philosophy is based upon the concept that there exists a specific area where the musculature function will not unseat the denture in the mouth. In here, forces generated by the tongue are neutralized by the forces generated by the lips and cheeks. One of the simplest methods for recording border movements in three dimensions is to make stereographic record of condylar movement. Stereographs are made in the mouth during mandibular movement with intraoral clutches and central bearing point, and used in dictating the condylar movement on the articulator later by generating the condylar paths in doughy acrylic resin. Its procedure is simpler and more convenient than that of Pantograph. In this clinical report, we introduce the concept of neutral zone and stereograph in complete denture fabrication.

• 대한치과교정학회지
• /
• 제32권5호
• /
• pp.313-325
• /
• 2002

3차원 CT에서는 환자의 움직임에 의한 오차와 상의 확대나 왜곡을 감소시킨 실측치를 얻을 수 있으며 두개안면부의 입체적인 영상을 구성할 수 있고 원하는 조직이나 구조물의 관찰이 용이하다 디지털 영상 기술이 빠르게 발전하고 있고 치료의 범위가 더욱 넓어지면서 두개악안면 구조의 3차원적인 분석법의 개발은 시급한 과제가 되었다. 이에 본 연구에서는 Vworks 프로그램$^{TM}$ (Cybermed Inc., Seoul, Korea)과 건조두개골을 이용하여 3차원 CT 영상의 오차와 확대율을 평가하고Vmorph-proto프로그램 $^{TM}$ (Cybermed Inc., Seoul, Korea)을 이용하여 정상인과 비대칭 환자의 3차원 CT영상에서 지정이 용이하고 반복재현성이 높은 계측점을 설정하고자 하여 다음과 같은 결론을 얻었다 ; 1. 건조두개골의 실측치와 Vworks 프로그램을 이용하여 구성한 3차원 CT영상에서 의 계측치를 비교한 결과 평균오차가 0.99mm, 확대율이 1.04%로 나타났다. 2. 3차원 CT영상에서 경조직 계측점으로 Supraorbitale, Lateral orbital margin, Infraorbitale, Natron, ANS, A point, Zygomaticomaxilla, Upper incisor, Lower incisor, B point, Pogonion, Menton, PNS, Condylar inner margin, Condylar outer margin, Porion, Condylion, Gonionl, Gonion2, Gonion3, Sigmoid notch, Basion 등이 임상적으로 유용하다고 판단되었다. 3. 3차원 CT영상에서 연조직 계측점으로 Endocanthion, Exocanthion, Soft tissue Nasion, Pronasale, Alare lateralis, Upper nostril point, Lower nostril point, Subnasale, Upper lip point, Cheilion, Stomion, Lower lip center, Soft tissue B, Pogonion, Menton, Preaurale 등이 임상적으로 유용하다고 판단되었다. Vworks 프로그램으로 3차원 CT영상을 구성하고 계측하는 것이 임상적으로 유용하다고 판단되었다. 또한 위에서 제안된 연조직 및 경조직 계측점들은 3차원 CT영상에서 반복 재현성이 높고 지정이 용이하며 해부학적 특징을 나타내주는 점들로 두개악안면 구조의 3차원적인 진단과 술전, 술후의 예측과 비교에 유용하게 사용될 것으로 사료되는 바이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권2호
• /
• pp.100-105
• /
• 2012

Purpose: In general, the surgical treatment for mandibular retrognathism is represented by two methods, distraction osteogenesis (DO) and mandibular osteotomy surgery. The DO is mostly preferred when the degree of advancement of mandible is large. However, the postoperative stability of mandibular advancement using DO have not been actively investigated. Therefore, in the present study we have compared the postoperative stability between DO and bilateral sagittal split ramus osteotomy (BSSRO) in mandibular retrognathism. Methods: Seven patients who had been treated by DO and thirteen patients with BSSRO were included in this study. Serial lateral cephalograms were analyzed by manual tracing and the amount of the mandibular elongation was measured. To evaluate the postoperative stability, positional changes of the condylar position and B point were analyzed. Results: Mean amount of mandibular advancement was $6.51{\pm}3.57mm$ for BSSRO group and $12.43{\pm}4.35mm$ for DO group, respectively. There was no significant difference in age between the two groups (P>0.05). Mean follow up periods were 10.77 months for BSSRO group and 11.28 months for DO group, respectively. After mandibular advancement, mean positional changes in the condyle were $0.56{\pm}1.43mm$ horizontally and $0.72{\pm}1.61mm$ vertically for BSSRO group and $0.53{\pm}1.56mm$ horizontally and $0.56{\pm}1.75mm$ vertically for DO group, respectively. Mean change of distance from B point to Y-axis was $-1.76{\pm}0.83mm$ for BSSRO group and $-2.14{\pm}1.82mm$ for DO group, respectively. According to the condylar position and B point, there were no significant differences in postoperative stability between the two groups (P>0.05). Conclusion: There was no significant difference in postoperative stability between DO and BSSRO group according to condylar position and B point. Based on the results of the present study, it is hypothesized that DO would be a good treatment choice for severe mandibular retrognathism because DO could achieve more mandibular advancement and concurrent soft tissue elongation.

• 대한관절경학회지
• /
• 제7권2호
• /
• pp.215-219
• /
• 2003

목적 : 단순 방사선 사진에서 슬관절 외측 원판형 연골판을 진단하는데 도움이 되는 새로운 방사선 소견인 대퇴외과 절삭 징후(cut-off sign)를 관찰하여 이를 보고하고, 이의 진단적 의의를 특이도, 민감도, 양성 예측도, 음성 예측도와 함께 보고하고자 한다. 대상 및 방법 : 관절경 시술로 확진 된 50예의 완전 원판형 연골군과 50예의 정상 대조군을 대상으로 하였으며, Tunnel view에서 보이는 대퇴 외과와 내과의 내측부의 최장 길이를 측정하여 비율을 비교 분석하였다. 결과 : 원판형 연골군에서 대퇴 내과부 길이와 외과부 길이의 비율의 평균은 0.716 이였으며, 정상 대조군에서는 0.902 이었다. 이를 T-test로 분석했을 때, t-value는 -11.13 (p<0.0001)로 두 군간에 매 우 유의 한 차이를 나타내었으며, 또한 경계값(cut point)을 0.8로 하여 chi-square test로 분석했을 때 통계적으로 두 군간에 유의한 차이가 있었으며, 민감도 $76\%$, 특이도 $100\%$였으며, 양성 예측도 $100\%$, 음성 예측도 $80.6\%$로 나타났다. 절삭 징후는 육안적으로도 뚜렷한 차이를 보여 원판형 외측 반월상 연골을 단순 방사선 사진에서 진단할 수 있는 매우 좋은 간접적인 소견이라고 생각한다. 결론 : 대퇴 외과 절삭 징후는 단순 방사선 검사의 Tunnel view에서 원판형 연골을 진단할 수 있는 좋은 방사선 소견이며, $100\%$의 특이도와 $100\%$의 양성 예측도를 나타내는 우수한 진단소견으로 판단된다.

• 치과방사선
• /
• 제10권1호
• /
• pp.47-55
• /
• 1980

The author analysed the routine radiographic changes and clinical symptoms of 205 cases of temporomandibular joint arthrosis. The clinical symptoms of the patients were classified and the morphological ylar head, articular eminence, and articular fossa were analized and discussed view point. The positional changes of condylar head and articular fossa relatation in TMJ arthrosis were observed. The frequencies of coincidence between the site of complaints and the site of the abnormal images which could be detected were examined. The results were obtained as follows; 1. Bone erosion, deformity, marginal proliferation and sclerosis were selected from many abnormal images as the radiographic diagnostic criteria of TMJ arthrotic lesions. 2. Abnormal radiographic findings were revealed in 150 cases (73.9%) of 205 total TMJ arthrosis cases and site with abnormal findings coincided with the site of complaints in 106 cases (70.7%) of 150 cases and coincidence rates were higher above fourth decades than below third decades. 3. Sclerosis of the abnormal radiographic findings could be found more often below third decades than above fourth decades. 4. The positional changes of condylar head were revealed in 176 cases (85.9%) of 205 total cases. 5. Pain complaints were revealed in 170 cases(82.9%) and clicking sounds were revealed in 120 cases (58.6%) of clinical symptoms of TMJ arthrosis. 6. No tendency was found so far the differential diagnosis between pain dysfunction syndrom and osteoarthrosis of TMJ.

• 대한치과보철학회지
• /
• 제23권1호
• /
• pp.137-144
• /
• 1985

This study was designed to investigate the side shift of orbiting condylar movement by direct measurements from tracings of Denar pantograph. It is well known that side shift has much influence on the articulating surface of teeth. In this study, after locating the ture hinge axis point with Denar hinge axis locatior, the recordings of Mandibular movement were obtained from Denar pantographic recording assembly, and immediate side shift and progressive side shift were measured. For this study, 20 dental studnts who have no missing teeth and no difficulties of mandibular movement and 4 patients who were, treated by occlusal therapy were selected. The results obtained were as follows, 1. The prevalence of immediate side shift was 42%, and the immediate side shift of greater than 0.5mm was only 17%. 2. The mean of immediate side shift (20 of 48) was 0.38mm, that of right lateral excursion (7 of 24) was 0.27mm, and that of left lateral excursion (13 of 24) was 0.44mm. 3. The mean of progressive side shift was $7.21^{\circ}$ that of right lateral excursion was $6.46^{\circ}$, and that of left lateral excursion was $7.96^{\circ}$.

• 치과방사선
• /
• 제23권2호
• /
• pp.373-378
• /
• 1993

저자들은 희귀한 하악과두의 골연골종으로 진단 내려진 27세 남성 환자에서 아래와 같은 사항을 관찰하였다. 1. 임상적으로 좌측안면부의 비대칭과, 교합이상 그리고 저작 시 좌측 악관절의 동통이 있었다. 2. 방사선학적으로 좌측과두에 내측으로 균일한 방사선불투과성의 종괴가 보였으며, 좌측 하악지 길이의 증가 및 우측으로의 하악 변위가 관찰되었다. 또 골스캔상에서 좌측 악관절부위의 hot spot이 관찰되었다. 3. 조직병리학적으로 불규칙한 골의 형성과 연골모를 볼 수 있었다.

• 대한치과교정학회지
• /
• 제41권2호
• /
• pp.87-97
• /
• 2011

안면비대칭의 원인은 다양하며, 비대칭적 성장은 상악골과 하악골의 길이나 각도로 평가되어지곤 한다. 하지만 하악 과두의 비대칭적인 위치나 형태 또한 비대칭의 표현에 영향을 줄 것으로 생각된다. 따라서 본 연구는 하악 과두가 안면비대칭의 표현형인 이부 편위에 영향을 주는지에 대해 알아보고자 하였다. 50명의 골격성 III급 부정교합자 중 4 mm 이상의 menton point deviation을 보이는 비대칭군 30명, 4 mm 이하의 menton point deviation을 보이며 뚜렷한 안면비대칭이 없는 20명을 대칭군으로 하여, 두개저에 대한 좌우 하악 과두의 근원심적, 전후방적 위치를 평가하고, axial 평면에서 장축을 설정해 하악 과두의 최대 크기와 coronal plane에 대한 각도를 평가하였으며, sigmoid notch 상방 하악 과두의 길이와 부피를 측정하였다. 대칭군은 좌우 하악 과두의 위치, 각도, 크기, 길이, 부피에 있어 통계적인 차이가 없었다. 비대칭군은 이부 편위측과 비편위측으로 나누어볼 때, 이부 편위에 따른 좌우 하악 과두의 위치와 angulation 에서 통계적 차이는 없었으나, 하악 과두의 크기, 길이 및 부피에서는 비편위측 값이 컸고, 이부 편위량이 클수록 좌우 크기, 길이의 차이 및 편위측에 대한 비편위측 하악 과두의 부피비가 컸다. 또한 편위측에 대한 비편위측 하악 과두의 부피비가 이부 편위의 정도를 가장 잘 설명해주는 특성이었다. 이상의 결과를 통해 하악 과두의 비대칭이 안면비대칭의 발현에 영향을 주며, 비편위측 하악 과두가 편위측에 비해 크고 길다는 것을 알 수 있었다.

• Journal of Oral Medicine and Pain
• /
• 제25권2호
• /
• pp.205-214
• /
• 2000

This study was performed to investigate the relationship between mandibular midline shift and anteroposterior first molar occlusal relation, and their effects on the mandibular height and the occlusal plane angle. For this study, 49 patients with temporomandibular disorders were selected. They did not show facial asymmetry and their facial midline coincide with maxillary dental midline. Upper and lower mandibular impression were taken and the casts were fabricated. Amount and direction of the mandibular midline shift and the anteroposterior shift between the two occluding first molars were measured on the casts. Several items related to height such as mandibular height from top of the articular surface of the condyle to curve changing point between antegonial notch and mandibular angle, condylar height which was the vertical distance from the articular surface to retroepicondyle of the condyle, and sigmoid height from the deepest point of sigmoid notch to the curve changing point and the occlusal plane angle were also measured on the panoramic and on the transcranial radiographs. Correlation between midline shift and anteroposterior first molar relation and comparison between right and left mandibular height by the midline shift and the first molar relation were analysed by SPSS windows program. The results of this study were as follows : 1. Mean amount of midline shift in the subjects with midline shift were 2.0mm for both side, respectively. The first molar relation of the ipsilateral side of midline shift showed Angle class II tendency and the contralateral side showed Angle class III tendency, which meant drift of the dentition to the side of the midline shift. 2. The occlusal plane angle on the panoramic radiograph were $13.0^{\circ}$ in right, and $12.5^{\circ}$ in left side, and their were no correlation between occlusal plane angle and mandibular midline shift and the first molar occlusal relation. 3. Angle's classification for both sides of the first molar relation were same in about half of all the subjects. Amount of deviation from class I first molar relation, however, were decreased in the contralateral side of observed side. 4. Mandibular height of the ipsilateral side to which mandibular midline shift showed tendency of lower than that of the contralateral side, and there was a tendency that the height was higher in class III subjects, then class II subjects, and lower in class I subjects. However, condylar height did not show any difference in the subjects with midline shift and also show no difference by the first molar occlusal relation.