• 한국자기학회지
• /
• 제14권5호
• /
• pp.174-179
• /
• 2004

고주파 회로에서 발생하는 전도 노이즈의 흡수율을 측정하는 방안의 하나로 50 $\Omega$ 특성 임피던스의 마이크로스트립 선로를 제작하고, 순철 압분체로 구성되는 자기손실재의 전력 흡수율 측정을 통하여 측정 및 해석 방법의 타당성을 제시하였다 제작된 마이크로스트립 선로는 S$_{11}$ < -60 dB, S$_{21}$=0 dB의 반사/투과 특성을 보여 전도 노이즈 흡수율 측정에 이상적인 전송특성을 보였다. Attrition milling에 의해 순철 압분체를 제작하고, 이를 고무와 혼합하여 두께 1mm정도의 복합재 sheet를 제작하였다. 이 재료를 마이크로스트립 선로에 장착한 결과 2～8 GHz대역에서 전력흡수율이 80% 이상인 대역저지 필터와 유사한 특성을 얻을 수 있었다. 주파수, 흡수 sheet 크기에 따른 노이즈 흡수율에 관한 분석을 통하여, 노이즈 흡수율에 주된 영향을 주는 인자는 자기손실임을 제안하였다.

• 한국자기학회지
• /
• 제17권6호
• /
• pp.242-245
• /
• 2007

전자기적 해석 시뮬레이션 프로그램인 유한요소 방식의 HFSS(High Frequency Structure Simulation)를 사용하여, 전도 노이즈 흡수 sheet의 흡수특성을 해석하고 그 결과 값을 실측값과 비교함으로써 해석방법의 타당성을 검토하였다. 마이크로스트립 선로는 $S_{11}\simeq-30dB,\;S_{21}=0dB$의 반사투과 특성을 보여 전도 노이즈 흡수율 측정에 이상적인 전송특성을 보였다. 순철 압분체-고무 복합체 sheet의 복소비투자율과 복소비유전율을 입력하여 노이즈 흡수율을 계산한 결과 실측치와 비교적 잘 일치하는 해석결과를 얻었다. 주파수, 흡수계의 크기(특히 선로를 덮는 길이)에 따라 노이즈 흡수율은 현저한 변화를 보였으며, 이는 재료의 손실 특성과 밀접히 연관되어 있음을 제시하였다. 이러한 해석방법은 다양한 조성 및 크기의 전도 노이즈 흡수체의 설계에 유용히 사용될 수 있음을 제안할 수 있다.

• 한국추진공학회지
• /
• 제13권2호
• /
• pp.64-76
• /
• 2009

대향류확산화염에서 화염소화와 에지화염 진동 특성에 관한 실험 및 수치해석 연구가 수행된다. 이러한 특성들은 버너 직경, 버너간 거리, 전체신장율, 그리고 속도비를 변화시키며 묘사된다. 실험과 수치해석으로부터 반경방향으로 전도열손실이 미소중력 및 중력 조건에서 화염소화와 에지화염 진동에 크게 기여한다는 것이 입증된다. 적절히 작은 버너직경을 사용한 경우에 화염 소화 모드는 4가지로 분류되며, 과다한 반경방향 열손실에 기인한다는 것이 밝혀진다. 에지화염 진동은 Strouhal 수와 Peclet 수에 의해 하나의 곡선으로 잘 특성화된다.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.203-210
• /
• 2012

기존의 DC-DC 부스트 변환기에 사용되는 non-overlapping gate driver는 dead-time이 고정되어 있기 때문에 body-diode conduction loss 또는 charge-sharing loss가 발생하는 문제점을 가지고 있다. 이러한 loss에 의한 효율 감소를 줄이기 위해 본 논문에서는 dead-time 적응제어 기능을 갖는 PWM DC-DC 부스트 변환기를 설계하였다. 제안된 DC-DC 부스트 변환기는 CMOS $0.35{\mu}m$ 공정으로 설계되었고, 입력전압 2.5V를 받아서 3.3V의 출력전압으로 승압시킨다. 스위칭 주파수는 500kHz이며, 최대효율은 97.3%이다.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.592-601
• /
• 2016

This paper presents the modeling of insulated-gate bipolar transistor (IGBT) in electromagnetic transients program (EMTP) simulation for the reliable calculation of switching and conduction losses. The conventional approach considering the physical property of switching devices requires many attribute parameters and large computation efforts. In contrast, the proposed method uses the curve fitting and interpolation techniques based on typical switching waveforms and a user-defined component with variable resistances to capture the dynamic characteristics of IGBTs. Therefore, the simulation time can be efficiently reduced without losing the accuracy while avoiding the extremely small time step, which is required in simulation by the conventional method. The EMTP based simulation includes turn-on and turn-off transients of IGBT, saturation state, forward voltage of free-wheeling diode, and reverse recovery characteristics, etc. The effectiveness of proposed modeling for the EMTP simulation is verified by the comparison with experimental results obtained from practical implementation in hardware.

• 한국재료학회지
• /
• 제21권7호
• /
• pp.377-383
• /
• 2011

Thermoelectric power, dc conductivity, and the dielectric relaxation properties of $La_2NiO_{4.03}$ are reported in the temperature range of 77 K - 300 K and in a frequency range of 20 Hz - 1 MHz. Thermoelectric power was positive below 300K. The measured thermoelectric power of $La_2NiO_{4.03}$ decreased linearly with temperature. The dc conductivity showed a temperature variation consistent with the variable range hopping mechanism at low temperatures and the adiabatic polaron hopping mechanism at high temperatures. The low temperature dc conductivity mechanism in $La_2NiO_{4.03}$ was analyzed using Mott's approach. The temperature dependence of thermoelectric power and dc conductivity suggests that the charge carriers responsible for conduction are strongly localized. The relaxation mechanism has been discussed in the frame of the electric modulus and loss spectra. The scaling behavior of the modulus and loss tangent suggests that the relaxation describes the same mechanism at various temperatures. The logarithmic angular frequency dependence of the loss peak is found to obey the Arrhenius law with activation energy of ~ 0.106eV. At low temperature, variable range hopping and large dielectric relaxation behavior for $La_2NiO_{4.03}$ are consistent with the polaronic nature of the charge carriers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.76-79
• /
• 2000

The 3$\mu\textrm{m}$-thick PVDF (Polyvinyiidene fluoride) thin film have been prepared using physical vapor deposition with electric field, and its FT-IR specrum, dielectric property and electric conduction phenomenon have been investigated. Since the characteristic peaks ate detected at 509.45 and 1273.6〔cm〕 in the FT-IR spectrum, we are confirmed that the ${\beta}$ -phase is dominant in the PVDF thin film. In the results of dielectric properties, the PVDF thin film shows anomalous dispersion, i.e. gradual decrease of dielectric constant with increase of frequency, and also that the dielectric absorption point changes from 200Hz to 7000Hz with increasing temperature of thin film, which is consistent with the Debye's theory. The activation energy (ΔH) obtained from temperature dependence of dielectric loss is 21.64 ㎉/㏖. We confirm that the electric conduction mechanism of PVDF thin film is dominated by ionic conduction by investigating the dependence of the leakage current of the thin film on the temperature and the electric field.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.80-85
• /
• 2015

In the issues of interleaved topology which have been in limelight as high power converter, various soft-switching methods are studied to reduce switching losses in high power application. The interleaved ZCT converter has an additional filter inductor to reduce losses of diodes during reverse recovery process. However, additional current conduction modes are occurred by the inductor, we need to analyze switching losses with inductor values on each mode. In this paper, current conduction modes and boundary conditions of interleaved ZCT converter are analyzed. In the conclusion, the minimum of switching losses in converter operation modes is analyzed by calculating switching losses.

• 수산해양교육연구
• /
• 제9권2호
• /
• pp.209-221
• /
• 1997

This paper presents a soft switching unity power factor PWM rectifier, which features reduced conduction losses and soft switching with no auxiliary switches. The soft switching are achieved by using a simple commutation circuit with no auxiliary switches, and reduced conduction loses are achieved by employing a single converter, instead of a typical front end diode rectifier followed by a boost rectifier. Furthermore, thanks to good features such as simple PWM control at constant frequency, low switch stress and low VAR rating of commutation circuits, it is suitable for high power applications. The principle of operation is explained in detail, and major characteristics analysis and experimental results of the new converter also included.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.275-287
• /
• 2009

This paper investigates analytical models of Conduction and Switching Losses (CASLs) of a matrix-Z-source converter (MZC). Two analytical models of the CASLs are obtained through the examination of operating principles for a Z-source inverter and ac-dc matrix converter respectively. Based on the two models, the analytical model of CASLs for a MZC is constructed and visualized over a range of exemplified operating- points, each of which is defined by the combination of power factor (pt) and modulation index (M). The model provides a measurable way to approximate the total losses of the MZC.