• 한국콘텐츠학회논문지
• /
• 제10권10호
• /
• pp.237-245
• /
• 2010

신경전도검사는 당뇨병성다발신경병증 및 당뇨병의 불현성 신경병증환자를 진단하기위한 중요한 검사이며 신경의 기능을 정량적으로 측정할 수 있는 검사기법이다. 본 연구에서는 당뇨병성다발신경병증 환자에서 보이는 전기생리학적 특징을 평가하기위하여 당뇨병성다발신경병증으로 진단된 120명과 정상대조군 77명의 운동신경전도검사의 결과를 비교?분석하였다. 상지와 하지의 각 운동신경에서 정상기준치에 대해 비정상 값을 보인 비율의 특징을 신경전도속도, 말단잠복기, 복합근육활동전위의 진폭, No potential의 빈도, 전도차단의 항목으로 나누어 분석하였다. 당뇨병성다발신경병증은 상지에 비해 하지를 더욱 침범하는 전신성 탈수초성 말초다발신경병증의 전기생리학적 특징이 관찰되었고, 특히 비골신경에서 비정상의 정도가 심한 것으로 분석되었다. 하지만 전도차단의 특징은 대조군에 비하여 유의한 차이가 없는 것으로 나타났다. 운동신경전도검사의 결과를 분석하여 당뇨병성다발신경병증의 전기생리학적 특징을 분석한 본 연구의 결과 하지의 비골신경이 중요한 지표가 될 수 있음이 확인되었고, 이는 당뇨병성다발신경병증의 중요한 전기생리학적 소견으로 사료된다.

• 조명전기설비학회논문지
• /
• 제22권6호
• /
• pp.34-43
• /
• 2008

상태 공간 평균화 모델은 강압형, 승압형 및 승 강압형 DC/DC 컨버터에 적용이 가능하며, 특별한 계산이 필요 없는 높은 정밀도가 증명된 모델이다. 이러한 모델은 전류연속모드(CCM) DC/DC 컨버터에서 확립되었으며, 본 논문에서는 컨버터의 전류연속모드(CCM) 모델로부터 의미 있는 결론을 유도하고자 한다. 본 논문에서는 스위치 평균모델을 이용한 DC/ DC 컨버터의 전류불연속모드(DCM) 모델링 및 임계특성에 관하여 논하였다. 스위치 평균 모델은 전류연속모드(CCM)와 전류불연속모드(DCM) 사이의 DC/DC 컨버터의 경계 조건에 대한 모델로부터 유추할 수 있으며, 시뮬레이션과 실험에 의해서 스위치의 평균 모델의 주파수 응답 특성을 예측할 수 있었다. 본 연구에서는 MOSFET를 사용하여 입력전압 15[V], 출력전압 24[V], 출력전력 24[W]급 시스템을 제작하여 실험하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1635-1638
• /
• 1997

A measurement of conduction veloctiy of the action potentials along the muscle fibres has been applied to various diagnosis. When we measure muscle fiber conduction velocity, it occurs that not only change of conduction velocity but alos inclusion of mipulse component by physiological and experimental reason. So, robuster time delay estimation algorithm than general methods[1] is needed to find correct time delay form these signals. In this paper we, propose new time delay estimation algorithms, robust in impulsive noise, by using characteristic of .alpha.-stable distribution whcih defines impulsive noise well. Then we apply proposed algorthms to measure muscle fiber conduction velocity and compare them with other studies.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.453-460
• /
• 1997

In order to investigate the electrical conduction properties of polyethylene thin film for power cable with manufacturing methods, the thickness of specimen was the 30, 100[${\mu}{\textrm}{m}$] of LDPE and 200[${\mu}{\textrm}{m}$] of XLPE were manufactured. The experimental condition for conduction properties was measured until the breakdown occurs at temperature ranges from 30 to 110[$^{\circ}C$] and the electric field from 1$\times$10$^3$to 5$\times$10$^{6}$ [V/cm]. As for increase of temperature, the current density of LDPE was increased with constant ratio in low field, but changes with exponential function in high electric field. The tunnel current of pre-breakdown region is shifted toward low field as much as thermal excitation energy. At low electric field, the XLPE showed dominant electrical conduction properties by thermal excitation, and transformation of the electron was resisted by the crystal at high electric field.

• 설비공학논문집
• /
• 제16권6호
• /
• pp.546-555
• /
• 2004

With circular tube heated directly or indirectly placed in a cross flow, heat flows circumferentially by conduction due to the asymmetric nature of the fluid flow around the perimeter of the circular tube. The circumferential heat flow affects the wall temperature distribution to such an extent that in some cases. The effects of circumferential wall heat conduction on local convective heat transfer is investigated. The wall heat conduction parameter which can be deduced from the governing energy equation should be used to express the effect of circumferential heat conduction. Two-dimensional temperature distribution is presented through the numerical analysis. The comparison of one-dimensional and two-dimensional solutions is demonstrated on graph of local Nusselt numbers.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.95-100
• /
• 2012

In this study, a novel Cu composite sheet with embedded high electric conduction path was developed as another alternative for the interconnect materials possessing high electrical conductivity as well as high strength. The Cu composite sheet was fabricated by forming Ag conduction paths not within the interior but on the surface of a high strength Cu substrate by damascene electroplating process. As a result, the electrical conductivity increased by 40% thanks to mesh type Ag conduction paths, while the ultimate tensile strength decreased by 20%. The interfacial fracture resistance of Cu composite sheet prepared by damascene electroplating increased by above 50 times compared to Cu composite sheet by conventional electroplating. For feasibility test for practical application, a leadframe for LED module was manufactured by a progressive blanking and piercing processes, and the blanked surface profile was evaluated as a function of the volume fraction of Ag conduction paths. As Ag conduction path became finer, pressing formability improved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.219-222
• /
• 1998

The space charge and conduction characteristics of chemically modified vinylpyridine (VP) grafted low density polyethylene (LDPE) was investigated. VP grafted LDPE was analyzed by elemental analysis (EA) to confirm the grafting reaction. Homocharge was developed in VP grafted LDPE at low graft ratios and changed to heterocharge with increasing the content of VP. In conduction experiment, current densities of VP grafted LDPE were lower than that of LDPE and VP grafted LDPEs showed almost the same conduction characteristics as vinylpyridine graft ratio increased

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.683-689
• /
• 2007

Grain-boundary conduction in the fluorite-structure solid oxide electrolytes such as acceptor-doped zirconia and ceria were reviewed. The siliceous impurity, even several hundreds ppm, affects the ionic conduction across grain boundary to a great extent. Various approaches to improve grain-boundary conduction in fluorite-structure oxide electrolytes have been investigated, which include (1) the scavenging of siliceous phase by the reaction with second phase, (2) the gathering of intergranular siliceous phase into a discrete configuration and (3) the dewetting of intergranular liquid phase by post-sintering heat treatment.

• 동력기계공학회지
• /
• 제3권3호
• /
• pp.14-21
• /
• 1999

The wave nature of heat conduction has been developed in situations involving extreme thermal gradients, very short times, or temperatures near absolute zero. Under the excitation of a periodic surface heating in a finite medium, the hyperbolic and parabolic heat conduction equations and the damped wave equations in heat flux are presented for comparative analysis by using the Green's function with the integral transform technique. The Kummer transformation is also utilized to accelerate the rate of convergence of these solutions. On the other hand, the temperature distributions are obtained through integration of the energy conservation law with respect to time. For hyperbolic heat conduction, the heat flux distribution does not exist throughout all the region in a finite medium within the range of very short times(${\xi}<{\eta}_l$). It is shown that due to the thermal relaxation time, the hyperbolic heat conduction equation has thermal wave characteristics as the damped wave equation has wave nature.

• Annals of Clinical Neurophysiology
• /
• 제8권1호
• /
• pp.102-105
• /
• 2006

We present a case with stepwise weakness and sensory involvement of both hands for more than 2 months. His nerve conduction study findings revealed prolonged terminal latencies, decreased motor and sensory conduction velocities and conduction blocks of both ulnar nerves, more severely on left side. And there were other abnormalities manifested with mononeuropathy multiplex. Increased cerebrospinal fluid protein was found. We diagnosed him as Lewis-Sumner syndrome and tried high dose oral steroid therapy for 2 months. He showed improvement of motor functioning with persistent conduction block.