• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.5
• /
• pp.431-436
• /
• 2014

Conductance is a concept contrary to flow resistance and is extensively used as a flow index on how easily fluid is transported through a pneumatic pipe or fluid device. However, research on flow conductance is very rare to date, and a systematic investigation is needed for the standardization of pneumatic devices. In the present study, a computational fluid dynamics method was applied to solve the compressible Navier-Stokes equations with two-equation turbulence models. The present CFD results were validated with existing experimental data. The conductance values and friction factors at the inlet and outlet of a pneumatic pipe were used to assess the flow rates. The present results showed that the conductance depends on the pressure ratio at the inlet and outlet of a pipe.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.354-358
• /
• 2013

This paper discusses the analysis of arc conductance in a gas circuit breaker (GCB) during current interruption process and the investigation method of the interruption capability. There are some limitations in the application of the computational fluid dynamics (CFD) for the implementation of an arc model around the current zero, despite the fact that it gives good results for the high-current phase arc. In this study, we improved the accuracy in the analysis of the interruption performance by attempting the method using CFD and a mathematical arc model. The arc conductance at 200 ns before current zero (G-200ns) is selected as the indicator to predict the current interruption of the Short Line Fault (SLF). Finally, the proposed method is verified by applying to the actual circuit breakers which have different interruption performances.

• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.18-23
• /
• 2012

A method to determine the equivalent circuits of broadband ultrasound transducers is necessary for designing filters that match the impedances of the transducer and the analysis of the transducer. A method is proposed to determine the equivalent circuits of broadband transducers with 2 resonances in the frequency band of interest. The circuit parameters are estimated by iterative Levy method with the measured electrical conductance data. The method is illustrated by computing the conductance and susceptance of the equivalent circuits of 3 types of broadband transducers. The equivalent circuit of a transducer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.2
• /
• pp.149-157
• /
• 2008

During CVD process of semiconductor wafer fabrication, maintaining the uniformity of temperature distribution at wafer top surface is one of the key factors affecting the quality of final products. Effect of contact conductance between wafer and hot plate on predicted temperature of wafer was investigated. The validity of opaque wafer assumption was also examined by comparing the predicted results with Discrete Ordinate solutions accounting for semitransparent radiative characteristics of silicon. As the contact conductance increases predicted wafer temperature increases and the differences between maximum and minimum temperatures within wafer and between wafer and hot plate top surface temperatures decrease. The opaque assumption always overpredicted the wafer temperature compared to semitransparent calculation. The influences of surrounding reactor inner wall temperature and hot plate configuration are then discussed.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.2 s.7
• /
• pp.50-56
• /
• 2000

The effects of lobe shapes on the leak flow conductance of Roots-type vacuum pump are studied numerically and experimentally. The modelled lobe shape of Roots-type vacuum pump is two-lobe spur gear. The numerical analyses are performed on leak flows in Roots-type vacuum pump. It is numerically calculated using a 4th-order Runge-Kutta method and is compared with experimental results. Results show that for the case of involute lobe shape the total amount of the leak flow conductance is greater than that of cycloid and Cassini oval lobe shapes.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.17-22
• /
• 2011

Techniques for mismatch loss minimization to increase the PV system efficiency are under development recently. In this paper, a method to make diagnosis of PV module mismatch is presented, which uses a concept of operating point factor. The method is based on the fact that the ratio of the incremental conductance of a PV module to instantaneous conductance is 1 when the module is operating at its maximum power point. The variations of module voltage and current are taking place by the maximum power point tracker in the power conditioning units of PV system. The effectiveness of the method is verified through an application to a real PV system.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1544-1553
• /
• 2019

The efficiency of photovoltaic generation systems depends on the maximum power point tracking (MPPT) technique. Among the various schemes presented in the literature, the incremental conductance (INC) method is one of the most frequently used due to its superb tracking ability under changes in insolation and temperature. Generally, conventional INC algorithms implement a simple duty-cycle updating rule that is mainly found on the polarity of the peak-power evaluation function. However, this fails to maximize the performance in both steady-state and transient conditions. In order to overcome this limitation, a novel regulated INC (r-INC) method is proposed in this paper. Like the compensators in automatic control systems, this method applies a digital compensator to evaluate the INC function and improve the capability of power tracking. Precise modeling of a new MPPT system is also presented in the optimized design process. A 120W boost peak power tracker is utilized to obtain comparative test results and to confirm the superiority of the proposed method over existing techniques.

• Carbon letters
• /
• v.28
• /
• pp.60-65
• /
• 2018

Linear carbon chains (LCCs) encapsulated inside the hollow cores of carbon nanotubes (CNTs) have been experimentally synthesized and structurally characterized by Raman spectroscopy and transmission electron microscopy. However, in terms of electronic conductivity, their transportation mechanism has not been investigated theoretically or experimentally. In this study, the density of states and quantum conductance spectra were simulated through density functional theory combined with the non-equilibrium Green function method. The encapsulated LCCs inside (5,5), (6,4), and (9,0) single-walled carbon nanotubes (SWCNTs) exhibited a drastic change from metallic to semiconducting or from semiconducting to metallic due to the strong charge transfer between them. On the other hand, the electronic change in the conductance value of LCCs encapsulated inside the (7,4) SWCNT were in good agreement with the superposition of the individual SWCNTs and the isolated LCCs owing to the weak charge transfer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.167-167
• /
• 2011

한국표준과학연구원에서는 국제표준화기구에서 제정한 국제규격(ISO, PNEUROP, DIN, JIS, AVS 등)에 기반을 둔 터보분자펌프의 특성평가시스템을 자체적으로 설계/제작 하였고, 터보분자펌프 1,000 L/s 급의 Database를 구축하였다. 이것을 토대로 특성평가시스템의 신뢰성 확인과 Feedback을 통한 시제품 개발 및 평가지원을 위해 터보분자펌프 2,500L/s 급의 Database를 구축한다. 터보분자펌프의 배기성능을 나타내는 가장 중요한 항목인 배기속도는 분자류 영역에 따라 상이한 가스($N_2$, He)를 사용하여 Throughput method와 Orifice method 두 가지 방법을 병행하여 측정한다. 측정함에 있어서 측정게이지, 유량계 및 Orifice conductance의 불확도에 의하여 배기 속도에 많은 측정오차를 포함하고 있다. 측정 오차를 줄이기 위하여 1% 이상의 안정성과 4%의 오차만을 허용하는 자전 회전자게이지(SRG)와 $10^{-3}$ mbar-L/s 영역까지의 유량 주입범위를 가지는 불확도 ${\pm}$3%의 정적형 유량시스템(CVFM)을 사용하였다. Orifice method의 경우 고진공영역으로 진입할수록 커질 수밖에 없는 배기속도 측정 불확도를 최소화하기 위해 검증된 유량을 이용한 Conductance 값을 제시하여 두 방법에서 얻은 배기속도의 불연속적인 문제를 해결한다. 본 연구에서는 2,500 L/s 급 터보분자펌프는 무거운 기체 $N_2$와 가벼운 기체 He을 사용하여 압축비의 변화와 분자류 영역에 따른 배기속도 변화를 연구하고, 2,500 L/s 급 터보분자펌프의 측정능력을 검증한다. 차후에 배기속도뿐만 아니라 소비전력, 소음, 진동, 온도 등의 특성평가의 전반적인 사항을 평가하여 터보분자펌프 2,500 L/s 급의 database를 완비해간다. 터보분자펌프 특성평가시스템을 사용한 1,000 L/s 급과 2,500 L/s 급 특성 Data를 비교, 분석하여 신뢰성 파악 및 표준화 방안을 개발하고, 고진공펌프 개발 주체와의 feedback 지원 기능의 infra를 구축한다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.474-480
• /
• 2017

In this study, the evolution of electrical impedance of electric nodes was investigated to determine the setting time of cement paste using the electrical impedance spectroscopy method. The electric nodes were embedded in fresh cement paste and the electrical impedance signatures were continuously monitored. Vicat needle test and semi-adiabatic calorimetry test were also conducted to validate the electrical impedance spectroscopy method. During hydration period of cement paste, the magnitude of conductance gradually increased, and then started to decrease rapidly at a first certain time. After that, the magnitude of conductance gradually decreased at a second certain time. The times of turning point in the curves of magnitude of conductance seem to be related with the setting time by Vicat needle test. Also, the setting times by the electrical impedance spectroscopy method are well posed within the setting period estimated by the semi-adiabatic calorimetry test. Based on the results, it can be concluded that the setting time of cement paste can be effectively monitored through the electrical impedance spectroscopy method.