• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.1
• /
• pp.40-49
• /
• 1986

Crack, craze and void are common defects which may be found in the bulk of polymeric materials such as either themoplastics or thermosets. The healing phenomena, autohesion, of these defects are known to be a intrinsic material property of various polymeric materials. However, only a few experimental and theoretical investigations on crack, void and craze healing phenomena for various polymeric materials have been reported up to date [1, 2, 3]. This may be partly due to the complications of healing processes and lacking of appropriate theoretical developments. Recently, some investigators have been urged to study the healing phenomena of various polymenic materials since the significance of the use of polymer based alloys or composites has been raised in terms of specific strength and energy saving. In the earlier published reports [1, 2, 3, 4], the crack and void healing velocity, healing toughness and some other healing mechanical and physical properties were measured experimentally and compared with predicted values by utilizing a simple model such as the reptation model under some resonable assumptions. It seems, however, that the general acceptance of the proposed modeling analyses is yet open question. The crack healing processes seem to be complicate and highly dependent on the state of virgin material in terms of mechanical and physical properties. Furthermore, it is also strongly dependent on the histories of crack, craze and void development including fracture suface morphology, the shape of void and the degree of disentanglement of fibril in the craze. The rate of crack healing may be a function of environmental factors such as healing temperature, time and pressure which gives different contact configurations between two separated surfaces. It seems to be reasonable to assume that the crack healing processes may be divided in several distinguished steps like stress relaxation with molecular chain arrangement, surface contact (wetting), inter- diffusion process and com;oete healing (to obtain the original strength). In this context, it is likely that we no longer have to accept the limitation of cumulative damage theories and fatigue life if it is probable to remove the defects such as crack, craze and void and to restore the original strength of polymers or polymer based compowites by suitable choice of healing histories and methods. In this paper, we wish to present a very simple and intuitive theoretical model for the prediction of healed fracture toughness of cracked or defective polymeric components. The central idea of this investigation, thus, may be the modeling of behavior of chain molecules under healing conditions including the effects of chain scission on the healing processes. The validity of this proposed model will be studied by making comparisons between theoretically predicted values and experimentally determined results in near future and will be reported elsewhere.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.3
• /
• pp.209-231
• /
• 2015

The main purpose of this study is to develop and apply a means of connecting reading movement and Newspaper In Education (NIE) activities utilizing the voluntary participation and cooperation of local school districts and autonomous government entities. This is necessary to revitalize or systematize the environmental social life of reading newspapers and NIE activity. Literary or inquiry research will be initiated in this study in order to quantify the current or actual conditions of this connection, delineating the basic objectives of this study, and determining the developmental directions for continuing this study as related to the connection of reading movement and NIE activity. Anticipated study activities or major tasks are as follows. First, develop a variety of intended programs and learning materials necessary for each. Secondly, develop and establish corresponding online data and educational programs. Thirdly, a "cooperation" system must be established and training programs implemented reinforcing these ideas. And, lastly (and to gain wider acceptance), starting a public relations campaign to show or illustrate the benefits of this study and these intended research activities. In conclusion, if a connection between reading movement and NIE activity are fully established and periodically adjusted by means of continuing discussions on the merits or concerns based on the study findings, the full potential of the reading movement connection with NIE activity will be realized and achieved to its truest meaning and/or highest order.

• The Southeast Asian review
• /
• v.28 no.3
• /
• pp.159-212
• /
• 2018

This paper is focused on analyzing the social environment of a rapidly changing on Vietnamese company. The key analysis of this study is on the change of perception in Vietnam and the regional difference of CSR acception. The social acceptance research of CSR is centered on the comparative analysis of Korean, Japanese and Chinese companies Social Activities in Vietnam. In addition, This paper seek to way of contribute to the sustainable development of Korean companies, and its harmonious cooperation with Vietnamese society through reviewing the CSR activities and direction of their CSR expectation. In the paper, linkage analysis was conducted with the results of the study on CSR value development process in Vietnam society and analysis of social responsibility values obtained from empirical studies. Through this, finally, we trying to search the value of social responsibility in Vietnam and its future directions. When we understand Vietnam's CSR, based on 'locality' of Vietnam, Northern and Southern can be understand on its different backgrounds. And it can be analyzed by their CSR characteristics of acception. As the result of this research, In the North, Foreign companies' CSR is understanded to be viewed from the corporate economic income and distribution. In the South, there is a strong tendency to understand CSR activities of foreign companies as marketing activities. On the whole, In northern Hanoi, there was a strong expectation in terms of 'employment improvement' and 'workers' working conditions'. In the South, there was a greater interest in improving the 'quality of life of residents' and 'consumer protection'. This is due to the influence of the economic system experienced during the process of different colonization, modernization and communization between the two regions. Since the Reform and Opening of Vietnam, Social Awareness of CSR seems that the regional differences were formed by the pace of economic development and the economic environment has played a role. In particular, the social acceptance of CSR values showed a slight difference in recognition between the North and South regions, but as both regions showed common hope for 'intervention in the role of government'. Therefore, Social Awareness of Vietnam's CSR is based on relation of 'government-society' formed from the 'Communitarianism'. As foreign investment flows more, CSR awareness and expectations in Vietnam's society will increase further. And the CSR expectations of local governments and stakeholder will be more complicated. It is time to check the needs of Vietnamese society in relation to locality of the social responsibility activities.

• Science of Emotion and Sensibility
• /
• v.23 no.2
• /
• pp.3-12
• /
• 2020

The purpose of this work is to suggest the optimal color temperature, which induces a sense of comfort for autonomous vehicle users through the analysis of biosignal using electroencephalography (EEG) and photoplethysmography (PPG). To achieve this purpose, we applied lighting with a color temperature of 3000 K, 4000 K, 5000 K, and 6000 K to the autonomous driving environment. We experimented in a laboratory equipped with a graphic driving simulator. The experimental procedure is as follows: 1) stabilization (5 min). 2) Uchida-Kraepelin test (3 min). 3) Automatic driving + lighting (3 min). This procedure was repeated four times under different color temperatures. We performed frequency analysis on a collected time-series data and calculated the power value for each frequency band through power spectrum analysis. In the case of EEG, we analyzed α- and β-waves, which are indicators of stability and arousal, respectively. In the case of PPG, we analyzed the sympathetic nervous system activity. To reduce deviations between the subjects, we normalized the data before analysis. The result of the first analysis revealed that α-wave increased only at 5000 K, while the β-wave increased at almost all color temperatures. In addition, in the case of PPG, sympathetic nervous system activity (SNSA) increased under driving conditions. The result of the second analysis revealed that the difference between β-wave and SNSA is insignificant. In conclusion, the increase in α-waves showed that EEG was most stable at 5000 K. The results of this study can be applied to the upcoming autonomous driving era to induce high driver satisfaction. Furthermore, this approach could eventually lead to the acceptance of autonomous vehicles by suggesting a positive effect of autonomous driving.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.1
• /
• pp.73-86
• /
• 2015

The use of complimentary indicators, other than radiation dose and risk, to assess the safety of radioactive waste disposal has been discussed in a number of publications for providing the reasonable assurance of disposal safety and convincing the public audience. In this study, the radionuclide flux was selected as performance indicator to appraise the performance of engineered barriers and natural barrier in the Wolsong low- and intermediate-level waste disposal facility. Radionuclide flux showing the retention capability by each compartment of the disposal system is independent of assumptions in biosphere model and exposure pathways. The scenario considered as the normal scenario of disposal facility has been divided into intact or degraded silo concrete conditions. In the intact silo concrete, the radionuclide flux has been assessed with respect to the radionuclide retardation performance of each engineered barrier. In the degraded silo concrete, the radionuclide flux has been explored based on the performance degradation of engineered barriers and the relative significance of natural barrier quantitatively. The results can be used to optimally design the near-surface disposal facility being planned as the second project phase. In the future, additional complimentary indicators will be employed for strengthening the safety case for improving the public acceptance of low- and intermediate-level waste disposal facility.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.319-325
• /
• 2016

This study was designed to develop a manufacturing process for ginseng concentrate with reduced unpleasant aroma and bitter taste. Two types of ginseng, white and red, were extracted under six different conditions (the 1st to the 6th step) of temperature ($65{\sim}95^{\circ}C$) and ethanol concentration (0~70%). Six extracts of each ginseng were evaluated by a sensory test, and assayed for crude saponin, ginsenosides, and acidic polysaccharides. The content of crude saponin in the extracts decreased with extraction time. There was no significant difference in the crude saponin content between white and red ginseng extracts. The yield of red ginseng extract was higher (45%) than that of white ginseng. No significant difference was observed in the acidic polysaccharide content between red and white ginseng extracts. $Rg_3$, a specific ginsenoside in red ginseng, was detected in the 1st to 6th extracts of red ginseng. Bitterness, astringency, and sourness of ginseng extracts decreased as the extraction steps proceeded. The composite of the 1st, 2nd, and 6th step extracts decreased bitterness and astringency, and the highest overall acceptance. Compared with commercial beverages, the composition of the three extracts is the desirable method to decrease the bitter and astringent tastes, and the overall unpleasant flavor of ginseng.

• The Korean Society of Law and Medicine
• /
• v.8 no.2
• /
• pp.205-290
• /
• 2007

In Korea, abortion in the Criminal Law is an illegal act in exception of limited cases stated in the Mother and the Child Health Law. There are grounds on which abortion may be carried out - though the grounds are very limited and related such as emergency situation of woman's physical health, rape, incest and genetic diseases. The Criminal Law regulates the mother's act of abortion and the doctor's surgical performance of abortion. The Mother and the Child Health Law prescribes the medical, ethical, and genetic grounds for the legal permission of abortion. Many people tend to abuse of abortion even though they are fully aware of its illegality. The law lead to be inconsistent with its enforcement. In this paper, I would like to suggest some proposals about the legal analysis of the Abortion Regulations to reform the existing regulations and increase the effectiveness of the regulations. A national survey was carried out using telephone interview with Korean citizens from August 1th to August 31th in 2005. A total of 1,025 citizens (male: female = 49.2%:50.8%) were randomly sampled in proportion to the number of population of 17 regions. The major findings of this survey were as follows. First, 91.4% of the respondents approved of abortion based on the medical grounds. Second 83.3% of the respondents perceived that abortion may be carried out based on ethical grounds for example rape. Third, 74.3% were agreed to abortion based on genetic diseases. Forth, 64.7% were approved the abortion that unmarried woman may be carried out. In contrast 45.0% were approved the abortion that girls may be carried out, whereas 46.4% were perceived that the abortion may not be permitted. Fifth, 58.3% were disagreed the permission of abortion based on social and economic grounds. According to the survey Korean citizens seem to have positive perception on the abortion that may be carried out based on medical, ethical and genetic grounds. Whereas they worried about the abortion based on social and economic grounds. Now the Mother and the Child Health Law prescribes the medical, ethical, and genetic grounds for the legal permission of abortion. But this law does not include social and economic grounds. In cases of when the mother has a impossibility to breed her child because of her social situations and financial conditions, we should accepted the legal acceptance of abortion due to social and economic grounds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.1064-1071
• /
• 2015

Viscous fermented red ginseng extracts were dried and coated using a fluidized bed coater to increase convenience and consumer acceptance. The methods for making spherical granules of fermented red ginseng extracts with increasing convenience were established by using indigestible dextrin. Spherical granules of fermented red ginseng extracts with increasing convenience were made by mixing indigestible dextrin at 40% (40% IDD), 50% (50% IDD), and 60% (60% IDD) versus the soluble solid content of fermented red ginseng extracts. Spherical granules of fermented red ginseng extracts showed less angle of repose than powder of fermented red ginseng extracts. This means that spherical granules of fermented red ginseng extracts had good fluency with increased convenience. The more indigestible dextrin showed higher yields. Although 50% IDD showed less yield than 60% IDD, 50% IDD was the best mixing ratio for making spherical granules of fermented red ginseng extracts, as fermented red ginseng extracts is known as a healthy food. The optimized operation conditions of the fluidized bed coater for making 50% IDD were feeding rate 0.54 mL/min, atomization air pressure 2.15 bar, and product temperature $83.03^{\circ}C$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.271-274
• /
• 2016

CT quality assurance imaging evaluation and enforcement as quantitative assessment by phantom image evaluation, assessment items include There are also contrasting the water attenuation coefficient, uniformity, noise, resolution, spatial resolution, 10mm slice thickness evaluation, contrast resolution, space for the resolution, the slice thickness evaluation, it is possible to estimate the error due to the evaluation by the subjective judgment of the tester, using a subjective error image processing program to be computed to minimize the objective evaluation. Basic recording conditions of the CT image quality control assessment is the same as special medical equipment quality control checks, the images were evaluated quantitatively using IMAGE J. For a CT attenuation coefficient, the uniformity, noise evaluation, were evaluated as CT quality control image the standard deviation of the measured value of the digital processing of image smaller and less noise uniform images than the, contrast and resolution assessment is the size of the diameter of a circle having a large the 1 inch, 0.75 inch, 0.5 inch quality if the diameter of the circle, was evaluated in the small circle in the near circle ellipse. Spatial resolution is evaluated by using a self-extracting features of an image processing program, all of the groups of members comprising the acceptance criteria to automatically extract, was evaluated to be very useful for the quantitative assessment. When CT image quality control assessment on the basis of the results such as the above, if using an image processing program to minimize the subjective judgment of the error evaluator and is determined more efficient than would be made quantitative evaluation.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.145-157
• /
• 2004

Microscopic freeway simulation models project the uncertain values of performance measures for subject traffic conditions by explaining drivers' driving behavior with lane changing and car-following models. However, the existing lane changing models are limited to gap acceptance oriented passive behavior of drivers and not able to capture more-or-less aggressive driving behavior(e.g. cut-in lane changing) ordinarily obseved in field. This paper suggests the definition of cut-inlane changing and presents its characteristics based on the findings from two different freeway on- and off-ramp sections. In addition, this paper proposes a new lane changing model capable of handling both passive and active drivers' driving behavior for better performance of simulations. The proposed lane changing model was tested with Hanyang Simulatin (HYTSIM), a microscopic freeway simulation program developed for this study. The HYTSIM simulation results reflecting the performance of the proposed lane changing model were compared against the field data. The test results showed that the distribution of gaps collected when vehicles change lanes were statistically identical to the field data at 95% confidence level.